1 / 30

Radiographic Quality

Recorded Detail Laura Herz , BA, RT(R). Radiographic Quality. Recorded Detail. Definition: degree of geometric sharpness or accuracy of the structural lines actually recorded in the image One of two geometric properties of radiographic image quality Also known as: Definition Sharpness

mateo
Download Presentation

Radiographic Quality

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Recorded Detail Laura Herz, BA, RT(R) Radiographic Quality

  2. Recorded Detail • Definition: degree of geometric sharpness or accuracy of the structural lines actually recorded in the image • One of two geometric properties of radiographic image quality • Also known as: • Definition • Sharpness • Resolution • Detail

  3. Recorded Detail • Poor resolution on the radiographic image is seen as a lack of sharp definition • Penumbra: geometric unsharpness around the periphery of an image • All radiographic images have less recorded detail than the actual object being imaged • Radiographer’s Goal: to control the degree of unsharpness or penumbra so it does not interfere with image diagnosis

  4. Unit of Recorded Detail • Primary unit of resolution: line pairs per millimeter (lp/mm) • Human visual acuity: 5 lp/mm

  5. Assessing Recorded Detail • Simple Evaluation: • Trabeculae of bone is an excellent guidepost to image resolution • Absence of blur/motion • Mathematical Evaluation: • Line Spread Function (LSF): complex mathematical measurement of the boundaries of an image • Modulation Transfer Function (MTF): mathematical assessment of the performance of an imaging system • MTF = information recorded ÷ information available

  6. Factors Affecting Recorded Detail • Motion • Materials • Geometry

  7. Motion • Motion fails to permit enough time for a well-defined image to form • Voluntary • Under direct control of patient • Involuntary • Not under direct control of patient; heartbeat, peristalsis, tremors, babies • Equipment

  8. Motion • Voluntary motion controlled by: • Communication • Instructions should be clear, concise, and understandable • Immobilization/comfort devices • Foam pads, angle sponges, blankets, sand bags, tape compression, commercial immobilizers, human immobilizers • Reduction in exposure time

  9. Motion • Involuntary motion controlled by: • Reduction in exposure time

  10. Reducing Exposure Time Shortens length of exposure to compensate for involuntary and/or voluntary motion

  11. Increase mA to Reduce Exposure Time • Density can be maintained with an increase in mA and a proportional decrease in time • Each exposure will then use the same mAs • mAs = mA x time • 100 mAs = 100 mA x 1 sec • 100 mAs = 400 mA x .25 sec mAs mA X time

  12. Increase Screen Speed to Reduce Exposure Time • Each screen speed produces a different density on the radiograph • Greater the screen speed, the greater the density • Greater screen speed requires a decrease in mAs to maintain density  decrease in mAs indirectly causes a decrease in exposure time Old screen speed New mAs = New screen speed Old mAs

  13. Increase Screen Speed to Reduce Exposure Time • You take a radiograph utilizing 40 mAs and a 200 screen speed. In order to produce the same density with a 400 screen speed, what would your mAs need to be?

  14. Decrease SID to Reduce Exposure Time • Inverse Square Law • Intensity of radiation is inversely proportional to the square of the distance from the source of radiation • There is an inverse relationship between the SID and the radiation intensity at the film Intensity 1 Distance 2² = Intensity 2 Distance 1²

  15. Decrease SID to Reduce Exposure Time • To maintain density, if the SID decreases, the mAs must be decreased  decrease in mAs indirectly causes a decrease in exposure time • Density Maintenance Formula Old mAs Old distance² = New distance² New mAs

  16. Decrease SID to Reduce Exposure Time • You take a radiograph utilizing 400 mA at .05 seconds at a 72” SID. A new radiograph is taken at a 36” SID. What would the new mAs need to be to maintain density? • What would be the new time?

  17. Increase kVp to Reduce Exposure Time • Kilovoltage (kVp) is the controlling factor for radiographic contrast • Determines the quality or penetrating power of the beam • There is a direct relationship between kVp and density

  18. Increase kVp to Reduce Exposure Time • To maintain density, if the kVp decreases, the mAs should increase • To maintain density, if the kVp increases, the mAs should decrease  decrease in mAs indirectly causes a decrease in exposure time • 15% Rule for maintaining density: • If the kVp is changed by 15%, the mAs should be changed by a factor of 2 • If kVp is decreased by 15%, mAs should be doubled • If kVp is increased by 15%, mAs should be cut in half

  19. Increase kVp to Reduce Exposure Time • You take a radiograph utilizing 100 mA at 1 second with 70 kVp. You increase your kVp to 80. What is your new mAs? • What would be the new time? • You further increase your kVp to 92. What is your new mAs? • What would be the new time?

  20. Materials • Film • Intensifying Screens • Poor Film-Screen Contact

  21. Materials • Film • Always some loss of detail with the use of film, however, all films employed in radiography are capable of resolving far greater lp/mm than the human eye is capable of visualizing

  22. Materials • Intensifying Screens • Phosphor size and phosphor layer have an influence on recorded detail • As phosphor size and layer thickness increase, screen speed increases • As phosphor size and layer thickness increase, recorded detail decreases

  23. Materials • Intensifying Screens • Quantum Mottle: grainy or blotchy appearance caused by insufficient photons (insufficient mAs) striking the image receptor; refers to the fact that the image is intensified (converted to light and made brighter) rather than produced only by x-ray photons • Often noticed with increasing screen speeds or increasing kVp

  24. Materials • Poor Film-Screen Contact • Increased distance between the intensifying screen phosphors and the film • Amplifies existing unsharpness and reduces recorded detail • Calculating the effect on recorded detail: X Old Unsharpness Poor Film-Screen Contact²

  25. Geometry • Focal Spot Size • SID • OID

  26. Geometry • Focal Spot • Area on the anode of the x-ray tube that is hit with electrons from the filament • All x-ray photons in the beam originate from this point

  27. Geometry

  28. Geometry • If the focal spot is smaller, the image will be less spread out and will appear sharper on the radiograph • If the focal spot is smaller, the greater the heat applied to that point on the anode, which results in limitations when selecting the focal spot size • Tube Rating Charts • Anode Cooling Charts

  29. Geometry • SID • Recorded detail is increased/improved when the source to image receptor distance (SID) is increased

  30. Geometry • OID • Recorded detail is increased/improved when the object to image receptor distance (OID) is decreased • Calculating Geometric Unsharpness: Focal Spot Size x OID SOD

More Related