1 / 13

Gears

Gears. Gears. Used to transfer energy from one place to another Rotary motion and force transferred from one part of a machine to another part Gear Wheel: a wheel with matching teeth around its edge Gear Train: two or more gear wheels that mesh

mirabel-isambero
Download Presentation

Gears

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gears

  2. Gears • Used to transfer energy from one place to another • Rotary motion and force transferred from one part of a machine to another part • Gear Wheel: a wheel with matching teeth around its edge • Gear Train: two or more gear wheels that mesh • rotary motion from one gear is transferred to another gear

  3. Driving Gear (Driver): supplies the driving force in a gear train • Driven Gear (Follower): The gear wheel that the driving gear applies it’s force to • Mesh: gears must mesh, or interlock neatly as they rotate

  4. Gears Can Increase Rotational Speed • A gear train can increase the rotational speed of a device • Ex. a hand mixer, bike • The driving gear is larger (has more teeth) than the driven gear so the driven gear travels faster Driving gear Driven gear

  5. Gears Can Decrease Rotational Speed • Reducing gears are drive trains that decrease the rotational speed of a device so they decrease speed • Ex. bicycle, car Driving gear Driven gear

  6. Gears can Change Direction • Parallel gears are the same size, so they have the same rotation speed, but they change the direction of the rotary motion • Drive wheel: clockwise; Driven wheel: counterclockwise • Ex car transmission

  7. Gears can change rotary motion into straight line motion Load

  8. Gears can transfer a rotary motion from one shaft to another without changing direction

  9. Mechanical Advantages of Gear Trains • To calculate the increase or reduction in rotational speed calculate the ratio of the size of the driving gear to the size of the driven gear • This is called the speed ratio

  10. Multiplying Gears Driving gear = 10 teeth = 2 Driven gear = 5 teeth The speed of the gear has been changed by a factor of 2, the driven gear will move twice as fast as the driving gear 5 teeth 10 teeth

  11. Reducing gears Driving gear = 4 teeth = 1/2 Driven gear = 8 teeth The speed of the gear has been reduced to ½ it’s original speed 8 teeth 4 teeth

  12. Sprockets • Sometimes gears are connected with a chain called a sprocket • Used to gain a multiplying effect, reduce effort or a parallel effect • The gears both rotate in the same direction • In a 10-speed bike there are 5 gears on the rear wheel and 2 gears on the pedal crank

  13. Wheel and Pinion • A gear train that has 2 different sized gears • Larger gear is called a wheel • Smaller gear is called the pinion • Ex. a push lawn mover: the wheels transfer power to the blades (the pinion) which move faster than the wheels

More Related