1 / 15

Material Application

Material Application . Materials are Mild Steel (4140) Aluminium (Grade). Contents . Introduction Analysis of Properties and Characteristics of Mild Steel (Grade) Analysis of Properties and Characteristics of Aluminium (Grade) Description of Characteristics and Properties

marlow
Download Presentation

Material Application

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Material Application Materials are Mild Steel (4140) Aluminium (Grade)

  2. Contents Introduction Analysis of Properties and Characteristics of Mild Steel (Grade) Analysis of Properties and Characteristics of Aluminium (Grade) Description of Characteristics and Properties Testing of Mild Steel and Aluminium • Welding Tests • Cutting Tests • Machinability Tests Conclusion Bibliography

  3. Introduction Materials application task I have chosen to analyse Mild Steel (grade) and aluminium(grade) to make my ______ out of. I will first look at the Chemical and Physical properties of each and then I will perform relevant test on each to test for suitability. These test will include welding, machining and cutting tests. In my conclusion I will indicate which material I have chosen and why.

  4. Analysis of Mild Steel (Grade ) Insert a Table of Physical Properties Fabrication Characteristics

  5. Analysis of Aluminium (grade) Insert a Table of Physical Properties Fabrication Characteristics

  6. Description I have conducted 3 test welding test MIG and Oxyacetylene, Cutting Test and a Machining test. The welding test is to see if it is possible to weld the material being tested with the equipment I have at school. The cutting test is to see how easily and accurately I can cut each material using the equipment I have at school. The machining test is to see how easily the material is to machine using the lathes we have at school.

  7. Testing The purpose of testing each material is to establish which material has the most desirable characteristics and properties for my (insert project title). Testing Procedure Oxyacetylene Welding Test – I will try fusion welding two sample pieces of the material together , record the results and comment on suitability. MIG Welding Test – I will try to MIG weld two sample pieces of the material together , record the results and comment on suitability. Cutting Test – I will use a hacksaw, power hacksaw, and friction cut off saw to cut a 20mm round bar of each material, time how long it takes to cut and the quality of the finish record my results and comment on suitability of cutting. Machining – I will use a sample of the material and turn a diameter , centre drill and drill a hole on the lathe. I will record my results and comment on suitability for machining.

  8. Oxyacetylene Welding Test

  9. MIG Welding Tests

  10. Cutting Tests

  11. Cutting Test

  12. Machining Test

  13. Machining Test

  14. Conclusion After comparing all the characteristics, properties and testing of both materials I believe that insert material name would be the best choice for my insert project name because ………. . I would not choose insert material name for my project because ……………

  15. Bibliography

More Related