1 / 11

Voltage multipliers and charge pump devices

Voltage multipliers and charge pump devices. Romano Torres 6th March 2013. Step-up. Basically, uses a flying converter always connected to the input voltage:. Figure from reference [4]. Step-down. The flying capacitor is always connected to the output:. Figure from reference [4].

merle
Download Presentation

Voltage multipliers and charge pump devices

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Voltage multipliers and charge pump devices Romano Torres 6th March 2013

  2. Step-up • Basically, uses a flying converter always connected to the input voltage: Figure from reference [4]

  3. Step-down • The flying capacitor is always connected to the output: Figure from reference [4]

  4. TFT resistance Reference [5]

  5. Dickson’s charge-pump Ideal gain: Efficiency: Figure from reference [1]

  6. Voltage doubler design • Low parasitic capacitance • Low threshold voltage • Low output resistance Figure from reference [1]

  7. Analytically Efficiency: Reference [1]

  8. Analytically Gain: Output resistance: Reference [2]

  9. Different topologies Figures from reference [3]

  10. Bootstrapping • Possibility to use TFTs with smaller channel; • Could create lower parasitic capacitances and increase the voltage gain; Figures from reference [6]

  11. References • [1] D. Baberna, A. Cabrini, G. Torelli and M. Pasotti, “Efficiency Comparison between Doubler and Dickson Charge Pumps,” in Circuits and Systems IEEE International Symposium vol. 2, 2005, pp. 1891-1894. • [2] A. Cabrini, L. Gobbi and G. Torelli, “Theoretical and Experimental Analysis of Dickson Charge Pump Output Resistance,” in Circuits and Systems IEEE International Symposium, 2006, pp. 2749-2752. • [3] J. Starzyk. “A DC-DC Charge Pump Design based on Voltage Doublers,” in IEEE Transactions on Circuits and Systems-I: Fundamental Theory and Applications, 48:350–358, 2001. • [4] M. Wens and M. Steyaert. Design and Implementation of Fully-Integrated Inductive DC-DC Converters in Standard CMOS. Springer, 2011. ISBN 978-94-007-1435 • [5] A. Saiz-Vela, P. Miribel-Català, J. Colomer, M. Puig-Vidal and J. Samitier. ”Accurate Design of Two-Phase Voltage Doublers based on a Compact Mathematical Model,” in Circuits and Systems 5th Midwest Symposium, 2007, pp. 213-216. • [6] Y. Allasasmeh and S. Gregori, “Switch Bootstrapping Technique for Voltage Doublers and Double Charge Pumps,” in Circuits and Systems IEEE International Symposium, 2011, pp. 494-497.

More Related