1 / 20

Chelmsford Amateur Radio Society Advanced Course (6) Propagation Part 2 – Propagation Modes

Chelmsford Amateur Radio Society Advanced Course (6) Propagation Part 2 – Propagation Modes. Introduction. Syllabus covers a wide range of propagation topics:- Key Aspects:- Solar Radiation creates the Ionospheric Layers Understand the layers and their variation and influence on HF

Download Presentation

Chelmsford Amateur Radio Society Advanced Course (6) Propagation Part 2 – Propagation Modes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chelmsford Amateur Radio Society Advanced Course(6) PropagationPart 2 – Propagation Modes

  2. Introduction Syllabus covers a wide range of propagation topics:- Key Aspects:- • Solar Radiation creates the Ionospheric Layers • Understand the layers and their variation and influence on HF • Understand various ionospheric propagation modes/terms • Other affects/modes that affect VHF and higher frequencies

  3. Solar Influence is key factor The Ionosphere • The Ionosphere comprises layers of ionised gases • Ionisation occurs due to input from Solar emissions • Sources include:- • Ultra-violet radiation • Solar wind particles • X-Rays • Whilst Light/UV is fairly constant, others do vary • The Earth’s rotation, orbit, and magnetic field also have a role

  4. Sunspots & Flares • A major long term variation is from the sunspot cycle (~11 year period) • More sunspots lead to higher ionisation in the ionosphere • These higher levels increase the range of refraction and usable frequencies at HF • However: If a solar flare gives a major Coronal Mass Ejection, this will upset the earths magnetic field leading to poor conditions on HF

  5. F2 F1 E D 400km Earth 70km HF and the Ionosphere VHF/UHF • Ionosphere is layers of Ionised Air: 70 - 400km above earth • HF is bent by ionosphere (refraction) - VHF+ passes through • Four Layers: D, E, F1, F2 – created by and vary with Solar input • Layers change with day/night, season, flares, sunspots etc HF

  6. Ionised Air Normal Air Wave Front Refraction C Velocity change results in a change of direction • The velocity of radio waves are slightly lower in air than in a vacuum • Ionised particles affect the velocity • They cause a small increase in velocity, causing the wave-front to veer and change direction • Higher frequencies are affected less, reducing their refraction Wave in the ionospheregets slightly faster A D B

  7. < > Ionosphere – D Layer D Layer: ~ 80km Height • The D layer tends to absorb the lower radio frequencies • During daylight hours it absorbs most radio energy below 3-4 MHz,though it can sometimes extend up to 14MHz • At night, it virtually disappears, making 80 metre (3.5 MHz) DX communications usable

  8. Sporadic-E gives single-hop VHF QSOs of ~2000km It is a difficult to predict short-lived event. > < Ionosphere – E Layer E Layer: ~ 120km Height • The E layer is more densely ionised and tends to refract rf • It varies with UV and X-rays, and quickly disappears, at night • Mainly affects up to 14MHz • Bursts of radiation can cause more intense refraction in the summer months • Sporadic E: Can occur from patches of highly ionised gas and refract 10m and VHF (6m, 4m, 2m)

  9. < > Ionosphere – F Layers F Layers: ~200 - 400km • The F Layers are highest and give longer distance refraction • During the day it ionises into two distinct layers:- • F1 at 200km • F2 at 300 - 400km • At night the two layers combine into a single F-Layer • F2 gives long distance propagation over 1000s of km • F2 enables 4000km distance in a single hop • Multi-hop gives worldwide communications

  10. HF Band Examples 3.5 MHz / 80 metres • Ionospheric propagation influenced by D-Layer absorption • Can be noisy, especially at night • Daytime: Ranges limited to a few 100 km • Nighttime: D-layer dissipates giving greater distances. Over 1600km may typically be achieved 21MHz / 15 metres • Sunspot Cycle has significant influence. Poor if numbers are low • The MUF can be below 21MHz – giving no propagation • Sunspot peaks will raise MUF for F-Layer DX propagation during the day and often into the evening up to 1000s km • After midnight, F-Layer thins further and propagation ceases Book has a fuller review, but only 3.5 and 21MHz is need for exam

  11. Critical Frequency • The critical frequency is the highest frequency that will returned to earth from an overhead vertical path • It is directly dependent on the level of ionisation above the observer – may be measured by ionospheric sounders • Sometimes called: Critical Frequency of Vertical Incidence • Typical figures are: • Summer: High 9MHz, Low 4MHz • Winter: High 14MHz, Low 3MHz • Note: Near Vertical Incidence Skywave (NVIS) exploits this for local communications coverage

  12. Maximum Usable Frequency (MUF) • The Maximum Usable Frequency (MUF) is the highest frequency that will be refracted over a particular path. • The MUF varies with 24hr day/night cycle, season etc • The MUF will always be higher than the critical frequency • Longer paths (with lower angles) will have a higher MUF • The MUF may be up to five times the critical frequency, depending on the angle • It is usually advantageous to use highest available frequency • The MUF varies with solar ionisation:- • Overnight the ionisation steadily falls resulting in much lower MUF, to as low as around 2MHz during a sunspot minimum. • At mid-day during the maximum of the sunspot cycle, it may reach 40MHz for a long hop.

  13. Lowest Usable Frequency (LUF) • Lower frequencies are more liable to absorption in the D layer • Some propagation charts give a lowest usable frequency to allow for this effect • If the LUF is greater then the MUF, No propagation by the ionosphere is possible

  14. Skip / Dead Zone • Between the skip distance and ground wave range is a region that can not be covered • This is known as the Skip or Dead Zone • It is quite easy to observe... • Tune to a distant station in QSO with someone in the UK • The distant station may be a strong signal, but the UK station is often totally inaudible, despite being located nearer to you

  15. Fading • Fading is caused by signals arriving at the receiver by slightly different paths - Multipath • The path lengths will vary, changing the received phase from each path • Differences in phase cause the signals to add or cancel • SSB, CW will fade/drop out, FM can become severely distorted • If two signals are 180° out of phase, fading results in full cancellation • The paths with vary with time and propagation mode leading to variable fading • Fading rates may be slow, fast or a hybrid combination

  16. Aurora Propagation Modes Main Propagation modes:- • Ground wave – at LF • Sky/Ionospheric waves – at HF • Tropospheric (space) waves – at VHF Shorter wavelength VHF/Microwaves can be affected by:- • Ducting from moist/warm air causing ‘lifts’ • Edge-diffraction • Aurora • Meteor trails • Building scatter / multipath • Scatter from aircraft, heavy rain

  17. Main Propagation Modes Ground Wave • Ground wave hugs the curvature of the earth but quickly gets weaker • Range over land is relatively short – but usable below 2MHz • Losses influenced by ground conductivity – best over sea water Sky or Ionospheric Wave • Sky wave is the primary mode of propagation from 1 - 30MHz • It is very dependent on the level of ionisation Tropospheric Wave (or space wave) • Primary propagation mode at frequencies above 30 - 40MHz • Occurs below the ionosphere but above the influence of the terrain • Water vapour and temperature variations cause radio waves to refract downwards slightly, following the curvature of the earth • Enables contacts somewhat greater than line of sight

  18. Above 30MHz lost to space Tropospheric Wave F2 F1 Ground Wave E Critical Frequency D MUF Signal Earth Tx Station LUF, MUF, Paths Summary LUF Absorption Skip/Dead Zone

  19. VHF/UHF Modes • Ducts: Moist or warm air layers, often associated with high atmospheric pressure, bend or trap waves giving propagation over longer distances • Ducts can be in mid-air or just above the sea surface, but antennas need to be in the duct to get strong signals • Knife Edge Diffraction: Waves bend around corners or hill tops, enabling communication between stations that may otherwise be obstructed • Shadowing: from buildings, hills gives patchy coverage • Scatter: can give signals for unlikely paths – in between buildings, from aircraft wings, rain clouds, moonbounce etc • Meteor Scatter: Ionised meteor trails reflect signals. Good on 2m and 6m • Aurora: On 6m, 4m and 2m, SSB voice loses tonal content, giving a whisper-like sound

  20. Re-Cap • Ionosphere & Propagation • 11 Year Sunspot Cycle • HF and the Ionosphere • Refraction • Ionosphere Layers: D,E,F (F1,F2) • HF Band Examples: 80m (3.5MHz) and 15m (21MHz) • Critical Frequency • Maximum Usable Frequency (MUF) • Lowest Usable Frequency (LUF) • Skip/Dead Zone • Fading • Main Propagation Modes • LUF, MUF & Propagation Paths • VHF/UHF Propagation Modes

More Related