1 / 6

IBIS Connector Models: Working Group Status

IBIS Connector Models: Working Group Status. Fabrizio Zanella, EMC Corporation. IBIS Connector BIRD. Group consists of 9 members from 7 companies. Molex, Hyperlynx, Berg, Teradyne, EMC, Ansoft and AMP are represented. Good mix of connector companies and software vendors.

leal
Download Presentation

IBIS Connector Models: Working Group Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IBIS Connector Models:Working Group Status Fabrizio Zanella, EMC Corporation IBIS SUMMIT 10/15/98

  2. IBIS Connector BIRD • Group consists of 9 members from 7 companies. • Molex, Hyperlynx, Berg, Teradyne, EMC, Ansoft and AMP are represented. • Good mix of connector companies and software vendors. • Conference calls 2-3x/months + emails. IBIS SUMMIT 10/15/98

  3. IBIS Connector BIRD • Preliminary BIRD is being drafted • Connector IBIS model should be a separate document from IBIS 3.1, etc. • Defined ~ 25 new key words not in IBIS 3.1 spec • Spec is defining single and multiline connector models • Mated model, backplane and daughtercard half matrix models will be included. IBIS SUMMIT 10/15/98

  4. IBIS Connector BIRD • Model can be lumped or distributed. • Model can be created from 2D or 3D solver. • Model will have several L,C matrix sections. • Defined separate model (swath) • method of defining small section which is repeated throughout the entire connector • helps in reducing size of connector model IBIS SUMMIT 10/15/98

  5. Schematic of Connector Model IBIS SUMMIT 10/15/98

  6. IBIS Connector BIRD • Option of including JPEG file as part of IBIS connector model, so user can see picture of connector. • Looking into how to model ‘T’ stubs and loops in connectors. • We are interested in requesting funding from IBIS committee for the connector model parser. • IBIS connector BIRD will be completed in January ‘99. IBIS SUMMIT 10/15/98

More Related