Introduction to Proteus - PowerPoint PPT Presentation

slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
Introduction to Proteus PowerPoint Presentation
Download Presentation
Introduction to Proteus

play fullscreen
1 / 26
Introduction to Proteus
2107 Views
Download Presentation
mahlah
Download Presentation

Introduction to Proteus

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Introduction to Proteus Professor: Dr. A.H. Rezaee Prepared by: EhsanEsmaili

  2. In this presentation I have used proteus 7 professional

  3. Preface Proteusis one of the most famous simulators. It can be used to simulate almost every circuit on electrical fields. It is easy to use because of the GUI interface that is very similar to the real Prototype board. Moreover, it can be used to design Print Circuit Board (PCB).

  4. A Guide To ISIS Overview Window Editing Window Object Selector

  5. Tools and Buttons Selection Mode Component Mode Pick a Device Ground and terminals Signal generators(sources) Instruments(Scope, meters)

  6. Tools and Buttons Device rotation Stop the simulation Device flip Run a simulation

  7. How to pick a device? (1) Click on P to pick a device. (2) Type Resistor to search for (3) Double click on Resistor to select (4) Notice the Resistor in the Object Selector

  8. How to draw a Circuit? We draw a following simple circuit as our first circuit: GO

  9. An Analog circuit: The following is one of the circuits that I’ve designed for Electronic laboratory: GO

  10. It’s time to design a digital circuit! Getting acquitted with logic gates: AND Exclusive OR GO

  11. BUT what we see in laboratory is different! We don’t have in real world!!

  12. So our circuit in pervious slide in laboratorywill be: GO

  13. Another way to analyze digital circuits: Analyze by digital signal GO

  14. Full Adder (3-bit Adder) circuit : GO

  15. BCD to Seven-segment display: GO

  16. 4-bit Magnitude Comparator: GO

  17. BCD adder and display result on a 7segment: GO

  18. 3×8 Decoder: LED Matrix: GO

  19. Simulating big circuits in Proteus • It’s possible to simulate big circuits in Proteus with common methods that we learnt. • But the common methods are not suitable for big circuits. • we should use moreadvanced methods that I will explain to you. • The advanced methods make the circuit easier to understand and reduce possible errors.

  20. Subcircuit and Terminals • We should divide our big circuit to smaller parts called subcircuit. • It reduces possible errors and makes team working possible. • we should use terminals to make the circuits easier to understandby reducing the wiring.

  21. How to make a subcircuit?andHow to draw the circuit by terminals? GO

  22. References: • Digital Design 5th Edition by Morris Mano • Proteus Tutorial for Digital Circuit Design CPE221 Digital Circuit Laboratory • A Very Brief Introduction to ISIS Proteus CPE 110 Computer Exploration • Proteus Brochure (PDF) by Labcenter • Computer engineering department logic lab Instruction manual

  23. Acknowledgement Thanks to: • Dr. A.H. Rezaee for observing my presentation • SadeqCharmchi for his help

  24. The presentation files are available on my personal website: http://ele.aut.ac.ir/~ehsan/ Courses  Logic Circuits  Proteus

  25. Any Questions? Any Questions? The End