1 / 34

Variable Geometry Camshaft

Sponsor: Gary Griffiths. Variable Geometry Camshaft. Scott Lake Matt Phillips Zachary Lightner Ryan Kowalewski Matt Griffey. Outline. Background of Invention Jaguar XJ6 Series 2 Engine CAD Model Development Dynamic Analysis. Background. A standard cam has a single profile

maida
Download Presentation

Variable Geometry Camshaft

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sponsor: Gary Griffiths Variable Geometry Camshaft Scott Lake Matt Phillips Zachary Lightner Ryan Kowalewski Matt Griffey

  2. Outline • Background of Invention • Jaguar XJ6 Series 2 Engine • CAD Model Development • Dynamic Analysis

  3. Background • A standard cam has a single profile • Profile dictates valve lift and duration • Optimal performance at one particular engine speed • Optimal valve lift and duration vary throughout engine RPM range

  4. Engineering Requirements • Increased volumetric efficiency • 4:1 Gear ratio mechanism for transferring torque from the input gear to the camshaft • 180° of crankshaft rotation resulting in 90° of valve duration • 240° of crankshaft rotation resulting in 120° of valve duration • Fulcrum Rotation of no more than 24° • Translational movement of rocker tower

  5. Jaguar XJ6 Series 2 Engine

  6. Jaguar XJ6 Series 2 Engine Current Timing Chain

  7. VGC Components New Components • Baseplate • Tappet and tappet guide • Fulcrum and bushings • Camshaft

  8. Design Considerations – Base Plate

  9. Design Considerations – Gear Train

  10. Final Design

  11. Dynamic Analysis

  12. Dynamic Analysis Standard Spring Stiff Spring 2900 mm N 50,000 mm N

  13. Approach • Divide model into two portions at cam – rocker arm interface • Observe deformation and Von Mises stresses at two distinct times: • Impact position (Cam initially makes contact with rocker arm) • Maximum Load position (Maximum normal force between cam and rocker arm)

  14. Materials

  15. Mesh Statistics

  16. Loading Conditions Impact Load: Maximum Load:

  17. Cam Portion – Von Mises Stresses

  18. Cam Portion – Life Cycles

  19. Cam Portion – Safety Factor

  20. Rocker Arm Portion – Deformation

  21. Rocker Arm Portion – Impact Position

  22. Rocker Arm Portion – Life Cycles

  23. Rocker Arm Portion – Safety Factor

  24. Recommendation • Redesign of VGC system to be located outboard of tappet guide assembly • Reduce generated forces by reducing separation distance, cam inertia • Explore alternate 4:1 gear ratio designs • Component Refinement – Redesign of high-stress components

  25. Questions?

  26. Appendix

  27. Patent Figures

  28. Patent Figures

  29. Cam Contact

  30. Patent Figures

  31. Patent Figures

  32. Dynamic Analysis

  33. Rocker Arm Portion – Maximum Load

  34. Rocker Arm Portion – Maximum Load

More Related