1 / 20

Capacitors Chapter 12

Capacitors Chapter 12. Definition. Capacitance – the ability of a component to store energy by accumulating charge A capacitor is a circuit component designed to store charge

malbona
Download Presentation

Capacitors Chapter 12

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CapacitorsChapter 12 EGR 101

  2. Definition • Capacitance – the ability of a component to store energy by accumulating charge • A capacitor is a circuit component designed to store charge • Practical applications with capacitors:Camera flash – Charges up and then quickly dischargesPower storage – Solar collectors charge up capacitors so that energy can be used after dark EGR 101

  3. Capacitor Construction • 2 Plates • Separated by a Dielectric EGR 101

  4. Variable Capacitors • Interleaved-Plate Capacitors EGR 101

  5. Fixed Value Capacitors • Polarized Electrolytic Capacitors • Most electrolytic capacitors are polarized EGR 101

  6. Capacitance • Amount of charge that a capacitor can store per unit volt applied where C = the capacitance of the component, in Coulombs per Volt defined as Farad (F) [C] = [Q]/[V]=C/V = F. Q = the total charge stored by the component V = the voltage across the capacitor corresponding to the value of Q EGR 101

  7. Capacitance Examples C = C = C = EGR 101

  8. Unit of Measure – farad (F) = 1 coulomb per volt (C/V) • Typical ranges • Most capacitors fall in the picofarad (pF) to microfarad (F) range • Tolerance • Usually fairly poor • Variable capacitors used where exact values required EGR 101

  9. Capacitor Value Codes • Physically large capacitors usually have their values printed directly on the case • Smaller capacitors are generally labeled using a code: • 2-digit code: the number represents the value of the component in pF Example: 15 = 15 pF • 3-digit code: the code is interpreted like the first three digits of a resistor code Example: 473 = 47 x 103pF = 47 nF • The numbers 6 and 7 are not used as multiplier values • The numbers 8 and 9 are decoded as follows: 8 = 0.01 and 9 = 0.1 Example: 158 = 0.15 pF EGR 101

  10. A Physical Characteristics of Capacitors d where C = the capacity of the component, in farads (F) e = permittivity of the dielectric A = the area of either plate, in square meters (m2) d = the distance between the plates, in meters (m) What are the units of e ? EGR 101

  11. Comparison to Resistance • For resistance, R = rL/A • For capacitance, C = eA/d • As r increases, R increases; as e increases, C increases • As L increases, R increases; as d increases, C decreases • As A increases, R decreases; as A increases, C increases EGR 101

  12. Permittivity • Permittivity of a capacitor dielectric is  = o x r - Permittivity of a vacuum: eo = 8.85x10-12 F/m MULTIPLIED BY - The relative permittivity of the material r e.g.: Materialerair 1paper 2.5mica 5glass 7.5 EGR 101

  13. Team Activity 1 • If you have a capacitor with the following parameters, what is its capacitance? • Plate cross-sectional area = 1cm2Dielectric material = airdistance between plates = 2cm • What happens to the capacitance if you change the dielectric to oil and the distance between plates to 1cm? • For the original dielectric material and plate distance, what would the cross-sectional area need to be to create a 1 F capacitor? EGR 101

  14. Series Capacitors Where CT = the total series capacitance Cn = the highest-numbered capacitor in the circuit EGR 101

  15. Team Activity 2Determine the total capacitance EGR 101

  16. Parallel Capacitors A1 A2 where Cn = the highest-numbered capacitor in the parallel circuit EGR 101

  17. Team Activity3Determine the total capacitance EGR 101

  18. Demonstration http://www.howstuffworks.com/framed.htm?parent=capacitor.htm&url=http://micro.magnet.fsu.edu/electromag/java/capacitor/ EGR 101

  19. Relationship between Capacitor Voltage and Current Capacitor Current vc _ i + where i = the instantaneous value of capacitor current C = the capacity, in farads = the instantaneous rate of change in capacitor voltage EGR 101

  20. Team Activity 4 • If the voltage across a 2F capacitor is what is the current through the capacitor? EGR 101

More Related