1 / 7

Solid Oxide Fuel Cells

Solid Oxide Fuel Cells. By Raymond Adorno MEEN 3344 Material Science Taught by Dr. Peel. Introduction Solid Oxide Fuel Cells. What Are Solid Oxide Fuel Cells ? 2nd most developed fuel cell technology Application towards power for utilities What are Solid Oxide Fuel Cells made of?.

more
Download Presentation

Solid Oxide Fuel Cells

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Solid Oxide Fuel Cells By Raymond Adorno MEEN 3344 Material Science Taught by Dr. Peel

  2. IntroductionSolid Oxide Fuel Cells • What Are Solid Oxide Fuel Cells ? • 2nd most developed fuel cell technology • Application towards power for utilities • What are Solid Oxide Fuel Cells made of?

  3. Solid Oxide Fuel Cells • Ceramic Plates • Packed in multilayer disks • One cell consists of…. • …Anode • …Cathode • …Electrolyte • Two types… • Anode/Electrolyte Supported

  4. Fuel Type are Hydro Carbons (Ex Methane gas) Operates at very high Temp. from 800 to over 1000 (oC) Hydro Carbons oxidized at anode Oxygen is reduced at cathode creates ionic current through electrolyte.

  5. Example of use in power plant Exhaust is C02 and H20

  6. Shows the different operating temp. of common fuel cells Efficiency Vs Power graph Has Efficiencies as high as 70% Type Operating Temp. (Degrees Celsius) Solid Oxide 500-1000 Polymer Electrolyte 50-100 Molten Carbonate Alkaline 600

  7. References Mitchell Will Chemical Technology-Fuel Cells Vol. 1 p 193-243 Basu Rajendra, Frank Tietz, Oliver Teller and Egbert Wessel “Li, Fe, O as a cathode contact material for solid oxide fuel cells” Journal of Solid State Electrochemistry. Vol. 7 (July 2003) p. 416 Feurer Halmut, Joathan Margalit. “SOFC’s too hot to handle?” American Ceramic Society Bulletin Vol. 83 (July 2004) p12. Goodenough John. “Oxide-Ion Electrolytes” Annual Review of Materials Research Vol. 33 p.91. Kenward Michael. “The Power to Clean Up.” Professional Engineering Vol. 12 (June 1999) p31. “Solid Oxide fuel Cells- Ready for Market?” Eye for fuel cells Aug. 28, 2004 www.eyeforfuelcells.com “Complex topic simplified” Oct 10, 2004 www.benwiens.com Solid Oxide Fuel Cells (pic.) Oct 18, 2004 www.spice.or.jp.com Solid Oxide Fuel Cells (pic.) Oct 18, 2004 www.ept.ntnu.no/ te/sofc_no.htm

More Related