Concrete Blocks - Manufacturing, Types & Advantages by Mohta Cement

1. Concrete Blocks - Manufacturing, Types & Advantages Mohta Cement Private Limited www.mohtacement.com

2. Concrete Block Concrete Blocks are nowadays replacing bricks in masonry construction, especially in many multi-story buildings. They’re available in three types: solid, hollow, and cellular, widely used for building filler walls and boundary walls in RC structures. Concrete Blocks are usually constructed in larger sizes to hurry up block work and use less cement in joints than brickwork. If the share of voids is quite 25%, they're hollow blocks, and blocks with voids but 25% are perforated blocks only. www.mohtacement.com

3. Manufacturing of Concrete Blocks The BIS recommends a finer modulus of combined aggregate between 3.6 and 4 and coarse aggregates are 6 to 12 mm in size. Lean mixtures up to 1: 8 are commonly used. For concrete blocks, the concrete mix shouldn't exceed one a part of cement, which is six parts of the combined aggregate volume. Concrete Blocks are often handmade and may even be machined. The cast block is then covered within the cistern for a minimum of 14 days (the water must be changed a minimum of every 4 days). After curing, the blocks are dried in 4 weeks before getting used within the construction of masonry. They ought to be piled with voids within the horizontal direction to facilitate easy drying, or they need to be steam-dried. www.mohtacement.com

4. Types of Concrete Blocks • Hollow Concrete Blocks: HollowConcreteBlocks are alternatives to traditional bricks and stones in building construction. They’re lighter than bricks, easier to put. Compared to traditional bricks, they provide the advantages of uniform quality, faster construction speed, lower labor participation and longer durability. • Solid concrete blocks: Solid concrete blocks are one among the several precast concrete products utilized in construction. The term precast refers to the very fact that the blocks are formed and hardened before they're delivered to the work site. • Paver Blocks:Block Paving, also referred to as brick paving, may be a commonly used decorative method of pavement or hardening. The most advantage of bricks over other materials is that individual bricks are often picked up and replaced later. www.mohtacement.com

5. Advantages of Concrete Blocks • Rapid Execution of Work • Better Insulation Properties 1. 4. • Employment of Unskilled Labor • Increase in Floor Area 5. 2. • Good Bonding of Mortar & Plaster • Reduces Construction Cost 6. 3. www.mohtacement.com

6. About Mohta Cement Private Limited "Mohta Cement Pvt. Ltd.”, is a well-known Concrete Blocks ManufacturerinIndia,offered varied construction materials like - Solid Blocks, Paver Blocks, AAC Blocks, Fly Ash Bricks, and Cement are formed of the best quality. They have created many impressive growth and success records within the market thanks to their commendable product-line, sound facilities, and hard efforts. www.mohtacement.com

7. Contact Us Plot No.61-62, Sector No -3, Pithampur, Dhar - 454774 mohtacement.seo@gmail.com www.mohtacement.com 9179100321, 9179100321 www.mohtacement.com

8. Thank You www.mohtacement.com