70 likes | 280 Views
This proposal outlines the results of Phase 1 and the development plan for an acceleration-based fall detection system. It includes measuring accelerations, processing data, and a fall detection algorithm. The system utilizes a Lithium Polymer battery with high energy density and low weight. With specifications on battery life and power consumption, the proposal aims to enhance fall detection efficiency.
E N D
Fall Detection System Development Proposal phase 2
Results of Previous Phase Using acceleration signal of the body • Measure Accelerations (no other sensor necessary, but can be added if required) • Process data • Fall detection algorithm based on max difference formula
Battery • Lithium Polymer • Very high energy density • Low weight and high cell value (3.7V) • Distribution is possible with low capacity multiple cells • Specifications • Capacity: 160mAh • Weight: 3.5g • Dimesions: 12 X 35 X 5.5 mm
Battery Life • Some elementary calculations • Total current consumption: 500mA • Total power consumption @3.7V: 1.85mW • Battery discharged state: 20% or 3.5V • Battery charged state: 95% or 4.1V • Total power available: 75% of 160mAh • Estimated days of operation: 10days