1 / 17

Uniform Circular Motion

This text explains the concept of uniform circular motion, including the characteristics, acceleration, centripetal force, and examples of calculations. It also clarifies the misconception of an outward centrifugal force and the importance of the inward centripetal force.

mvaldivia
Download Presentation

Uniform Circular Motion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sect. 5-2: Uniform Circular Motion

  2. v = |v| = constant • The motion of a mass in a circle at a constant speed. Constant speed  The Magnitude(size)of the velocity vector vis constant. BUT the DIRECTION of v changes continually! r r v  r

  3. A mass moving in circle at a constant speedis accelerating. Acceleration Rate of change of velocity a = (Δv/Δt) Constant speed  TheMagnitude(size) of the velocity vector vis constant.v = |v| = constant BUT the DIRECTIONof v changes continually! An object moving in a circle undergoes an acceleration!!

  4. Look at the change in velocity Δv in the limit that the time interval Δt becomes infinitesimally small & get: Similar triangles  (Δv/v) ≈ (Δℓ/r) AsΔt  0, Δθ  0, A B AsΔt  0, Δv   v & Δv is in the radial direction  a  aRis radial!

  5. (Δv/v) = (Δℓ/r) Δv = (v/r)Δℓ • Note that the (radial) acceleration is aR = (Δv/Δt) =(v/r)(Δℓ/Δt) As Δt  0, (Δℓ/Δt) v Radial Acceleration Magnitude: Radial Acceleration Direction:Radiallyinward! Centripetal  “Toward the center” Centripetal Acceleration Acceleration towardthe center.

  6. A typical figure for a particle moving in uniform circular motion, radius r (speed v = constant): v :Tangent to the circle always! a = aR: Centripetal acceleration. Radially Inward always!  aR vAlways!! aR= (v2/r)

  7. Period & Frequency • A particle moving in uniform circular motion of radius r(speed v= constant) • Describe in terms of the period T & the frequencyf: • PeriodT the time for one revolution (the time to go around once), usually in seconds. • Frequency f  the number of revolutions per second.  T = (1/f)

  8. A particle moving in uniform circular motion, radius r (speed v = constant) • Circumference = distance around = 2πr  Speed: v = (2πr/T) = 2πrf Centripetal acceleration: aR = (v2/r) = (4π2r/T2) This 2nd form is a valid result, but (in my opinion) it’s not all that useful!!

  9. Example 5-8: Acceleration of a revolving ball A 150-g ball at the end of a string is revolving uniformly in a horizontal circle of radius 0.600 m. The ball makes 2.00 revolutions per second. Calculate its centripetal acceleration. r r

  10. Example 5-9: Moon’s Centripetal Acceleration The Moon’s nearly circular orbit about the Earth has a radius of about 384,000 km and a period T of 27.3 days. Calculate the acceleration of the Moon toward the Earth.

  11. Centrifuge A centrifuge works by spinning very fast. This means there must be a very large centripetal force. The object at A would go in a straight line except for this force; instead, it ends up at B. Example 5-10: Ultra-Centrifuge The rotor of an ultracentrifuge rotates at 50,000 rpm(revolutions per minute). A particle at the top of a test tube is 6.00 cm from the rotation axis. Calculate its centripetal acceleration, in “g’s.”

  12. Sect. 5-3: Uniform Circular Motion; Dynamics • A particle moving in uniform circular motion, radius r (speed v = constant): • The Centripetal Acceleration: aR = (v2/r) , aR v always!! aR is radially inward always! • Newton’s 1st Law: Says that there must be a force acting! • Newton’s 2nd Law:Says that ∑F = ma = maR = m(v2/r)(magnitude) Direction: The total force must be radially inward always! For an object to be in uniform circular motion,there must be a net force acting on it. We already know the acceleration, so we can immediately write the force:

  13. A force is required to keep an object moving in a circle. If the speed is constant, the force is directed toward the center of the circle. So, the direction of the force is continually changing so that it is always pointed toward the center of the circle. Example:A ball twirled on the end of a string. In that case, the force is the tension in the string.

  14. A particle moving in uniform circular motion, radius r(speed v = constant) • The acceleration: aR = (v2/r), aR v always!! aR is radially inward always! • Newton’s 1st Law:There mustbe a force acting! • Newton’s 2nd Law:∑F = ma = maR= m(v2/r) The total force ∑Fmust be radially inward always!  The force which enters N’s 2nd Law  “Centripetal Force” (Center directed force) • NOTa new kind of force! Exactly what the centripetal force is depends on the problem. It could be string tension, gravity, etc. It’s a term for the right side of ∑F = ma, not the left side! (It’s simply the form of ma for circular motion!)

  15. Centripetal Force You can see that the centripetal force must be inward by thinking about the ball on a string. Strings only pull; they never push!! MISCONCEPTION!! The force on the ball is NEVER Outward (“Centrifugal”).It is ALWAYSinward(Centripetal) !!

  16. Note!! An outward force (“centrifugal force”) is NOT a valid concept! The force ON THE BALL is inward (centripetal).

  17. What happens when the cord on the ball is broken or released? There is no centrifugal force pointing outward!What happens is that the natural tendency of the object to move in a straight line (Newton’s 1st Law) must be overcome. If the centripetal force vanishes, the object flies off at a tangent to the circle. (As it should by Newton’s 1st Law!!)

More Related