slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
FCQ321 Series training April 200 8 PowerPoint Presentation
Download Presentation
FCQ321 Series training April 200 8

Loading in 2 Seconds...

play fullscreen
1 / 60

FCQ321 Series training April 200 8 - PowerPoint PPT Presentation


  • 69 Views
  • Uploaded on

FCQ321 Series training April 200 8. System Cooking Business Team. Contents. Agenda. General Specification Features and functions Specification Accessories Hardware Wiring diagram Schematic Parts Components Disassembly Trouble Shooting Trouble shooting flow Error message

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'FCQ321 Series training April 200 8' - mahon


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
slide1

FCQ321Series training

April 2008

System Cooking Business Team

slide2

Contents

Agenda

  • General Specification
    • Features and functions
    • Specification
    • Accessories
  • Hardware
    • Wiring diagram
    • Schematic
    • Parts Components
  • Disassembly
  • Trouble Shooting
    • Trouble shooting flow
    • Error message
    • Error Trouble shooting
  • Reference
slide3

General Specification

New Appearance Design

  • Family looking
  • Biggest Capacity
  • Self clean and Steam clean
  • Dial control
  • Different pot size Burner
slide4

Features & Accessories

Oven Features

★ WHAT’S INCLUDED WITH YOUR RANGE

slide5

Functions

Control Panel - Oven

slide14

Disassembly

COVER-BACK GUARD WIRE,

COVER-BACK MAIN WIRE

AND PCB-MAIN

1> Turn off the electrical supply going to the range.

2>Pull the range away from the wall so that you can access the rear panel.

3> Remove Cover-Back Main Wire and Cover-Back Guard Wire

4> Remove screws of PCB assembly and separate PCB assembly.

( When you check PCB, check the proper PCB in default mode and check main PCB.)

slide15

Disassembly

REGULATOR-ENERGY

1> Turn off the electrical supply going to the range.

2> Pull the range away from the wall so that you can access the rear panel.

3> Remove Cover-Back Guard Wire

4> Remove Regulator-Energy connectors which be replaced

slide16

Disassembly

REGULATOR-ENERGY

4> Pull out the Knob-Dial.

5> Remove 2 screws and replace Regulator-Energy.

slide17

Disassembly

HEATER-RADIANT

CERAMIC GLASS COOKTOP REMOVAL

1> Unplug the cord or disconnect power

2> Open oven door and remove the 3 screws located at the front of the cook-top, then close the door. 3 Screws

3> Slightly lift up and pull up the cook-top and then unplug the 2 connectors wire at the back by squeezing side tabs

and unscrew ground wire.

slide18

Disassembly

HEATER-RADIANT

4> Protect the cooktop surface and turn the assembly over.

5> To remove the surface elements

a) Remove the wires from the element and limiter terminals.

b) Remove the element bracket screw (shown below) for the element you are servicing.

c) Carefully lift the bottom of the bracket just far enough to remove the element.

d) Use sharp tool to remove the heating element

REASSEMBLY NOTE: When you reinstall the element make sure that the wires are inserted

into the correct tap then reinstall the bracket screw

to secure it to the cooktop.

slide19

Disassembly

LATCH-DOOR AND SWICH-DOOR PLUNGER

1> Turn off the electrical supply going to the range.

2> Open the oven door.

3> Raise the cooktop

4> Remove the cooktop To remove the door latch:

a) Remove two screws from the front of cavity.

b) Remove a screw from Cover-Back Guard and remove latch-door.

slide20

Disassembly

LATCH-DOOR AND SWICH-DOOR PLUNGER

slide21

Disassembly

HEATER-BROIL

slide22

Disassembly

HEATER-BAKE

slide23

Disassembly

Lamp

To replace bulb and bulb cover:

1> Disconnect power.

2> Remove oven door.

3> Turn the glass bulb cover in the back of the oven counterclockwise to remove.

4> Turn bulb counterclockwise to remove from socket.

5> Replace bulb and bulb cover by turning clockwise.

To replace socket assembly:

6> Disconnect the wires from the socket terminals.

7> Use a screwdriver and bend the clips on the socket away from the edges of the liner hole(there are 6 clips on th e socket),

and pull the socket out of the liner. Push the socket out from the back of the unit.

slide24

Disassembly

TEMPERATURE SENSOR

slide25

Disassembly

STORAGE DRAWER

slide26

Disassembly

OVEN DOOR

To remove the door:

1> Fully open the door.

2> Pull the hinge locks downward (Fig.1)

3> Firmly grasp both sides of the door at the top.

4> Close door to the door removal position, which is approximately 5 degrees. (refer to the Fig.2) Lift door up and out until

the hinge arm is clear.

slide27

Disassembly

OVEN DOOR

To replace the door:

1. Firmly grasp both sides of the door at the top position.

2. With the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the

hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot.

3. Fully open the door. If the door will not fully open, it means that the indentation is not seated correctly in the bottom edge of

the slot. Push the hinge locks up to the locked position.

4. Close the oven door.

slide28

Disassembly

HANDLE-DOOR

AND GLASS-INNER

1> Remove the oven door from the range.

2> Place the oven door on a padded work surface with the front glass facing down.

3> Remove 3 bottom screws from the door.

4> Remove 2 Handle-screws from the door.

5> Lift the door rear assembly off the front assembly and set it aside.

slide29

Disassembly

HANDLE-DOOR

AND GLASS-INNER

slide30

Disassembly

HANDLE-DOOR

AND GLASS-INNER

to

slide31

Disassembly

HANDLE-DOOR

AND GLASS-INNER

slide32

Disassembly

GASKET-DOOR

1> Open the oven door to its fully down position.

2> Pull the ends of the gasket out of the liner holes.

3> Pull the oven door gasket clips out of the holes until all of the clips are removed.

REASSEMBLY NOTE: When you install the new gasket, make sure that all of the clips are seated in their liner holes,

and that the ends of the gasket are pushed fully into their holes.

Use the pointed end of a pencil to push the gasket ends into the holes.

slide33

Disassembly

PANEL-SIDE

1> Turn off the electrical supply.

2> Remove the oven door from the range

3> Pull the range away from the wall so you can access the back of the unit.

4> Remove the 12 screws from the rear of Panel-Side and remove Cooktop.

5> Remove the (each) 3screws from the top the Panel-Side.

6> Pull the back of the side panel out from the range approximately 10˚(degree)

7> Push forward and remove Panel-Side.

slide34

Trouble Shooting

Parts Checking Method

slide35

Trouble Shooting

Parts Checking Method

slide36

Trouble Shooting

Parts Checking Method

slide37

Trouble Shooting

Parts Checking Method

slide38

Trouble Shooting

Parts Checking Method

slide39

Trouble Shooting

Parts Checking Method

slide42

Trouble Shooting

Cook-top No heating or Abnormal working

slide57

Reference

Checkpoints before service request

slide60

SAMSUNG

Thanks