1 / 45

Chapter 2. Molecular Weight and Polymer Solutions

POLYMER CHEMISTRY . Chapter 2. Molecular Weight and Polymer Solutions. 2.1 Number average and weight average molecular weight 2.2 Polymer solutions 2.3 Measurement of number average molecular weight 2.4 Measurement of weight average molecular weight 2.5 Viscometry

libitha
Download Presentation

Chapter 2. Molecular Weight and Polymer Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. POLYMER CHEMISTRY Chapter 2. Molecular Weight and Polymer Solutions 2.1 Number average and weight average molecular weight 2.2 Polymer solutions 2.3 Measurement of number average molecular weight 2.4 Measurement of weight average molecular weight 2.5 Viscometry 2.6 Molecular weight distribution

  2. POLYMER CHEMISTRY 2.1 Number Average and Weight Average Molecular Weight A. The molecular weight of polymers a. Some natural polymer (monodisperse) : All polymer molecules have same molecular weights.  b. Synthetic polymers (polydisperse) : The molecular weights of  polymers are distributed         c. Mechanical properties are influenced by molecular weight  much lower molecular weight ; poor mechanical property much higher molecular weight ; too tough to process optimum molecular weight ; 105 -106 for vinyl polymer     15,000 - 20,000 for polar functional group containing polymer (polyamide)

  3. POLYMER CHEMISTRY • B. Determination of molecular weight • Absolute method : • mass spectrometry • colligative property • end group analysis • light scattering • ultracentrifugation. • b. Relative method : solution viscosity • c. Fractionation method : GPC

  4. WiMi POLYMER CHEMISTRY C. Definition of average molecular weight a. number average molecular weight ( Mn)   Mn= (colligative property and  end group analysis) b. weight average molecular weight ( Mw) Mw= (light scattering)  i i Ni N M Wi

  5. NiMi2 POLYMER CHEMISTRY c. z average molecular weight ( MZ ) MZ= (ultracentrifugation) d. general equation of average molecular weight : M =      ( a=0 , Mn          a=1 , Mw            a=2 , Mz      ) e. Mz > Mw > Mn C. Definition of average molecular weight NiMi3 NiMia+1 NiMia

  6. POLYMER CHEMISTRY D. Polydispersity index :  width of distribution polydispersity index (PI) = Mw / Mn ≥ 1

  7. POLYMER CHEMISTRY E. Example of molecular weight calculation a. 9 moles, molecular weight (Mw) = 30,000 5 moles, molecular weight (Mw) = 50,000 (9 mol x 30,000 g/mol) + (5 mol x 50,000 g/mol) Mn= = 37,000 g/mol 9 mol + 5 mol 9 mol(30,000 g/mol)2 + 5 mol(50,000 g/mol)2 Mw = = 40,000 g/mol 9 mol(30,000 g/mol) + 5 mol(50,000 g/mol)

  8. = 35,000 g/mol 9 g + 5 g = 37,000 g/mol Mn= (9 g/30,000 g/mol) + (5 g/50,000 g/mol) (9 g/30,000 g/mol) + (5 g/50,000 g/mol) Mw = 9 g + 5 g POLYMER CHEMISTRY E. Example of molecular weight calculation b. 9 grams, molecular weight ( Mw) = 30,000 5 grams, molecular weight ( Mw ) = 50,000

  9. POLYMER CHEMISTRY 2.2 Polymer Solutions A. Process of polymer dissolution : two step first step : the solvent diffuses into polymer masses to make               a swollen polymer gel second step : swollen polymer gel breaks up to solution

  10. POLYMER CHEMISTRY 2.2 Polymer Solutions B. Thermodynamics of solubility : Gibb's free energy relationship G =H - TS ΔG < 0 : spontaneously dissolve    T and ΔS are always positive for dissolving process.    Conditions to be negative ΔG,    ΔH must be negative or smaller than TΔS.

  11. C.  Solubility parameter : δ Hmix=Vmix[( )1/2-()1/2]212 ψ1, ψ2 = volume fraction ΔE1/V1, ΔE2/V2 = cohesive energy densities δ1,δ2 = solubility parameter δ1, δ2 = (  )1/2 Hmix= Vmix(δ1 – δ2)212 E = Hvap- RT δ1 = ( )1/2  if δ1= δ2, then Hmix= 0      E1 E2 V1 V2 E V H vap - RT V POLYMER CHEMISTRY

  12. D. Small's and Hoy's G parameter a. Small(designated G derived from Heat of vaporization, Table 2.1) δ =  ( d : density , M :  molecular weight of unit ) ex) polystyrene           δ = = 9.0 b. Hoy(designated G based on vapor pressure measurement, Table 2.1) δ = ex) polystyrene :           δ = 1.05(133+28+735) 104 dG M M 1.05[131.5+85.99+6(117.1)] = 9.3 104 POLYMER CHEMISTRY dG M M

  13. E. Hydrodynamic volume of polymer molecules in solution.   to be depended on followings r 2 = ro22 s2=so22 (r2)1/2  = (ro2)1/2 • polymer-polymer interaction • b. solvent-solvent interaction • c. polymer-solvent interaction • d. polymer structure ( branched or not ) • e. brownian motion • r = end-to-end distance • s = radius of gyration Figure 2.1 Coil molecular shape The greater the value of α, the ‘better’ the solvent  α = 1, 'ideal' statistical coil.

  14. (r2)3/2 [η] = M POLYMER CHEMISTRY 2.2 Polymer Solutions F. theta(θ) temperature and theta(θ) solvent The lowest temperature at which α=1 : theta(θ) temperature  blink The solvent satisfied this condition : theta(θ) solvent  point G. Flory-Fox equation : The relationship among hydrodynamic volumes,     intrinsic viscosity and molecular weight [η] : intrinsic viscosity M : average molecular weight                       ψ : Flory constant (3×1024/mol)                       r : end-to-end distance

  15. POLYMER CHEMISTRY 2.2 Polymer Solutions H. Mark-Howink-Sakurada equation : The relationship between intrinsicviscosity and molecular weight [η] : intrinsic viscosity                         K , a : constant for specific polymer and solvent M : average molecular weight I. Important properties of polymer solution : solution viscosity a. paint spraying and brushing b. fiber spinning [η] = KMa

  16. POLYMER CHEMISTRY 2.3 Measurement of Number Average Molecular Weight 2.3.1 End-group Analysis A. Molecular weight limitation up to 50,000 B. End-group must have detectable species a. vinyl polymer : -CH=CH2    b. ester polymer : -COOH, -OH    c. amide and urethane polymer : -NH2, -NCO    d. radioactive isotopes or UV, IR, NMR detectable functional group

  17. POLYMER CHEMISTRY 2.3 Measurement of Number Average Molecular Weight 2 x 1000 x sample wt Mn = C. meq COOH + meq OH D. Requirement for end group analysis 1. The method cannot be applied to branched polymers. 2. In a linear polymer there are twice as many end of the chain and groups as polymer molecules. 3. If having different end group, the number of detected end group       is average molecular weight. 4. End group analysis could be applied for polymerization mechanism identified E. High solution viscosity and low solubility : Mn = 5,000 ~ 10,000

  18. FIGURE 2.2 Schematic representation of a membrane osmometer.

  19. RT )C=0 = + A2C ( c Mn 2.3.2 Membrane Osmometry A. According to van't Hoff equation limitation of : 50,000~2,000,000     The major error arises from low-molecular-weight species diffusing     through the membrane. FIGURE 2.3 Automatic membrane osmometer [Courtesy of Wescan Instruments, Inc.]

  20. /c RT Mn Slope = A2 C POLYMER CHEMISTRY FIGURE 2.4. Plot of reduced osmotic pressure (/c) versus concentration (c).

  21. RT2 Tf + A2C ( )C=0 = Hf Mn C POLYMER CHEMISTRY 2.3.3  Cryoscopy and Ebulliometry A. Freezing-point depression (Cryoscopy) Tf  : freezing-point depression,         C :  the concentration in grams per cubic centimeter         R :  gas constant         T : freezing point Hf: the latent heats of fusion         A2 : second virial coefficient

  22. RT2 Tb + A2C ( )C=0 = C HvMn POLYMER CHEMISTRY 2.3.3  Cryoscopy and Ebulliometry   B. Boiling-point elevation (Ebulliometry) Tb   : boiling point elevation Hv  : the latent heats of vaporization We use thermistor to major temperature. (1×10-4℃)     limitation of Mn : below 20,000

  23. RT2 T = ( )m 100 POLYMER CHEMISTRY 2.3.4 Vapor Pressure Osmometry The measuring vapor pressure difference of solvent and solution  drops.  λ : the heat of vaporization per gram of solvent                         m : molality limitation of Mn : below 25,000   Calibration curve is needed to obtain molecular weight of polymer sample    Standard material : Benzil

  24. POLYMER CHEMISTRY 2.3.5 Mass spectrometry A. Conventional mass spectrometer for low molecular-weight compound   energy of electron beam : 8 -13 electron volts (eV)

  25. POLYMER CHEMISTRY B. Modified mass spectrometer for synthetic polymer  a. matrix-assisted laser desorption ionization mass spectrometry       (MALDI-MS) b. matrix-assisted laser desorption ionization time-of-flight       (MALDI-TOF) c. soft ionization      sampling : polymers are imbedded by UV laser absorbable organic                compound containing Na and K. d. are calculated by using mass spectra. e. The price of this mass is much more than conventional mass. f. Up to = 400,000 for monodisperse polymers.

  26. POLYMER CHEMISTRY FIGURE 2.5. MALDI mass spectrum of low-molecular-weight poly(methyl methacrylate).

  27. POLYMER CHEMISTRY 2.3.6 Refractive Index Measurement A. The linear relationship between refractive index and 1/Mn . B. The measurement of solution refractive index by refractometer. C. This method is for low molecular weight polymers. D. The advantage of the method is simplicity.

  28. POLYMER CHEMISTRY 2.4 Measurement of Weight Average Molecular Weight 2.4.1 Light Scattering A. The intensity of scattered light or turbidity(τ) is depend on following factors a. size   b. concentration   c. polarizability   d. refractive index   e. angle   f. solvent and solute interaction g. wavelength of the incident light

  29. 1 Hc + 2A2C =  MP()  = HcMW 32 No2(dn/dc)2 H = 3 4No POLYMER CHEMISTRY g. wavelength of the incident light C  : concentration                          no: refractive index of the solvent         λ : wavelength of the incident light     No : Avogadro's number     dn/dc : specific refractive increment      P() : function of the angle,θ     A2 : second virial coefficient      Zimm plot (after Bruno Zimm) : double extrapolation of concentration  and angle to zero (Fig 2.6)

  30. Hc  C=0 Experimental 1 Extrapolated Mw sin2/2 + kc POLYMER CHEMISTRY FIGURE 2.6. Zimm plot of light-scattering data.

  31. POLYMER CHEMISTRY 2.4.1 Light Scattering B. Light source    High pressure mercury lamp and laser light. C. Limitation of molecular weight( ) : 104~107 FIGURE 2.7. Schematic of a laser light-scattering photometer.

  32. POLYMER CHEMISTRY 2.4.2 Ultracentrifugation A. This technique is used a. for protein rather than synthetic polymers. b. for determination of Mz B. Principles : under the centrifugal field, size of molecules are distributed perpendicularly axis of rotation. Distribution process is called sedimentation.

  33. 2.5 Viscometry A. IUPAC suggested the terminology of solution viscosities as following.   Relative viscosity :   : solution viscosity o: solvent viscosity t : flow time of solution t o: flow time of solvent Specific viscosity : Reduced viscosity : Inherent viscosity : Intrinsic viscosity :  t - to  - o  sp = rel - 1 = = t o to rel = = o to sp rel - 1 rel = = c sp c c [] = ( )c=o=(ηinh)C = 0 c In rel inh = c POLYMER CHEMISTRY

  34. POLYMER CHEMISTRY FIGURE 2.8. Capillary viscometers : (A) Ubbelohde, and (B) Cannon-Fenske.

  35. Mw> Mv > Mn POLYMER CHEMISTRY B. Mark-Houwink-Sakurada equation [η] = KMa log[η] = logK + alogMv (K, a : viscosity-Molecular weight constant, table2.3) Mv        is closer to Mw       than Mn

  36. TABLE 2.3. Representative Viscosity-Molecular Weight Constantsa POLYMER CHEMISTRY Solvent Cyclohexane Cyclihexane Benzene Decalin Benzyl alcohol Cyclohexanone Toluene Toluene DMFg DMF 1-Chlorobutane 1-Chlorobutane M-Cresol M-Cresol Temperature, oC 35 d 50 25 135 155.4d 20 30 30 25 25 30 30 25 25 Molecular Weight Range  10-4 8-42e 4-137e 3-61f 3-100e 4-35e 7-13f 5-50f 5-16f 5-27e 3-100f 5-55e 4.18-81e 0.04-1.2f 1.4-5f Polymer Polystyrene (atactic)c Polyethylene (low pressure) Poly(vinyl chloride) Polybutadiene 98% cis-1,4, 2% 1,2 97% trans-1,4, 3% 1,2 Polyacrylonitrile Poly(methyl methacrylate-co-styrene) 30-70 mol% 71-29 mol% Poly(ethylene terephthalate) Nylon 66 ab 0.50 0.599 0.74 0.67 0.50 1.0 0.725 0.753 0.81 0.75 0.67 0.63 0.95 0.61 Kb 103 80 26.9 9.52 67.7 156 13.7 30.5 29.4 16.6 39.2 17.6 24.9 0.77 240 aValue taken from Ref. 4e. bSee text for explanation of these constants. cAtactic defined in Chapter 3. d temperature. eWeight average. fNumber average. gN,N-dimethylformamide.

  37. POLYMER CHEMISTRY 2.6 Molecular Weight Distribution 2.6.1 Gel Permeation Chromatography (GPC) A. GPC or SEC (size exclusion chromatography) a. GPC method is modified column chromatography.   b. Packing material: Poly(styrene-co-divinylbezene), glass or silica bead swollen and porous surface. c. Detector : RI, UV, IR detector, light scattering detector d. Pumping and fraction collector system for elution.  e. By using standard (monodisperse polystyrene), we can obtain Mn , Mw .

  38. POLYMER CHEMISTRY FIGURE 2.9. Schematic representation of a gel permeation chromatograph.

  39. Detector response Baseline Elution volume (Vr) (counts) POLYMER CHEMISTRY FIGURE 2.10. Typical gel permeation chromatogram. Dotted lines represent volume “counts.”

  40. 109 108 107 106 105 POLYMER CHEMISTRY FIGURE 2.11. Universal calibration for gel permeation chromatography. THF, tetrahydrofuran. Log([η]M)           Polystyrene (linear) Polystyrene (comb) Polystyrene (star) Heterograft copolyner Poly (methyl methacrylate) Poly (vinyl chloride) Styrene-methyl methacrylate graft copolymer Poly (phenyl siloxane) (ladder) Polybutadiene            18 20 22 24 26 28 30 Elution volume ()5 ml counts, THF solvent)

  41. 106 Molecular weight (M) 105 104 103 Retention volume (Vr) (counts) POLYMER CHEMISTRY FIGURE 2.12. Typical semilogarithmic calibration plot of molecular weight versus retention volume.

  42. 1 K1 K2 logM2 = ( )log( ) + ( 1 + a1 )logM1 1 + a2 1 + a2 POLYMER CHEMISTRY B. Universal calibration method  to be combined Mark-Houwink-Sakurada equation [η]1M1 = [η]2M2

  43. POLYMER CHEMISTRY 2.6.2 Fractional Solution Soxhlet-type extraction by using mixed solvent. Reverse GPC : from low molecular weight fraction                  to high molecular weight fraction Inert beads are coated by polymer sample.

  44. POLYMER CHEMISTRY 2.6.3 Fractional Precipitation Dilute polymer solution is precipitated by variable non-solvent mixture. Precipitate is decanted or filtered Reverse fractional solution : from high molecular weight fraction to    low molecular fraction

  45. POLYMER CHEMISTRY 2.6.4. Thin-layer Chromatography (TLC) Alumina- or silica gel coated plate. Low cost and simplicity. Preliminary screening of polymer samples or monitoring polymerization processes.

More Related