1 / 17

Flow Line Regulations

Flow Line Regulations. 18 AAC 75.047. Alaska Department of Environmental Conservation Spill Prevention and Response Division Industry Preparedness Program. What is a flow line?. 18 AAC 75.990(173) "flow line"

merle
Download Presentation

Flow Line Regulations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Flow Line Regulations 18 AAC 75.047 Alaska Department of Environmental Conservation Spill Prevention and Response Division Industry Preparedness Program

  2. What is a flow line? • 18 AAC 75.990(173) • "flow line" • (A) means piping and associated fittings, including all valves, elbows, joints, flanges, pumps, and flexible connectors, • (i) containing liquid oil; • (ii) located at a production facility; and • (iii) that is installed or used for the purpose of transporting oil between a well pad or marine structure used for oil production and the interconnection point with a transmission pipeline; and • (B) includes all piping between interconnections, including multi-phase lines and process piping, except • (i) facility oil piping; and • (ii) transmission pipelines;

  3. What isn’t a flow line?

  4. How are flow lines regulated? • Design & construction standards • Corrosion monitoring & control • Preventative maintenance • Line markers • Removal from service requirements • Line supports • Compliance documentation & recordkeeping

  5. Design & construction standards • ASME B31 series industry standards for design and construction of pipe: • ASME B31.4, Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids • ASME B31.8, Gas Transmission and Distribution Piping Systems • Other “equivalent and nationally recognized standard” • Design & construction standards become effective 31 December 2008 (2 year phase-in)

  6. Corrosion monitoring & control • Industry standards • ASME B31.4, Chapter VIII • NACE RP0169-2002 for external corrosion control on submerged or buried lines • External corrosion control • Protective coatings on aboveground lines or corrosion-resistant material • Internal corrosion control program • Pigging, inhibitors, biocides, coatings, linings, etc. • Corrosion monitoring & control requirements become effective 31 December 2007 (1 year phase-in)

  7. Preventative maintenance • Choice – either: • Use a bundled pipe with an interstitial leak detection system, or • Have a preventative maintenance system in place • Preventative maintenance system • Consistent with ASME or API standards • Effective 31 December 2007 (1 year phase-in)

  8. Preventative maintenance program standards • Submerged lines • ASME B31.4, Chapters VII through IX • Buried lines • ASME B31.4, Chapters VII & VIII • Aboveground lines • API 570 (except Section 8) and • ASME B31.4, Chapters VII & VIII • All preventative maintenance programs must have procedures for management of change

  9. Line markers, removal from service, and pipe supports • Line Markers • One mile intervals and at each road crossing • Effective 31 December 2007 (1 year phase-in) • Removal from service • Pig, drain, or blow pipe to remove oil • Effective 31 December 2006 (now) • Pipe supports • ASME B31.4, Paragraph 421 • Effective 31 December 2006 (now)

  10. Documentation / Recordkeeping • Documentation of measures taken to comply with 18 AAC 75.047 • Corrosion control • Preventative maintenance • Maintain records for minimum of five years • Records must be available to ADEC upon request

  11. Other changes to 18 AAC 75, Article 1 that affect North Slope operations • Increased prevention training and documentation requirements • Revised regulations for aboveground oil storage tanks • field-constructed oil storage tanks • shop-fabricated oil storage tanks • Revised regulations for facility piping

  12. Prevention training • Moved into its own section and expanded • Personnel that inspect, maintain, operate oil storage and transfer equipment must be trained regarding company and state spill prevention measures • Job descriptions and training level needed • Keep training records for 5 years

  13. Aboveground storage tanks • Two types defined • Field-constructed storage tank • Constructed to API 650, API 12B, 12C, 12D, 12E, 12F, or 12P • Inspected to API 653 or API 12R1 • Shop-fabricated storage tank • Constructed to UL 142 or similar standard • Inspected to API 653 or STI SP001

  14. Facility oil piping • New definition: Piping and associated fittings originating from or terminating at a regulated oil storage tank or an exploration or production well • Three classes of facility oil piping, based on installation date: • Before May 14, 1992 – no construction standard applies • May 14, 1992 thru 2008 – protective coating and cathodic protection, all welded • 2009 or later – ASME B31.3, B31.4, or B31.8, or equivalent standard; cathodic protection per NACE standard • Inspection consistent with API 570 inspection standard by 2008

  15. Effective Dates • Regulations covering design and construction – go into effect in 2009 • Regulations covering operations and maintenance – go into effect in 2008 • Remaining regulations - December 30, 2006

  16. Questions? Craig Wilson Industry Preparedness Program Spill Prevention and Response Division Alaska Department of Environmental Conservation www.dec.state.ak.us/spar/ipp

More Related