1 / 34

industrial, organics, biological toxins

What Should Have Been on Your Christmas List This Year: Emerging Nanotechnologies for the Water Arena Richard Sustich University of Illinois at Urbana-Champaign (217) 265-0833 sustich@uiuc.edu. agricultural runoff - nitrates, phosphates, pesticides, herbicides, hormones. aquifer depletion.

nita
Download Presentation

industrial, organics, biological toxins

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. What Should Have Been on Your Christmas List This Year: Emerging Nanotechnologies for the Water ArenaRichard SustichUniversity of Illinois at Urbana-Champaign(217) 265-0833sustich@uiuc.edu

  2. agricultural runoff - nitrates, phosphates, pesticides, herbicides, hormones aquifer depletion scarcity, salting, salt water & pollutant intrusion into aquifers arsenic, salting, scarcity industrial, organics, biological toxins Challenges in Protecting/Developing Water Supplies

  3. Why Is It Important to Embrace Emerging Technologies Now? • “Replacement Era” presents unique opportunity to upgrade water/wastewater systems for increased efficiency and new technologies • Opportunity to build efficiency into upgrade/ replacement projects – need for guidance on “energy cost” of replacement options (i.e., power/pump technologies, treatment unit processes) • Opportunity for early diffusion of treatment and materials research results (pre-commercialization) • Opportunity to manage upgrade/replacement projects to incorporate new/emerging treatment technologies • Need to build in capacity to respond to short and long-term environmental changes (i.e., sourcewater degradation) and eventual direct reuse

  4. Advances in Trace Contaminant Removal

  5. Evolution of Adsorption Materials for Organic Contaminants • Background: • Existing Commercial Materials • Activated Carbon Granules • Activated Carbon Powders • Concerns: • Two Grades for Air or Water • Broad Pore Size Distributions • Contact Efficiency • Regeneration Granular Activated Carbon

  6. Activated Carbon Fibers • Synthesis: • Using a commercial crosslinked phenolic precursor fiber (Kynol) • Three grades: • 1500, 2000, 2500 m2/g • Key Features: • Greatly improved contact efficiency, much higher capacity and design flexibility. • But expensive; brittle Activated Carbon Fiber

  7. Control of Pore Surface Chemistry---Acidic/Basic and Polar/Non-polar • Key Features: • Can directly activate the phenolic fibers in presence of chemical reagent • Greatly improved selectivity with even higher capacity, but still expensive; brittle

  8. Control of Pore Surface Chemistry---Acidic/Basic and Polar/Non-polar ------ Effect of N in Carbon on Removal of HCL Adsorption uptake for HCl gas on ammonia-treated ACF) Key Features: Greatly improved selectivity with even higher capacity, but still expensive; brittle Carbon (2001), 39(3), 1809-20.

  9. Activated Carbon Fibers on Glass Fiber Substrate • Key Features: • Much lower cost, greatly simplified manufacture • Excellent wear resistance • Improved contact efficiency • Ease of regeneration Cost of Precursor Materials: Glass fiber: $0.4-0.5/lb Phenolic: $0.7/lb US patent 5,834,114

  10. Contaminant Removal to Below 1 ppb • Key Features: • Much lower cost, greatly simplified manufacture • Excellent wear resistance • Improved contact efficiency • Ease of regeneration • Similar results observed with TEX Breakthrough curves for benzene from both ACF and GAC filters Enviro. Sci. Tech., 2001, 35, 2844-2848 .

  11. Contaminant Removal to Below 1 ppb • Key Features: • Much lower cost, greatly simplified manufacture • Excellent wear resistance • Improved contact efficiency • Ease of regeneration • Similar results observed with TEX Benzene breakthrough curves on regenerated ACF filter Enviro. Sci. Tech., 2001, 35, 2844-2848 .

  12. Filters for Removing Trace Contaminants Enviro. Sci. Tech., 2001, 35, 2844-2848 J. Nanoparticle Research, 2005,7, 477-87 .

  13. Ion Exchange and Chelating Materials for Inorganic Contaminants • Background: • Existing Commercial Materials • Discovered in 1935 • Commercialized in 1940-50’ • Highly Successful Product • Today Research in Industry Greatly Reduced • Problems: • Fragile (Osmotic Shock) • Modest Contact Efficiency – Difficulties in Meeting EPA Standards for Hg2+, Pb2+, arsenate ion …… • Relatively Expensive Synthesis

  14. Cationic Fibers on Glass Substrate ------ Synthesis of Ion Exchange Fiber on Glass Substrate • Key Features Compared to Beads: • Simplified synthesis (1/2 the steps) • Resistance to osmotic shock • Outstanding breakthrough data for Hg2+, Pb2+, arsenate ion • 10  increase in rate of reaction / regeneration • Remove most ionic contaminants to well below EPA standards Fiber glass Oligomer Oligomer coating & curing ~ Room temperature functionalization Hydrochloric acid rinse Ion exchange fiber on glass substrate Polymers for Advanced Technologies (2001), 12(3-4), 197-205 US patent: Granted

  15. Cationic Fibers on Glass Substrate ------ Breakthrough Curves for Hg2+ • Key Features Compared to Beads: • Simplified synthesis (1/2 the steps) • Resistance to osmotic shock • Outstanding breakthrough data for Hg2+, Pb2+, arsenate ion • 10  increase in rate of reaction / regeneration • Remove most ionic contaminants to well below EPA standards Breakthrough Curves for Hg2+ (0.75 ppm Influent) Comparing Cationic Fiber and Beads Detected by Atomic Fluorescence Spectroscopy (AFS) Ind. Eng. Chem. Res., 2002, 41(25), 6436-42

  16. Cationic Fibers on Glass Substrate ------ Breakthrough Curves for Pb2+ • Key Features Compared to Beads: • Simplified synthesis (1/2 the steps) • Resistance to osmotic shock • Outstanding breakthrough data for Hg2+, Pb2+, arsenate ion • 10  increase in rate of reaction / regeneration • Remove most ionic contaminants to well below EPA standards Breakthrough Curves for Pb2+ (150 ppm Influent) Comparing Cationic Fiber and Beads Detected by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Ind. Eng. Chem. Res., 2002, 41(25), 6436-42

  17. Anionic Fibers on Glass Substrate ------ Breakthrough Curves for Arsenate (2.2 ppm) • Key Features Compared to Beads: • Simplified synthesis (1/2 the steps) • Resistance to osmotic shock • Outstanding breakthrough data for Hg2+, Pb2+, arsenate ion • 10  increase in rate of reaction / regeneration • Remove most ionic contaminants to well below EPA standards Breakthrough Curves for Arsenate (2.2 ppm Influent) Comparing Anionic Fiber and Beads Detected by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS)

  18. Advances in Disinfection

  19. 200 nm Novel Bactericides for Water Systems and Point-of-Use Applications Colloidal Ag on glass fiber can effectively kill E.coli, as opposed to Ag on carbon fiber substrates Silver on glass fiber

  20. Light Sensitized Oxidation Catalyst --TiON • Problems of TiO2: • UV requirement • Low degradation efficiency: low surface areas • Long reaction time • Incomplete reaction: intermediates • Application and recovery of powder photo-catalyst • Advantages ofNew Photo-catalyst TiON • Active under visible light • High photochemical efficiency • Immobilized on fiber substrate

  21. Light Sensitized Oxidation Catalyst --TiON • TiON powders, coatings, nanoporous fibers, and thin films were synthesized by chemical reaction, sol-gel, nanotemplating, and vapor phase deposition methods. The N concentration ranged from x < 1% to x > 50%. • TiON was capable of breaking down humic acid, benzene and killing E-coli bacteria and spore in water under visible light. Degradation of Spore in water comparing TiO2 and TiON under visible light Degradation of E-coli in Water

  22. Sensor Technologies and Information Systems

  23. Catalytic DNA Biosensors • Stable backbone w/ variable sensor binding sites • Highly selective/ high sensitivity • Already used for lead in Washington, DC drinking water assessment • Additional pollutants under development • Next – Deployable array platform and amplifier under development

  24. Sensicore WaterPOINT™ 870—Smart Sensors The chemistry is already on the chip. The Smart Sensor is a “Lab-on-Chip” where the chemistries are already embedded on a semi-conductor based platform. This chip is monitored by a single handheld computer employing four different measurement techniques to calculate 14 results. The Smart Sensor needs only 2.5 mL sample for all 14 analyses.

  25. Lab-on-Chip Technology • 4 different types of measurements on one chip • Sensor technology you are familiar with…only smaller • Potentiometric • ISE channels • pH, Carbon Dioxide • Calcium, Ammonium • Amperometric • Free & Total Chlorine, ORP • Conductometric • Conductivity • Resistive • Temperature

  26. Lab-on-Chip Technology Introduction pH ISE ORP/REDOX Conductivity NH4 ISE Free Chlorine Temperature Total Chlorine CO2 ISE Ca++ ISE

  27. Applications – Municipal Drinking Water • WaterPOINT efficiently profiles raw water at the source • Check the initial loading of pH, hardness, alkalinity and other fundamental measurements needed to understand before the water enters your treatment plant • WaterPOINT helps the operators choose the best water source, make more informed blending decisions, and optimize your treatment process

  28. Applications – Municipal Drinking Water • WaterPOINT helps operators monitor and adjust each phase of the treatment process before there is a problem • It serves as a field validation tool that allows to quickly check the performance of the on-line water quality and instruments • It helps to screen and troubleshoot the in-plant process more effectively • WaterPOINT speeds and simplifies the jar testing process used in all municipalities

  29. Applications – Municipal Drinking Water • The distribution system is the most vulnerable part of the water delivery process. It is susceptible to both ground water incursions and to contamination. • With WaterPOINT, troubleshooting has never been easier. • WaterPOINT enables incremental testing, identifies the extent of the contamination quickly and efficiently, and allows users to perform real-time post-event monitoring without having to drive samples back to the lab.

  30. Instant Data Visualization • Automated Mapping Interface • Automated Contouring with ISO-Concentrations for decision support • Graphic Data Analysis

  31. Instant Data Graphing • Graph Multiple Locations, Single Parameter • Graph Single Location, Multiple Parameters, Dates, Times

  32. Alarms & Alerts • Identify Locations That Need Corrective Action • Map Out and Identify Problem Areas/Lines • Automatically Be Notified of Parameters Outside of Acceptable Ranges, Via E-Mail, Cell Phone, or Pager

  33. Critical Questions • How can you stay on top of emerging technologies and keep your clients informed? • How can we optimize technology diffusion/adoption to maximize pubic benefit? • What are the barriers to widespread adoption of these technologies: • Regulatory? • Institutional management? • Public confidence/acceptance?

More Related