1 / 15

Portable Control & Measurement Device D0727

Aviv Rosenberg Ben-Ami Zilber Supervisor: Boaz Mizrachi (Zoran) ‏. Portable Control & Measurement Device D0727. End of Part A Presentation 12/2008. Possibility of customization and extension of feature-set in HW & SW Possibility to assemble several versions of the device

nemo
Download Presentation

Portable Control & Measurement Device D0727

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Aviv Rosenberg Ben-Ami Zilber Supervisor: Boaz Mizrachi (Zoran)‏ Portable Control & Measurement DeviceD0727 End of Part A Presentation12/2008

  2. Possibility of customization and extension of feature-set in HW & SW Possibility to assemble several versions of the device Friendly interface (Cell-Phone like keyboard, LCD Display)‏ Portable and hand-held with internal rechargeable battery Support for USB and microSD card for data transfer Overview (Reminder...)‏ A versatile, multi-purposed, portable and low-priced measurement device that can instantly measure and display results, or store data for later re-evaluation. The device will be easy to use and will allow some degree of monitoring and control over its environment using various measurements. In addition,

  3. So Far... • Preliminary design and characterization. • Found necessary HW for all features. • Detailed mechanical design in a 6.1x10x2.5cm box, with 3D model ensuring all HW can fit in such a small device. • Electrical design for all possible hardware. • (in progress) Layout.

  4. Mechanical Design The device with closed top. Visible: Graphic LCD, Keypad, IRt/c, UV Sensor.

  5. Mechanical Design The device with open top. Visible: Graphic LCD, Keypad and Main PCB, USB Port.

  6. Mechanical Design The device with open top, LCD and Keypad removed. Visible: Main PCB, most sensors and components.

  7. Electrical Design Functional Block Diagram:

  8. Electrical Design Example Schematic: Accelerometer

  9. Electrical Design Example Simulation: Pressure Sensor

  10. Layout Suggested main PCB layout: Top

  11. Layout Suggested main PCB layout: Bottom

  12. Layout Actual main PCB layout: Top

  13. Layout Actual main PCB layout: Bottom

  14. To Do... • Finish PCB layout (mid of December)‏ • Send to production (January)‏ • Start basic SW while in production (~1 Month)‏ • End of production (before end of January)‏ • HW Test and Debug (1-2 Months)‏ • More SW (all remaining time)‏

  15. Any Questions...?

More Related