1 / 18

CE 201 - Statics

CE 201 - Statics. Chapter 7 – Lecture 3. Shear and Moment Equations and Diagrams. To design a beam, you should know the variation of the internal shear force ( V ) and bending moment ( M ) acting at each point along the axis of the beam.

marshat
Download Presentation

CE 201 - Statics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CE 201 - Statics Chapter 7 – Lecture 3

  2. Shear and Moment Equations and Diagrams • To design a beam, you should know the variation of the internal shear force ( V ) and bending moment ( M ) acting at each point along the axis of the beam. • The variation of ( V ) and ( M ) can be known by the method of sections discussed earlier. In these cases, sections are taken at arbitrary distance (X) from one end rather than at one specific point.

  3. Shear and Moment Functions Discontinuities • Change of distributed load • Concentrated load is applied • Couple moment is applied That is why sections must be taken between discontinuities.

  4. The normal force will not be considered because: • In most of the cases, loads are perpendicular to the beam • For design purposes, the beam's resistance to shear and bending is more important

  5. M M M M V V V V Sign Convention • Positive ( V ) is the one that causes clockwise rotation of the member. • Positive ( M ) is the one that causes compression or pushing on the upper part of the member.

  6. Procedure for Analysis • Determine the support reactive moments and forces by applying equilibrium equations on the entire beam. Resolve forces into their rectangular components • Determine shear and moment functions. • Specific sections are to be taken at discontinuities of loadings. • Apply Fy = 0 to get ( V ). • Apply M = 0 at the section end to get M. • Draw shear and moment Diagrams.

More Related