1 / 30

A Fast-Hopping Single-PLL 3-Band MB-OFDM UWB Synthesizer

A Fast-Hopping Single-PLL 3-Band MB-OFDM UWB Synthesizer. Remco C. H. van de Beek, Member, IEEE, Domine M. W. Leenaerts, Fellow, IEEE, and Gerard van der Weide. Presented by Romi Fan. Abstract. A 3-band (mode 1) multiband- OFDM UWB synthesizer implemented in a 0.25-um SiGe BiCMOS process.

may
Download Presentation

A Fast-Hopping Single-PLL 3-Band MB-OFDM UWB Synthesizer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Fast-Hopping Single-PLL 3-Band MB-OFDM UWB Synthesizer Remco C. H. van de Beek, Member, IEEE, Domine M. W. Leenaerts, Fellow, IEEE, and Gerard van der Weide Presented by Romi Fan EE306 RFIC R&F Lab

  2. Abstract • A 3-band (mode 1) multiband-OFDM UWB synthesizer implemented in a 0.25-um SiGe BiCMOS process. • Crucial in the design is a divide-by-5 frequency divider that generates quadrature signals at a frequency of 528 MHz . • The 0.44 mm2fully integrated synthesizer consumes 52mW from a 2.7 V supply. Out-of-band spurious tones are below 50 dBc . • The measured frequency transition time is well below the required 9.5 ns. OFDM : Orthogonal Frequency Division Multiplexing EE306 RFIC R&F Lab

  3. Outline • Introduction • The single-PLL Architecture • A.Divide-by-1.5 • B.Divide-by-5 • Measurements • VCO Design • Conclusion EE306 RFIC R&F Lab

  4. LTCCLow-Temperature Cofired Ceramics SAW Surface Acoustic Wave ISM Industrial Scientific Medical U-NII Unlicensed National Information Infrastructure UWB UltraWideBand BPF Bandpass Filter EE306 RFIC R&F Lab

  5. f(t)=A Bcosωtcos(ωt+θ) EE306 RFIC R&F Lab

  6. Introduction • UWB is now becoming an industrial standard in the 3–10 GHz frequency range under IEEE802.15.3a (WPAN) . • The multi-band OFDM alliance (MBOA) proposal divides the spectrum into 14 channels (bands) with a spacing of 528 MHz [1], [2] (see Fig. 1), using quadrature phase shift keying (QPSK)-OFDM, where high data rates of up to 480 Mb/s are achieved . EE306 RFIC R&F Lab

  7. Introduction EE306 RFIC R&F Lab

  8. Introduction • To allow co-existence with WLAN applications operating in 2.4 GHz ISM (e.g., IEEE 802.11b/g and Bluetooth) and 5 GHz ISM (e.g., IEEE 802.11a), spurious tones in or near these frequency ranges should be below 45 dBc and 50 dBc, respectively, to avoid harmful down-conversion of strong out-of-band interferers into the wanted bands. In-band spurious tones should be below 30 dBc to allow co-existence with other UWB systems. EE306 RFIC R&F Lab

  9. Introduction • [5] D. Leenaerts et al.,“A SiGe BiCMOS 1 ns fast hopping frequency synthesizer for UWB radio,” in IEEE ISSCC Dig. Tech. Papers, 2005,pp. 202–203. PLL&BiCmos performance • [6] C.-C. Lin and C.-K. Wang,“A regenerative semi-dynamic frequency divider for mode-1 MB-OFDM UWB hopping carrier generation,” in IEEE ISSCC Dig. Tech. Papers, 2005, pp. 206–207. Dividers • [7] A. Ismail and A. Abidi,“A 3.1 to 8.2 GHz direct conversion receiver for MB-OFDM UWB communication,” in IEEE ISSCC Dig. Tech. Papers, 2005, pp. 208–209. BiCmos performance • [8] B. Razavi et al.,“A 0.13umCMOS UWBtransceiver,” in IEEE ISSCC Dig. Tech. Papers, 2005, pp. 216–217. EE306 RFIC R&F Lab

  10. Introduction Ref[5] EE306 RFIC R&F Lab

  11. Introduction Ref[6] EE306 RFIC R&F Lab

  12. Introduction Ref[7] EE306 RFIC R&F Lab

  13. Introduction Ref[8] EE306 RFIC R&F Lab

  14. Introduction • Miller divider Tai-Cheng Lee and Yen-Chuang Huang,“A Miller Divider Based Clock Generator for MBOA-UWB Application,” in Symposium on VLSI Circuits Digest of Technical Papers, 2005, pp. 34–37. EE306 RFIC R&F Lab

  15. The single-PLL Architecture EE306 RFIC R&F Lab

  16. The single-PLL ArchitectureA.Divide-by-1.5 EE306 RFIC R&F Lab

  17. The single-PLL ArchitectureB.Divide-by-5 EE306 RFIC R&F Lab

  18. The single-PLL ArchitectureB.Divide-by-5 EE306 RFIC R&F Lab

  19. The single-PLL ArchitectureB.Divide-by-5 EE306 RFIC R&F Lab

  20. The single-PLL ArchitectureB.Divide-by-5 EE306 RFIC R&F Lab

  21. VCO Design • The 7920 MHz LC-oscillator uses an on-chip inductor for low phase noise and power dissipation. The 0.6 nH single-turn differential inductor is realized using the 3 um-thick top metal layer on a deep trench isolation g rid. • The VCO consumes 4.8 mA from a 2V on-chip supply regulator. The measured VCO phase noise is -97 dBc/Hz at an offset frequency of 1 MHz. EE306 RFIC R&F Lab

  22. VCO Design EE306 RFIC R&F Lab

  23. Measurements • The synthesizer has been implemented in a 0.25-um SiGe BiCMOS process with an NPN ft of 70 GHz. • The synthesizer (excluding the 1.056 GHz clock generator and the 50 Ω measurement buffers) draws 19.3 mA from a 2.7 V supply (52 mW). • The close-in phase noise is below 90 dBc/Hz and the VCO phase noise is below 120 dBc/Hz at 10 MHz offset. EE306 RFIC R&F Lab

  24. Measurements EE306 RFIC R&F Lab

  25. Measurements EE306 RFIC R&F Lab

  26. Measurements EE306 RFIC R&F Lab

  27. Conclusion • The 52 mW power dissipation is better than other reported BiCMOS solutions and is close to the 45 mW reported for the CMOS concept in [8](105mW). • The spurious tones performance of the proposed divide-by-7.5 is better than the one reported in [6] where levels of -20 dBc were reported. The complete design enables co-operability with WLAN/WPAN applications in the 2.4 GHz and 5 GHz frequency bands. EE306 RFIC R&F Lab

  28. PMOS NMOS Metal-2 Plug-2 IMD-1 Via-1 Metal-1 Plug-1 ILD Contact Gate&Gox STI N & P Well I/O Core Core I/O Capacitor PMOS Resistor PMOS NMOS NMOS EE306 RFIC R&F Lab

  29. EE306 RFIC R&F Lab

  30. Thanks for your attention. EE306 RFIC R&F Lab

More Related