1 / 12

Welcome To The Greenery Enhancements Breakout

Product. Welcome To The Greenery Enhancements Breakout. Deco Mesh. 1. Make A Loop Of The Raw Edges. 2. Push Loop Into Wreath Between 2 Tips and Twist To Secure. 3. Move Hands About 18” Down The Mesh And Walk Mesh Into Middle. 4. Gather In Center. 5. Push Forward To Form A Poof.

maja
Download Presentation

Welcome To The Greenery Enhancements Breakout

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Product Welcome To The Greenery Enhancements Breakout

  2. Deco Mesh

  3. 1. Make A Loop Of The Raw Edges 2. Push Loop Into Wreath Between 2 Tips and Twist To Secure 3. Move Hands About 18” Down The Mesh And Walk Mesh Into Middle 4. Gather In Center 5. Push Forward To Form A Poof 6. Twist Between 2 Tips To Secure Mesh Complete Entire Wreath 8. Place On Top Of Original Starting Point Use Original 2 Tips and Twist Around Mesh 9. Follow Poof and Use 2 Tips and Twist 7. Take 4” and 2.5” Mesh and Gather in Loop

  4. Your Completed Wreath

  5. Picks

  6. 1. With Bow On Wreath Align Your Pick At An Angle With Top Of Pick Facing Out Of The Edge Of The Wreath 2. Secure Pick By Using 2 Tips and Twisting Them Around The Spine Of The Pick 3. Secure Pick In 2 To 3 Places (Top, Middle And Bottom) 4. Bottom Of Wreath Take Pick And Bend To Make ½ Moon Shape 5. Place 2 Half Moon Shaped Picks Hand Width Apart At Bottom Of Wreath And Secure

  7. Your Completed Wreath

  8. C9 Enhancement

  9. 1. Decide On Color Scheme. Make Sure That Like Colors Are Not Next To Each Other 2. You Will Place Bulb From Back Of Wreath To Hide Wires 3. You Will Use A Random Pattern: 1st Bulb Is Placed Outside Edge Of Inner Ring, 2nd Bulb Placed Outside Edge Of Outside Ring, 3rd Bulb Placed Off Center In Center Of Wreath 4. When Placing Bulb In Wreath Use Clip On Socket To Secure To Tip 5. The Wrap Tip Around Cord For More Security 6. When Wreath Is Complete Cut Stringer 7. Place Blackout Cap Over Exposed Wire And Use Black Electrical Tape To Secure In Place

  10. Your Completed Wreath

  11. Spine Light 1. Lay Garland Face Down. Lay Spine Of Light To Spine Of Garland 2. Take Longest Light And Wrap To End Of Tip 3. Give Tip A Twist To Secure Light To Tip 4. Continue To Medium Length Light And Repeat Steps 2 And 3 5. Take Shortest Light Length And Repeat Steps 2 And 3 7. Repeat Steps 2 And 3 Until Garland Is Completely Lit

  12. Pricing

More Related