1 / 66

BC Timber Sales Environmental Management System (EMS) and Sustainable Forest Management (SFM)

BC Timber Sales Environmental Management System (EMS) and Sustainable Forest Management (SFM). Awareness Training for BCTS Staff Updated: April, 2012. Acronyms used in this training. BCTS = BC Timber Sales BA = Business Area, i.e.: local BCTS office LPC = Licencee, Permittee or Contractor

lucky
Download Presentation

BC Timber Sales Environmental Management System (EMS) and Sustainable Forest Management (SFM)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. BC Timber SalesEnvironmental Management System (EMS) and Sustainable Forest Management (SFM) Awareness Training for BCTS Staff Updated: April, 2012

  2. Acronyms used in this training BCTS = BC Timber Sales BA = Business Area, i.e.: local BCTS office LPC = Licencee, Permittee or Contractor LWCP = Licencee With Cutting Permit EMS = Environmental Management System EOP = Environmental Operating Procedure EFP = Environmental Field Procedure eERP = Environmental Emergency Response Plan SFMP = Sustainable Forest Management Plan April 2012 - Version 3.2

  3. Section #1: EMS Overview • The scope of the EMS • ISO 14001 • System overview April 2012 - Version 3.2

  4. EMS Review Scope of the BCTS EMS • Defining the scope The activities where the EMS is applied and implemented by BCTS staff and LPCs • Defining the activities • Planning (i.e. assessments, layout, cruising, etc) • Harvesting (i.e. falling, yarding, processing, loading, etc.) • Roads (i.e. subgrade construction, surfacing, culverts, etc.) • Silviculture (i.e. site prep, planting, surveys, etc.) • Defining the locations • All areas covered under a BCTS license, permit or contract • Not LPC camps (except when covered under contracts, i.e. planting camps), shops or off-site facilities April 2012 - Version 3.2

  5. EMS ReviewWhy Do We Need an EMS? • To protect the environment (through a systematic process) • To promote environmental Due Diligence (through training, monitoring, & follow up) • To allow an outside, 3rd party auditor to verify our claims that BCTS protects the environment • To have an efficient system for improving our business April 2012 - Version 3.2

  6. EMS ReviewWhy Do We Need an EMS? • Due Diligence defense considers if the following are in place: • Preventative system (e.g. EMS) • Training programs • Internal / external audits • Risk assessments • Contingency plans designed to prevent events • BC Timber Sales EMS offers all of these elements April 2012 - Version 3.2

  7. EMS Review What is our EMS? • Defines the environmental performance we plan to achieve • Describes who will do what, whento achieve it • Clear roles and responsibilities at all levels of BCTS and for our LPCs • Always evaluating and improving the system and our performance April 2012 - Version 3.2

  8. EMS Review What is ISO 14001? • A standard (ISO 14001: 2004) that defines the necessary elements of an effective environmental management system • Recognized internationally • Implementation in Canada overseen by the Standards Council of Canada April 2012 - Version 3.2

  9. EMS ReviewWhat does ISO Certification mean? • The BCTS EMS meets the ISO 14001 standard and • Independent auditors confirm that BCTS is following the practices and procedures that are outlined in the EMS April 2012 - Version 3.2

  10. EMS Review ISO 14001 Certification Does Not: • Verify the sustainability of our forest management practices • Verify that our products come from certified forests • Allow us to use a certification stamp on our products April 2012 - Version 3.2

  11. Continual Improvement Performance Reporting Management Review EFPs Checklist EOPs Supplements Emergency Response Plan Obj. & Targets Env. Aspects Policy Tables EMS Manual EMS Review The System April 2012 - Version 3.2

  12. Section #2: The EMS Cycle • PLAN – Policy, Environmental Aspects • DO – Operational controls, training • CHECK – Monitoring, Inspection, Audits • RESPOND – Incident and Action Plan Tracking April 2012 - Version 3.2

  13. EMS Review Plan-Do-Check-Respond • The EMS is based on a “continual improvement” loop: Plan Do Check etc… Respond April 2012 - Version 3.2

  14. EMS Review 1. The PLAN • EMS Policy • States the guiding principles of our EMS • Commits to: • Meeting all laws and other requirements to which we subscribe • Strive for excellence in forest management, continually improving • Preventing pollution • Monitoring and evaluating key BCTS forestry operations • Communicating to staff and the public April 2012 - Version 3.2

  15. EMS Review 1. The PLAN • Environmental Aspects “An element of an organization’s activities that can interact with the environment” Significant environmental aspects have a higher risk of negatively impacting natural resources and the environment Examples can include: • Fuel Handling (refueling, servicing, storage, transport) Spillage of: Chemical products • Construction/rehabilitation of trails within harvest areas (Backspar and hoe forwarding, etc.) April 2012 - Version 3.2

  16. EMS Review 2. DO • Implement “Operational Controls” to manage significant environmental aspects • Environmental Field Procedures (EFPs) • Environmental Operating Procedures(EOPs) • Preworks for all LPCs • Monitoring and inspecting of activities • Environmental emergency response plans • Must know the requirements for the tasks you are doing April 2012 - Version 3.2

  17. Checklists: CHK-001 Consulting Services Pre-work CHK-002 Access Pre-work CHK-003 Harvesting Pre-work CHK-004 Silviculture Pre-work CHK-005 Consulting Services Inspection CHK-006 Access Inspection CHK-007 Harvesting Inspection CHK-008 Silviculture Inspection CHK-009 Incident Report CHK-010 Test-Drill Report CHK-011 LPC Self-Inspection Report EFPs (LPCs and BCTS staff) 1 - General 2 - Project Supervision 3 – Development and Planning 4 – Roads, Bridges, and Culverts 5 - Harvesting 6 – Fuel Handling 7 – Dryland Sort 8 – Marine Log Handling Facilities EOPs (BCTS staff & LWCP) 1 – Planning 2 – LP Operations 3 - BCTS Projects 4 - LWCP Planning 5 - LWCP Operations 6 - Incident Reports EMS Review2. DO April 2012 - Version 3.2

  18. EMS Review2. DO • Must be trained for the tasks you are doing • Training requirements are identified in the Training Matrix provided at the BCTS Prework April 2012 - Version 3.2

  19. EMS Review3. CHECK April 2012 - Version 3.2

  20. EMS Review3. CHECK April 2012 - Version 3.2

  21. EMS ReviewChecking the Progress • The BCTS staff approach • Monitoring • Informal visits to the worksite to focus on key risk issues • May or may not be documented using BCTS checklists. • Inspections • Formal visits to conduct thorough worksite assessments • Purpose: to identify deficiencies and trends, to collect data • Frequency: as determined by the Risk Ranking • Primary benefits of Inspections – identifying deficiencies and trends, initiating corrective action, ensuring follow up April 2012 - Version 3.2

  22. EMS Review Checking the Progress • The LPC Approach • Supervising (similar to monitoring by BCTS) • Continual on-site checking of work progress, conformance to operational and EMS requirements • May be documented in diaries or on forms • Inspections • Formal worksite assessments by the field supervisor • Purpose: to identify deficiencies and trends within the workplace • Frequency: as determined at the BCTS Prework • Type of Inspections • Operational and EMS April 2012 - Version 3.2

  23. EMS Review Required Records for LPC • Prework Records • Indicating points of discussion • Date • Inspection Records • Verify worksite requirements • Date and name of Inspector • Training Records • Names of workers • Type and date of training • Incident Records • Spills over 25 liters, Fires, Erosion events, Non-compliances • At least the Incident details must be completed • Test/Drill Records • Environmental Emergency Response Plan April 2012 - Version 3.2

  24. EMS Review4. RESPOND • Action Plans are written during inspections – who is to do what, by when • EMS modifications / improvements will be assigned as Action Plans or in annual reviews • Issues will be investigated and Action Plans assigned to address root causes • All actions will be assigned, tracked & followed up April 2012 - Version 3.2

  25. EMS Review Respond – Corrective Action • The BCTS Approach • If deficiencies or trends are noted during monitoring visits or formal inspections, corrective action will be initiated through: • Documentation on the Inspection Forms • Documentation on the Incident Report Forms • Documentation on Notices to Comply • Issue Tracking System entries (ITS) • If deficiencies or trends are noted during Audits, corrective action will be initiated through Audit Action Plans April 2012 - Version 3.2

  26. EMS Review Respond – Corrective Action • The LPC Approach • Deficiencies or trends noted during routine supervision or formal inspections should be followed up ASAP with corrective action • Immediate Action (i.e. cleaning up the spill) • Preventative Action (i.e. further training or change to work procedures) • If noted during inspections, corrective action should be noted on form along with the date when corrected April 2012 - Version 3.2

  27. Section #3: Document Detail • EMS Manual • Environmental Emergency Response Plan (eERP) • Environmental Operating Procedures • Checklists • Environmental Field Procedures April 2012 - Version 3.2

  28. EMS Document DetailEMS Manual • Consistent with ISO 14001 elements, from Policy to Management Review • Describes EMS roles and responsibilities • For BCTS staff and LPCs: • Be trained in and follow relevant procedures (EOPs, EFPs, eERPs, etc.) • Communicate requirements, communicate problems April 2012 - Version 3.2

  29. EMS Document DetailEMS Manual – Chapter 1-6 April 2012 - Version 3.2

  30. EMS Document DetailEMS Manual – Chapter 7-11 April 2012 - Version 3.2

  31. EMS Document DetailEMS Manual – Chapter 12 - 18 April 2012 - Version 3.2

  32. EMS Document DetailEnvironmental Emergency Response Plan (eERP) • Addresses 3 types of environmental emergency: • Fire, spill, landslide / major erosion event • Provides: • Preparedness information • Response procedures • Contact information • Complete eERP to be maintained on site • On-site supervisors and all workers must know eERP location and be familiar with their roles and responsibilities April 2012 - Version 3.2

  33. EMS Document DetailEnvironmental Emergency Response Plan (eERP) • Contains names and phone numbers of key personnel • Contains emergency phone numbers of key agencies (PEP, Fire Reporting Centre, etc) • Contains spill response steps for Fire, Spills, and Erosion events • Contains locations of spill and fire equipment • Contains names of trained personnel (Note: # of on-site personnel trained to the S-100 standard will be determined at the BCTS Prework in accordance with the Wildfire Act and Regulation) • Contains test or drill requirements April 2012 - Version 3.2

  34. EMS Document DetailEnvironmental Operating Procedures Purpose: Define tasks & responsibilities for BCTS operations April 2012 - Version 3.2

  35. EMS Document DetailChecklist Forms Purpose: Checking, Responding, & Data collection April 2012 - Version 3.2

  36. EMS Document DetailChecklist Forms Purpose: Checking, Responding, & Data collection April 2012 - Version 3.2

  37. EMS Document DetailPrework Forms (CHK 001-004) • Used by BCTS staff during Preworks with Licensees or Contractors and may be used by a LPC if they have no other documentation method • Significant issues captured at Preworks • Operational requirements (Project Plans) • Legislative & Regulatory requirements • Contractual or License, Safety and SFM requirements • EMS requirements i.e. Emergency Response, Fuel Management • On-site supervisors, all LPC staff and sub-contractors must have a documented prework before starting work • Primary benefits of Pre-works – outlines the expectations for site-specific environmental management to the recipient prior to commencement of work • Note: Guidance Documents are available to assist in completing BCTS Pre-work Forms April 2012 - Version 3.2

  38. EMS Document DetailInspection Forms (CHK 005-008) • Used by BCTS staff and can be used by LPC if no other documentation method exists • Significant Issues captured during inspections: • Conformance and compliance to contractual and legal documents, Safety and SFM requirements • Conformance to operational plans i.e. Site Plans, Road Plans and Profiles • Conformance to EMS requirements i.e. Proof of training, Emergency Preparedness and Response, Fuel Management • Note: Guidance Documents are available to assist in completing BCTS Inspection Forms April 2012 - Version 3.2

  39. EMS Document DetailIncident Report Form (CHK 009) • To be used by LPC and BCTS staff to report EMS/SFM incidents and initiate investigations • When Incident Reports are required: • Spills of BCTS reportable size or greater to land, or any amount spilled to water • Fires (Natural, man-caused, or industrial) • Erosion events or landslides • Potential non-compliance • Significant non-conformance (BCTS staff) • Information captured during Incident reporting and investigations • Description of the Incident (scene details) • Determination of preliminary and root causes • Recommendations and Corrective Action to mitigate future events April 2012 - Version 3.2

  40. EMS Document DetailTest-Drill Report Form(CHK 010) • To be used by LPC to record details of tests or drills conducted for environmental emergency response • Requirement and frequency of tests or drills are outlined at BCTS Preworks • Information captured during Test-Drill reports • Type of test or drill (Fire, Spill, Erosion) • Description of the test or drill • Description of the deficiencies during the event • Recommendations for improvement April 2012 - Version 3.2

  41. EMS Document DetailBCTS Client Self Inspection Report (CHK 011) • Simplified checklist for BCTS clients covering essential elements of EMS • Includes section for corrective actions • Information captured during self-inspections • Completion of training • Pre-work completion and documentation • Plan requirements • Documents and records • Environmental protection • Reporting of issues, action items, improvements to project plan April 2012 - Version 3.2

  42. EMS Document DetailEnvironmental Field Procedures Purpose: Procedures to minimize environmental impacts April 2012 - Version 3.2

  43. EMS Document DetailEFP 01 - General • General procedures provided to all workers and designed to minimize impacts while conducting License or contract operations for BCTS • Key Highlights • Prework awareness • Project Plan awareness • Monitoring the work • Site maintenance & Emergency Preparedness • Stop Work criteria April 2012 - Version 3.2

  44. EMS Document DetailEFP 02 – Project Supervision • General procedures provided for all field supervisors and designed to minimize impacts by providing clear responsibilities for those who oversee workers during License/Contract operations • Key Highlights • Prework components and documentation • Supervisory responsibilities & Stop Work criteria • Monitoring and Inspections • Documentation management • Emergency Reporting procedures April 2012 - Version 3.2

  45. EMS Document DetailEFP 03 – Development & Planning • General procedures provided to all workers performing operational planning activities and designed to minimize impacts in the field • Key Highlights • Project Plan preparation • Field work requirements • Data integration into layout & design work • Stop Work criteria April 2012 - Version 3.2

  46. EMS Document DetailEFP 04 – Roads, Bridges, & Culverts • General procedures provided to workers performing construction, maintenance, inspection and deactivation activities and designed to minimize impacts in the field • Key Highlights • Road & Bridge inspection criteria • Construction, maintenance, deactivation procedures • Bridge & Major Culvert installation, maintenance, and removal precautions and criteria • Disposal procedures • Stop Work criteria April 2012 - Version 3.2

  47. EMS Document DetailEFP 05 - Harvesting • General procedures provided to workers performing harvesting activities and designed to minimize impacts in the field • Key Highlights • Procedures and criteria for: • Falling • Yarding, Skidding and Forwarding • Loading, processing, and hauling • Stop Work criteria April 2012 - Version 3.2

  48. EMS Document DetailEFP 06 – Fuel Handling • General procedures provided to all workers involved in handling, storing, and transporting of fuel during regular activities and designed to minimize the potential of pollution • Key Highlights • Fuel Storage and Handling • Refueling requirements • Spill response references • Stop work criteria April 2012 - Version 3.2

  49. EMS Document DetailEFP 07 – Dryland Sort & Log Loading • General procedures provided to workers performing sort yard activities and designed to minimize impacts to sensitive areas and watercourses or water bodies • Key Highlights • Sort yard operational requirements • Stockpiling & disposal of waste • Stop Work criteria April 2012 - Version 3.2

  50. EMS Document DetailEFP 08 – Marine Log Handling Facilities • Procedures provided to workers performing construction, maintenance and operations of log dumps, helicopter water drop zones and direct barge-loading facilities • Key Highlights • General, construction and operations requirements • Stop Work criteria April 2012 - Version 3.2

More Related