1 / 18

Chapter 5

Chapter 5. Flip Flop. Flip Flop. Flip flop is the most important memory element and its made of an assembly of logic gates. NAND Gate Latch. NAND Gate Latch. EXAMPLE 5-1. The waveform below are applied to NAND latch. Assume initially Q=0, and determine Q waveform. NOR GATE LATCH.

marty
Download Presentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 5 Flip Flop

  2. Flip Flop • Flip flop is the most important memory element and its made of an assembly of logic gates.

  3. NAND Gate Latch

  4. NAND Gate Latch

  5. EXAMPLE 5-1 • The waveform below are applied to NAND latch. Assume initially Q=0, and determine Q waveform.

  6. NOR GATE LATCH

  7. Example 5-3 • Assume that Q=0 initially, determine the Q waveform for the NOR latch input shown below:

  8. Clock Signals & Clocked Flip-Flop • In synchronous systems, the exact times at which any output can change states are determined by a signal called the Clock. • When the clock changes from 0 to 1, this is called positive-going transition (PGT). • When the clock changes from 1 to 0, this is the negative going transition.

  9. Clock Signals & Clocked Flip-Flop

  10. CLOCKED S-C FLIP FLOP

  11. CLOCKED S-C FLIP FLOP

  12. CLOCKED J-K FLIP FLOP

  13. CLOCKED D FLIP FLOP

  14. D-LATCH (TRANSPARENT LATCH)

  15. EXAMPLE: Determine Q waveform for the given EN and D inputs.

  16. ASYNCHRONOUS INPUTS • Asynchronous inputs can be used to set the FF to the 1 state or clear the FF to the 0 state at any time.

  17. Example:

More Related