1 / 10

Parts of the Machine

Parts of the Machine. Front of the machine. 3. 4. ½ Speed. Stitch Width Buttons. 5. Needle Position Buttons. 2. Needle Stop Up/Down. Stitch Length Button. 6. 1. Reverse Button. Front Right Side. 7. Memory Buttons. Alphabet Buttons. 8. Stitch Selection Buttons. 9. Lower Front.

marlin
Download Presentation

Parts of the Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Parts of the Machine

  2. Front of the machine 3 4 ½ Speed Stitch Width Buttons 5 Needle Position Buttons 2 Needle Stop Up/Down Stitch Length Button 6 1 Reverse Button

  3. Front Right Side 7 Memory Buttons Alphabet Buttons 8 Stitch Selection Buttons 9

  4. Lower Front 10 Bobbin Cover (bobbin case)

  5. Front Left Side Thread Take Up Lever Thread Take Up Cover 12 11

  6. Foot/Needle area 13 Thread Guide 15 Needle Clamp Needle Threader 14 Needle Guide Presser Foot 16 17 Lever to take off the Presser Foot Feed-Dogs 19 18 20 Stitch Plate

  7. Top of the Machine Left Side Bobbin Pre- Tension Rear Thread Guide 21 23 Thread Tension Slot Thread Tension Adjustment 24 22

  8. Top of the Machine Right Side Bobbin Winder On/Off Switch Horizontal Spool Pin 26 25

  9. Right Side of the Machine Power Switch 31 Handwheel 27 Power Plug Socket 32 Spool Pin 33 28 Balance Adjustment Knob Foot Control Socket Drop Feed-Dogs 29 30

  10. Backside of the Machine Presser Foot Lever 34 Thread Cutter 35 Carrying Handle 36

More Related