1 / 24

Communication is the transfer of information from one place to another. This should be done

Overview. Communication is the transfer of information from one place to another. This should be done - as efficiently as possible - with as much fidelity/reliability as possible - as securely as possible

lisaf
Download Presentation

Communication is the transfer of information from one place to another. This should be done

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Overview Communication is the transfer of information from one place to another. This should be done - as efficiently as possible - with as much fidelity/reliability as possible - as securely as possible Communication System: Components/subsystems act together to accomplish information transfer/exchange.

  2. Elements of a Communication System Input message Output message Input Transducer Output Transducer Transmitter Channel Receiver

  3. Input Transducer: The message produced by a source must be convertedby a transducer to a form suitable for the particular type of communication system. Example: In electrical communications, speech waves are converted by a microphone to voltage variation. Transmitter: The transmitter processes the input signal to produce a signal suits to the characteristics of the transmission channel. Signal processing for transmission almost always involves modulation and may also include coding. In addition to modulation, other functions performed by the transmitter are amplification, filtering and coupling the modulated signal to the channel.

  4. Channel:The channel can have different forms: The atmosphere (or free space), coaxial cable, fiber optic, waveguide, etc. The signal undergoes some amount of degradation from noise, interference and distortion Receiver: The receiver’s function is to extract the desired signal from the received signal at the channel output and to convert it to a form suitable for the output transducer. Other functions performed by the receiver: amplification (the received signal may be extremely weak), demodulation and filtering. Output Transducer: Converts the electric signal at its input into the form desired by the system user. Example: Loudspeaker, personal computer (PC), tape recorders.

  5. To be transmitted, Information (Data) must be transformed to electromagnetic signals.

  6. Electromagnetic Waves .

  7. Electromagnetic Waves .

  8. Electromagnetic Spectrum http://www.edumedia-sciences.com/a185_l2-transverse-electromagnetic-wave.html

  9. Electromagnetic Spectrum

  10. Communication systems • The block diagram on the top shows the blocks common to all communication systems Digital Analog

  11. Remember the components of a communications system: • Input transducer: The device that converts a physical signal from source to an electrical, mechanical or electromagnetic signal more suitable for communicating • Transmitter: The device that sends the transduced signal • Transmission channel: The physical medium on which the signal is carried • Receiver: The device that recovers the transmitted signal from the channel • Output transducer: The device that converts the received signal back into a useful quantity

  12. Analog Modulation • The purpose of a communication system is to transmit information signals (baseband signals) through a communication channel • The term baseband is used to designate the band of frequencies representing the original signal as delivered by the input transducer • For example, the voice signal from a microphone is a baseband signal, and contains frequencies in the range of 0-3000 Hz • The “hello” wave is a baseband signal:

  13. Since this baseband signal must be transmitted through a communication channel such as air using electromagnetic waves, an appropriate procedure is needed to shift the range of baseband frequencies to other frequency ranges suitable for transmission, and a corresponding shift back to the original frequency range after reception. This is called the process of modulation and demodulation • Remember the radio spectrum: • For example, an AM radio system transmits electromagnetic waves with frequencies of around a few hundred kHz (MF band) • The FM radio system must operate with frequencies in the range of 88-108 MHz (VHF band) AM radio FM radio/TV

  14. Basic analog communications system Baseband signal (electrical signal) EM waves (modulated signal) Transmitter Input transducer Transmission Channel Modulator EM waves (modulated signal) Carrier Baseband signal (electrical signal) Receiver Output transducer Demodulator

  15. Types of Analog Modulation • Amplitude Modulation (AM) • Amplitude modulation is the process of varying the amplitude of a carrier wave in proportion to the amplitude of a baseband signal. The frequency of the carrier remains constant • Frequency Modulation (FM) • Frequency modulation is the process of varying the frequency of a carrier wave in proportion to the amplitude of a baseband signal. The amplitude of the carrier remains constant • Phase Modulation (PM) • Another form of analog modulation technique which we will not discuss

  16. Amplitude Modulation Carrier wave Baseband signal Modulated wave Amplitude varying-frequency constant

  17. Frequency Modulation Carrier wave Large amplitude: high frequency Baseband signal Small amplitude: low frequency Modulated wave Frequency varying-amplitude constant

  18. Example Amplitude modulation

  19. Figure AM band allocation

  20. Figure Frequency modulation

  21. Figure FM band allocation

  22. Figure Phase modulation

  23. AM vs. FM • AM requires a simple circuit, and is very easy to generate. • It is simple to tune, and is used in almost all short wave broadcasting. • The area of coverage of AM is greater than FM (longer wavelengths (lower frequencies) are utilized-remember property of HF waves?) • However, it is quite inefficient, and is susceptible to static and other forms of electrical noise. • The main advantage of FM is its audio quality and immunity to noise. Most forms of static and electrical noise are naturally AM, and an FM receiver will not respond to AM signals. • The audio quality of a FM signal increases as the frequency deviation increases (deviation from the center frequency), which is why FM broadcast stations use such large deviation. • The main disadvantage of FM is the larger bandwidth it requires

More Related