1 / 6

SPIDER beam test

SPIDER beam test. Goals Beam test plan Beam test DAQ Effort/Cost estimate per beam test Key milestones. Goals. Performance of a tracking sensor measured in: Spatial resolution Efficiency Purity Charge division and collection For this need high energy beam test

maik
Download Presentation

SPIDER beam test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SPIDER beam test • Goals • Beam test plan • Beam test DAQ • Effort/Cost estimate per beam test • Key milestones Jaap Velthuis, University of Bristol

  2. Goals • Performance of a tracking sensor measured in: • Spatial resolution • Efficiency • Purity • Charge division and collection • For this need high energy beam test • Available at CERN or Fermilab • Performance of a calorimeter measured in energy resolution, but for TPAC need to study as well: • Efficiency per pixel • Dead areas • Signal size for MIP • Charge diffusion • Pixel-pixel variations • For energy resolution need variable energy (<50GeV e-), but for other interesting variables need high energy Jaap Velthuis, University of Bristol

  3. Beam Test Plan • Two beam tests are foreseen: • September 2010 • JESSICA1, ISIS2, TPAC2.0 • March 2012 • JESSICA2, ISIS3, TPAC2.1 • Programme: • At CERN starting with week time in PS. • Debugging JESSICA+ISIS2 using low E for TPAC2.1 stack in first week • Second and third week high E beam (can be e-, μ, ). Vary E • First week 60 GeV e-, second week 180 GeV  • Also TPAC sensor standalone (making a signal map) Jaap Velthuis, University of Bristol

  4. Beam Test DAQ • For the precise tracking we rely on the EUDET telescope: • <100μm thick Si • ~2×2cm2 sensors • <2.5 μm single hit resolution • Available at CERN and DESY • All sensors are running freely in “OR” mode • EUDET TLU gives triggers with time stamp (50MHz clock) • No problem for TPAC when using new EUDET C&C • Use remote shifts, only 4-5 experts needed on site Jaap Velthuis, University of Bristol

  5. Effort/Cost estimate per beam test • Preparation (excl making sensor DAQ) • Interfacing with EUDET TLU/C&C 2 months • Setting up complete DAQ chain 1 months • Data taking • 5 experts on site 5 months • Analysis • 6 months per sensor 18 months • Other: • Transport of equipment £ 4k • Travel costs per person (based EUDET money) £ 10k (for group) • Cryostat for ISISx 2 weeks • Some extra soldering etc 2 weeks Jaap Velthuis, University of Bristol

  6. Key milestones • 3 papers per beam test • … Jaap Velthuis, University of Bristol

More Related