1 / 4

Heat Exchanger

LNT Industrial Engineering Services came into existence in the year 1989. We are recognized for Manufacturing and Exporting of Demister Pads, Strainers, Filters, Valves, Separators, Level Gauges, Agitators, etc,. Our company, sources the best quality Raw Materials and Inputs for crafting the provided products in compliance with the Industry set guidelines. Their rich features make these products highly appreciated among our customers. Since the inception of our firm, we have been supported by a crew of very talented professionals.

Download Presentation

Heat Exchanger

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Manufacturer and Supplier by LNT Industrial Engineering Services Contact Person: RiteshTolia

  2. Heat Exchangers Our product range includes a wide range of Heat Exchangers and Oil Coolers. A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.

  3. How to make a heat exchanger more efficient Temperature differential - As discussed in point 3 (temperature cross-over) the difference between the hot fluid and coolant is very important when designing a heat exchanger. The coolant always needs to be at a lower temperature than the hot fluid. Lower coolant temperatures will take more heat out of the hot fluid than warmer coolant temperatures. If you had a glass of drinking water at room temperature for example, it is much more effective to cool it down using ice rather than just cool water, the same principle applies to heat exchangers. Flow rate - Another important factor is the flows of the fluids in both the primary and the secondary side of the heat exchanger. A greater flow rate will increase the capability of the exchanger to transfer the heat, but a greater flow rate also means greater mass, which can make it more difficult for the energy to be removed as well as increasing velocity and pressure loss. Installation - The heat exchanger should always be installed based on a manufacturers' guidelines. Generally speaking the most efficient way to install a heat exchanger is with the fluids flowing in a counter-current arrangement (so if the coolant is travelling left to right, the hot fluid travels right to left) and for shell and tube heat exchangers the coolant should enter at the lowest inlet position to ensure that the heat exchanger is always full of water. For air cooled heat exchangers it is important to consider the air flow when installing a cooler, any part of the core which is blocked will compromise cooling capacity.

  4. For More Details: Contact Person: RiteshTolia Website: https://www.lntindustries.in Phone: +91 9822210965 Email: info@lntindustries.in

More Related