1 / 47

How to detect the virtually undetectable in the atmosphere.

How to detect the virtually undetectable in the atmosphere. Prof. Dudley Shallcross School of Chemistry. 3 most abundant gases in each planetary atmosphere Jupiter H 2 (93%) He (7%) CH 4 (0.3 %) Saturn H 2 (96%) He (3%) CH 4 (0.45 %) Uranus H 2 (82%) He (15%) CH 4 (2.3 %)

liliha
Download Presentation

How to detect the virtually undetectable in the atmosphere.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to detect the virtually undetectable in the atmosphere. Prof. Dudley Shallcross School of Chemistry

  2. 3 most abundant gases in each planetary atmosphere Jupiter H2 (93%) He (7%) CH4 (0.3 %) Saturn H2 (96%) He (3%) CH4 (0.45 %) Uranus H2 (82%) He (15%) CH4 (2.3 %) Neptune H2 (80%) He (19%) CH4 (1-2 %) VenusCO2 (96%) N2 (3.5%) SO2 (0.015 %) Mars CO2 (95%) N2 (2.7%) Ar (1.6 %) Earth N2 (78%) O2 (21%) Ar (0.93 %)

  3. 0.9% of mass 9% of mass 90% of mass

  4. The ozone layer (stratosphere 10-50 km)

  5. UV-A O O O O O O O O O O UV-B

  6. The Chapman Mechanism In the 1930s Sidney Chapman devised a mechanism that accounted for the ozone layer and the temperature structure. O2 + h  O + O O + O2 + M O3 + M O3 + hO2 + O O3 + O  2O2

  7. The Chapman Mechanism In the 1930s Sidney Chapman devised a mechanism that accounted for the ozone layer and the temperature structure. O2 + h  O + O O + O2 + M O3 + M O3 + hO2 + O Very exothermic releases a lot of energy into the atmosphere O3 + O  2O2

  8. Challenge: ozone • 1930s suspected ozone was important • 10-50 km above our heads • Present in ppm (parts per million level) • In situ measurements or remote sensing

  9. Ozonesondes (in situ) Electrochemical concentration cell (ECC), ozone reacts with a dilute solution of potassium iodide and causes a change in electrical signal which is converted to a concentration. Data (pressure, humidity and temperature and ozone) telemetered back to the surface receiving station. Measures up to about 35 km, higher at the equator

  10. British Antarctic Survey data • Ozonesonde data since 1950s, every day a sonde is launched • Started to observe a decline in ozone over the South Pole in austral spring • Paper published by Farman et al. in 1985 (25 year anniversary in 2010) showing ‘ozone hole’

  11. British Antarctic Survey data • In spring at certain altitudes, ozone disappears totally. • Chlorofluorocarbons (CFCs), fully halogenated hydrocarbons, e.g. CF2Cl2, were shown to be the source of Cl that was responsible in the main for the loss.

  12. Satellite observations • UV backscatter technique (more about this in a minute) to measure ozone remotely • Showed ozone hole …

  13. Backscatter u.v. UV (blue) and visible (green) radiation from the Sun passes through the Earth’s atmosphere and the UV is absorbed by ozone. Some of the light is reflected (scattered) back to space by clouds etc. The satellite observes the backscattered light and compares with the direct beam from the Sun. Satellite

  14. Other geometries are also used Satellite

  15. Basic absorption spectroscopy

  16. Regions of the spectrum used for remote sensing

  17. Remote sensing • Now satellites can observe numerous species by their characteristic absorption spectrum • Potential global coverage • Still limitations with respect to altitude – clouds and water vapour interfere with retrievals and so it is often restricted to the stratosphere and above, though some data for the upper troposphere is possible

  18. Troposphere 10 km The Tropopause The Boundary Layer 1 km NO, NO2, VOC VOCs ? 0 km Compounds of both biogenic and anthropogenic origin

  19. Troposphere - issues • Lots of species • Particles • Clouds, aerosol, mists etc. • Air quality • Climate (e.g. CO2)

  20. CO2 by infra red spectroscopy High concentration easy to observe CO2 by absorption spectroscopy

  21. Limitations of absorption spectroscopy

  22. Long path-length absorption spectroscopy

  23. Long path-lengths intra-cavity absorption

  24. Cavity ring down spectroscopy - CRDS

  25. CRDS sensor

  26. Troposphere - issues • Spectroscopy suffers from the fact that many species are present that absorb in the same part of the spectrum, e.g. all hydrocarbons contain a C-H bond. If we could separate out the species we could measure them individually. • Gas chromatography coupled with a suitable detector will allow species to be measured

  27. Gas chromatography (GC) Gas chromatography is so-called because the mobile phase is a gas Comprises both: Gas-liquid chromatography (GLC) where the stationary phase is a liquid and the sorption process is mainly partition. and Gas-solid chromatography (GSC) where the stationary phase is a solid and adsorption is the major sorption process.

  28. GC columns • GC column is the heart of the gas chromatograph. Consists of a coil of stainless steel, glass or fused silica (quartz) tubing between 1 and 100 m long and having an internal diameter of between 0.1 and 3 mm. • Column is enclosed in thermostatically controlled oven whose temperatures can be held constant to within +0.1oC. • The operating temperature of the GC oven may remain constant during an analysis – isothermal or automatically increased at a predetermined rate to speed the elution process – temperature programming. More on this later.

  29. GC columns Packed column Capillary column

  30. Experimental Setup at Bristol Tedlar Bag or direct Sample ADS detector Gas Chromatography Column Adsorption / Desorption System & Microtrap 1000 fold increase Chromatograph

  31. Flame ionisation detector (FID): universal detector • The FID is the most widely used GC detector. • Effluent gas from the column is mixed with H2 and air and burned at a small jet. • The jet forms the –ve electrode of an electrolytic cell. The +ve collector electrode is positioned above the flame. • The potential across the two electrodes being about. 200 V. • As organic compounds emerge from the column they burn in the flame creating ions which create a current between the electrodes. • The FID responds to virtually all organic compounds with a very high sensitivity and widest linear range (107) of any detector (ng – mg)

  32. Electron capture detector (ECD): selective detector • Based on the use of a b-ray ionizing source. • As carrier gas flows through the source the 63Ni or 3H ionise the gas forming ‘slow’ electrons which migrate towards the anode giving a standing current when only carrier gas is present. • If an analyte with a high electron affinity elutes from the GC column some of the electrons will be ‘captured’ thereby reducing the current in proportion to its concentration. • The detector is very sensitive to compounds containing halogens, S, anhyrides, peroxides, congugated carbonyls, nitrites, nitrates and organometallics. AB + e-  AB- non-dissociative A. + B- dissociative • Linear range only 102 to 103.

  33. Compound identification by GC • Most common means of identifying analytes in GC is by direct comparisons of retention times with an authentic sample analysed under the same conditions. • Comparing retention times on two GC phases of contrasting properties improves confidence in the identification. • Best way is to connect GC to MS and obtain mass spectra. Unknowns Standards

  34. Replacement CFC observations at Mace Head • HFC-134a (CF3CH2F) • Major HFC replacement for • CFC-12 (CF2Cl2) in domestic & auto applications • Growth 3 ppt/yr (25%/yr, 1999) • HCFC-142b (CFCl2CH3) • Foam plastics • Significant use in 1970s & 80s • Growth 1.1 ppt/yr

  35. Surface Acoustic Wave sensors (SAWs) The Sauerbrey equation (1957) Df = - 2.26 x 10-6 f2Dm/A As the mass goes up the frequency comes down The higher the resonant frequency of the crystal the greater the sensitivity SAWs are NOT selective

  36. SAW Recognition element (MIP) Recognition Elements

  37. Recognition Element Coat with selective polymer e.g. Molecular Imprinted Polymers Nandrolonea, Terpenesb, Amino Acidsc Self Assembled Monolayers PAHsd Biosensing Enzymese Poly-Butadiene Ozone a. Percival et al., 2002; b Percival et al., 2001; c Stanley et al., 2003a; d Stanley et al., 2003b; e. Evans et al., 2006

  38. Comparison with UV measurements QCM spin coated dilute mixture of poly-butadiene in cyclohexane DQCM system utilised 5MHz unpolished AT-cut, 25 mm diameter, with Cr/Au contacts L.O.D. = 3 ppb Measurements made indoors 10 second averages

  39. Conclusions • Optical techniques can be used to detect very low concentrations if a long pathlength can be used (expensive) • GC based techniques good for stable species but bulky and low frequency measurement (relatively expensive) • SAWs etc. small, low cost, specific sensors?

  40. Thanks Prof. Andrew Orr-Ewing Prof. Richard Evershed Dr. Simon O’ Doherty Dr. Carl Percival

More Related