1 / 21

CHATS 2019, S. Nicollet, TS/WEST TFC Quench

Thermohydraulic Analysis of Tore Supra / WEST TF Coil Quench : ASSOCIATED SMOOTH QUENCH OCCURRENCE IN TOKAMAK CHATS Workshop 08-13/07/2019 Szczecin, Poland S . Nicollet, A . TORRE, S. GIRARD, B. LACROIX, C. REUX, P. PROCHET CEA, IRFM, F-13108 Saint-Paul- lez -durance, FRance.

mdenton
Download Presentation

CHATS 2019, S. Nicollet, TS/WEST TFC Quench

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ThermohydraulicAnalysis of Tore Supra / WEST TF CoilQuench: ASSOCIATED SMOOTH QUENCH OCCURRENCE IN TOKAMAKCHATS Workshop08-13/07/2019Szczecin, PolandS. Nicollet, A. TORRE, S. GIRARD, B. LACROIX, C. REUX, P. PROCHETCEA, IRFM, F-13108 Saint-Paul-lez-durance, FRance • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  2. SUMMARY • 1) Tore Supra / WEST TFC, Cooling circuit and QuenchDetection System • 2) SuperMagnet (THEA and FLOWER) Model • 3) Energy Balance, Runawayselectrons & Initial QuenchEnergy • 4) Results: Helium Pressure, Voltage, Resistance, Joule Energy, Hot Spot Temperature, Heliumexpulsed Mass Flow, Thermal Flux • 5) Discussion on Associated SmoothQuenchOccurence in Tokamak • 6) Conclusion | PAGE 2 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  3. 1) TORE SUPRA / WEST TFC COIL AND QUENCH 18 Coils: 165 t I Nom : 1400A L tot : 613 H B Nom : 9T (4,5T at plasma radius) I Op : 1255A E tot : 479 MJ B Op : 8,1T (3,9T at plasma radius) SuperconductingCoils: F av. 2,6 m - 2,5 t 26 double-pancakes, 39 turns 2028 spires StainlessSteelthick Casing: Fext : 3,3 m - 6,6 t Monolithicconductor: NbTi/Cu/CuNi 2.8 x 5.6 mm 11000 filaments - 1400A The 18 NbTiToroidal Field Coils (TF) Tore Supra/West Tokamak cooled by staticsuperfluidhelium bath at 1.8 Kand carry I=1255A. The Tokamak is operating since 1988 (IRFM). 19th december 2017, end of Plasma N°52205, (14:02:59), a quench on TFC09 detected first on an heliumliquidlevel (TNL) has triggered a currentfastdischarge. The Voltage quenchdetection (V) was at that time nearly to betrigerred. | PAGE 3 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  4. 2.1) SUPERMAGNET AND THEA MODEL • SuperMagnetmodel developedfor the CoilWinding Pack (CICC-likeTHEA model) • Monolithicconductorsrepresentinglarge strandswithheliumvoid fraction of 0,36 • THEA Quench initiation at x= 2 m (Ltot=7,17 m ), whereB=5,5 T and Tcs = 7,5 K Estimation of transient Voltage ThresholdUmodel,t: CICC-like Friction factor, void fraction Vf=36,1%: Colburn-Reynolds Analogy, Heat Exchange coefficient: NbTiBottura’s Law for Jc: Bc20 = 14.292 T, Tc0 = 9.767 K, C0= 50454.38377 106 AT/m², α = 1.137, β = 1.135, γ = 2.467, n = 1.70 | PAGE 4 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  5. 2.2) FLOWER MODEL • Externalquench circuit modelled by FLOWER: tubes, cold/warm safety valves, burstdisk, magnetic valve with pressure set) • TFC09 cooledwith a statichelium bath (at Tini=2,5 K) • Artificiallyadded manifold (inlet + outlet) & zero initial mass flow • Necessity to reducedrastically time step in the calculations | PAGE 5 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  6. 3.1) ENERGY BALANCE AND RUNAWAY ELECTRONS ComparisonScheme: Calculation/Measurements, Runaway/THEA Runawayelectrons of High Energy (30 MeV): Code GEANT4 At Plasma end: disruption + runawaywhichcollided on outboard plasma facing components creating high neutron and gamma flux  Energy=6,84 kJ in thick casing & 1,3 kJ in Coil. Small initiation zone: 0,3< dL <0,5 m, dY ~0,24 m and dR ~ 1 cm withMinimum QuenchEnergy | PAGE 6 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  7. 3.2) INITIAL QUENCH ENERGY: MQE THEA Minimum QuenchEnergy (MQE) from 2,5K to Tcs= 6,5K • QuenchedconductorsNumber ~ 100 • N_Y=39  dY=0,24 m, • N_R=3 dR=7,4mm E_1,69-2,5 K/ E_2,5 K-Tcs ~ 7% total He mass & heatcapacity ~ 16% with convective heat exchange coefficient Hconv E_2,5 K-Tcs ~ 2 *THEA MQE (temperature gradients) AvailableEnthalpyfrom 1,69 to 2,5 K: Simple Model ) eY=2,8 mm and Ncond=20 (Y-axis) τcond= 0,62 ; 1,39 ; 2,6 ; 4,6 s at T= 3 ; 4 ; 5 ; 6 K | PAGE 7 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  8. 4.1) COIL HELIUM PRESSURE Measured and CalculatedQuenchHelium Pressure in the Coil • Depending of Minimum QuenchEnergy, initiation length, duration and Umodel,t, • the calculatedcoilhelium pressurehas been used as comparison. • Maximal measured Pressure : 0,9 MPa & « Quenched » initial Length : 0,3 < dLength < 0,5 m • Near x=2 m and over 2,6 s duration for dL=0,4 m and Umodel,t = 100 mV (Ncond=20) | PAGE 8 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  9. 4.2) ESTIMATION OF THE VOLTAGE Measured and CalculatedQuenchResistive Voltage • Maximal measuredVoltage : 1400 V & • Maximal Calculated Voltage = 1300 V for 2,6 s duration for dL=0,4 m and Umodel,t = 100 mV (Ncond=20) • SlowerExperimentaldecreasedue to additionalfield(Tdischarge=120 s) for non-quenchedCoils& • Cuppermagneto-resistanceEffect | PAGE 9 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  10. 4.3) ESTIMATION OF THE RESISTANCE Deducedfrom Voltage Measurements and CalculatedQuenchResistance • Maximal deducedfrom Voltage Measurements, Resistance : ~ 6 W • Maximal CalculatedResistance = 3,5 Wfor 2,6 s duration for dL=0,4 m and Umodel,t = 100 mV (Ncond=20) • SlowerCalculated Values due to additionalfield(Tdischarge=120 s) for non-quenchedCoils& • Cuppermagneto-resistanceEffect | PAGE 10 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  11. 4.4) JOULE ENERGY DISSIPATED DURING AND AFTER QUENCH Deducedfrom Voltage Measurements and CalculatedQuench Joule Energy • Maximal deducedfrom Voltage Measurements, Joule Energy : ~ 18 MJ • Maximal Calculated Joule Energy = 20 MJ for 2,6 s duration for dL=0,4 m and Umodel,t = 100 mV (Ncond=20) • Good agreement betweenexperimental and calculatedresults | PAGE 11 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  12. 4.5) HOT SPOT TEMPERATURE Deducedfrom Voltage Measurements and CalculatedQuench Maximal Temperature • Maximal deducedfrom Voltage Measurements, Maximal Temperature: ~ 100 K • Maximal CalculatedTemperature = 100 K for 2,6 s duration for dL=0,4 m and Umodel,t = 100 mV (Ncond=20) • Good agreement betweenestimated (fromexperiments) and calculatedresults | PAGE 12 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  13. 4.6) HELIUM EXPULSED MASS FLOW QuenchCalculatedExpulsedHelium Mass Flow : • Opening of the cold safety valve and increase of Pressure  70 % of the 200l Heliumexpulsed in 5 s ! • Massflow of 5 to 6 kg/s (total helium mass ~ 30 kg = 25 kg in coil + 5 kg in cold tube) • Onlysmalleffect of quench conditions on mass flow (soundvelocity at outlet) • Decoupling of thick casing refrigeration circuit fromrefrigerator system smoothing of heatloads & TmaxHe thick casing : 27K. | PAGE 13 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  14. 4.7) HEAT FLUX DURING QUENCH • TS/WEST Quench Propagation Velocity 0,45 m/s (4 s to « inlet at 1,8 m & 11 s to « outlet » at 5,37 m) • Heat Flux average value near 0,15 W/cm² • SuperfluidHeliumStabilizingDisturbance (G. Claudet, 1979): 0,36 W/cm² (4,2 K) & 0,7 W/cm² (1,8 K) • LHC prototype magnet string heliumrecovery (Chorowski, 1998): few W/cm² | PAGE 14 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  15. 5) Discussion on Associated Smoothed Quench Occurrence in Tokamak ITER TFC Supercriticalheliumforced flow TS/ WEST TFC StaticsuperfluidHelium Bath JT-60SA TFC Supercriticalheliumforced flow Thermal Flux (W/cm²) vQ= 0,45 m/s 4 s to « inlet »& 11 s to « outlet » [CHATS, 2019] Bath All directions propagation Transversally Propagation (adjacent pancakes): < 1 s Normal Length (m) 16,1 < vQ < 22,6 m/s 113 m in 5 to 7 s [MT25, 2017] Quench Propagation Velocity vQ =20 m/swithpeaks at 70 m/s 380 m in 19 s [SOFT, 2010] CICC supercriticalheliumforced flow TransversallyPropagation(adjacent pancakes): >5 s for JT-60SA & 20 s for ITER Criticality and possible occurence of « smooth » quenchwithsmallheatdepositionlength at lowfieldregion (TS/WEST)  impact could lead to exceedsafety design « hot spot » criteria (ITER) [CEC-ICMC 2013] | PAGE 15 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  16. 6) CONCLUSION • A new SuperMagnetmodel has been successfullydeveloped for a Coil(CICC-like THEA model)cooled in staticsuperfluidhelium bath (Tini=2,5 K, Pini=0,13 MPa) • Depending of Minimum QuenchEnergy, initiation length, duration and model transientthreshold Voltage, the calculatedcoilhelium pressurehas been used as comparison. • The initiation zone issmall: dLength ~0,4 m (2,6 s duration & Umodel,t=100 mV , Ncond,ini=20) • Maximal Voltage ~ 1300 V & Maximal Resistance ~ 4 Ω (differencecaused by discharge time constant of non-quenchedcoils), Maximal Joule Energy ~ 20 MJ, Hot Spot temperature ~ 100 K (good agreement) • Calculatedexpulsedhelium mass flow rate of 6 kg/s confirms the observations • Thermal Heat Flux ~0,15 W/cm² and Quench Propagation velocity ~ 0,45 m/s • This eventconfirms the criticality and the possible occurrence of a socalled « smoothquench » caused by small initial heatdepositionlength at lowfieldregion. • The secondarydetection by thermohydraulicsignalsis more rapidthan the socalledprimarydetection by Voltage (2V, 1s) • This isusefull for other Tokamak magnetsquenchstudies and safeoperation • Aftercompleteelectrical, thermohydraulical and mechanicalanalysis and tests, WEST TFmagnetintegrity has been confirmedand has reoperated in 2018. | PAGE 16 • CHATS 2019, S. Nicollet, TS/WEST TFC Quench

  17. THANK YOU FOR YOUR ATTENTION Commissariat à l’énergie atomique et aux énergies alternatives Centre de Cadarache| 13108 Saint Paul Lez Durance Cedex T. +33 (0)4 42 25 62 25 | F. +33 (0)4 42 25 26 61 Etablissement public à caractère industriel et commercial | RCS Paris B 775 685 019 DSM IRFMSTEP 21-22 January 2015

  18. A-5.1) TORE SUPRA/ WEST QUENCH TFC09 (DECEMBER 2017) FEEDBACK (1/2) SOFT 2018 POSTER: ANALYSIS OF TORE SUPRA / WEST TOROIDAL FIELD COIL QUENCH AND THERMOHYDRAULIC MODEL WITH SUPERMAGNET Toroidal Field (TF) system of Tore Supra/West Tokamak: 18 NbTisuperconductingcoils, cooled by a staticsuperfluidhelium bath at 1.8 K carrying a current of 1255A. The Tokamak is operating since 1988 in CEA/IRFM 19th december 2017, at end of Plasma N°52205, (14:02:59), a quench on TFC09 detected first on an heliumliquidlevel (TNL) has triggered a currentfastdischarge. The Voltage quenchdetection (V) was at that time nearly to betrigerred. • SuperMagnetmodel has been developedfor a Coil(CICC-like THEA model)cooled in staticsuperfluidhelium bath (Tini=2,5 K, Pini=0,13 MPa) | PAGE 18 • RST, JT-60SA Résultats Tests & Modélisations TFC, 20/05/2019, S. Nicollet

  19. A-5.2) TORE SUPRA/ WEST QUENCH TFC09 (DECEMBER 2017) FEEDBACK (2/2) dL=0,3 m dY = 0,26 m dR= 2 cm Runawayelectrons of High Energy (30 MeV): GEANT4, At Plasma end: disruption + runawaycolliding on outboard plasma facing components creatinghigh neutron & gamma flux  E=6,84 kJ (thick casing) & 1,3 kJ (Coil). • Depending on Minimum QuenchEnergy, initiation length& duration,calculatedcoilheliumpressureusedas comparison. • Small initiation zone: 0,3<dL<0,5 m, dY~0,24 m and dR ~ 1 cm. • Calculated = Observedexpulsedhelium mass flow=6 kg/s • This eventconfirms the criticality and the possible occurrence of a socalled « smoothquench »caused by small initial heatdepositionlength at lowfieldregion. • Secondarydetection by thermohydraulicsignalsmore rapidthanprimarydetection by Voltage (2V, 1s) • Aftercompleteelectrical, thermohydraulical and mechanicalanalysis and tests, WEST TFmagnetintegrity has been confirmedand has reoperated in 2018. CHATS 2019 PAPER: THERMOHYDRAULIC ANALYSIS AND MODELS OF TORE SUPRA / WEST TF COIL QUENCH AND ASSOCIATED SMOOTH QUENCH OCCURRENCE RISKS IN TOKAMAK | PAGE 19 • RST, JT-60SA Résultats Tests & Modélisations TFC, 20/05/2019, S. Nicollet

  20. A-5.3) ITER QUENCH STUDIES and Calculation FEEDBACK: Hot spot for smoothquench • Range inductive voltage is [-0.1 V ; 0.1 V] • Range of resistive voltage threshold Vr= 0.2 V • Current decay will be initiated only after an action time Ta = Th + Tk + Tcb= 1.5 s pancake #8 (counter clockwise direction) at plasma end of burn, CICC Length =380 m Heat Input (173-174 m or 173.00-173.05 m) • TCO temperature (210 K) exceed the criterion of 150 K which is not respected. • Note: Thermal gradient between strands and jacket is nearly 40 K. • These results should be discussed considering also the likelihood of such a quench • Tore Supra /WEST Quench Feedback Smooth Quench appears near inner turns • (near CICC helium inlets) | PAGE 20 • RST, JT-60SA Résultats Tests & Modélisations TFC, 20/05/2019, S. Nicollet

  21. A-5.4) ITER QUENCH STUDIES and Calculation FEEDBACK: DETECTION by mass flowS On CICC Coils and especially JT-60SA (and ITER): complexquenchdetection,forced flow, possibility of « smooth » quench and « slow » propagation • 2 ITER-IO / CEA Contracts, Support Site Agreement, 2012-2015 •  Modelisation and analyses of quench of all cryo-magnetic system of ITER Tokamak • Proposed Classification of quench cases as a function of impacts/risks on Magnets • Aim: Assure the security of the Installation(ETF= 40 GJ and secondary detection “safety class”) • Recommendation of secondary quench detection based on He mass flows measurements • Question ?: Possibility for JT-60SA of quench detection studies based on “Cryogenic Sensors” (Signals from Cryogenic System) even far from the coil (several –tens- meters) Local Perturbation  propagation of the normal zone (quenched) Inlet He Outlet He • S. Nicollet et al., Thermal Behaviour and Quench of the ITER TF System during a Fast Discharge and Possibility of a Secondary Quench Detection, IEEE Trans. Appl. Superc., Vol. 22, N° 3, 2012. • S. Nicollet et al., Quench of ITER PFC Influence of some initiation parameters on thermohydraulic detection signals and main impact on cryogenic system, Cryogenics Vol 53, pp. 86-93, 2013. TFC 310 t H=17 m B=11,8 T Cold Terminal Box CTB 17 m Localisation of Thermohydraulic sensors, ~20 m Coil inlet Difference He mass flow, TCO, TF quenchwithoutFastDischarge | PAGE 21 • RST, JT-60SA Résultats Tests & Modélisations TFC, 20/05/2019, S. Nicollet

More Related