1 / 10

Two-Zone Model for Interior Wall Cladding in Construction

Learn how to create an interior wall cladding using a two-zone model with specific blocks, materials, and surface transfer coefficients for better construction outcomes.

ledell
Download Presentation

Two-Zone Model for Interior Wall Cladding in Construction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. An example of a model with two zones Zone 1 with four walls and four windows Zone 2 with four walls and four windows A common wall between the zones

  2. The common wall between the zones is constructed from an ordinary ’wall block’. Take an ordinary wall block from the library and look behind the block mask – see the example below This is the ORIGINAL wall BLOCK The block should be replaced by one of this kind

  3. Inputs Zone 1 and Radiation 1 replace Geometry NEW BLOCK – a common wall between two zones INTERIOR WALL CLADDING 1 replaces EXTERIOR WALL CLADDING

  4. NEW BLOCK New Construction output INTERIOR WALL CLADDING 1 is a copy of INTERIOR WALL CLADDING 2, with one new output – Last node.

  5. Last node.

  6. CHANGES IN THE MAIN BLOCK MASK

  7. CHANGES IN THE MAIN BLOCK MASK

  8. Define material 1 in the block mask of INTERIOR WALL CLADDING 1

  9. Go one level below and define surface transfer coefficients alfacin1 and betaPin1 in the block mask of Internal surface node /CTH. Check the names of the parameters with the ones specified in the main block mask (see slide 6)

  10. Do the same for the block INTERIOR WALL CLADDING 2 / Internal surface node /CTH. Check the names of the parameters with the ones specified in the main block mask (see slide 6)

More Related