1 / 10

Chapter Objectives

Chapter Objectives. After completing this chapter you will be able to: Describe Classical IP over ATM (CLIP) Describe the function of an ATMARP server Define a logical IP subnet (LIS) Describe the format of an ATMARP packet. Classical IP over ATM (CLIP).

larondaj
Download Presentation

Chapter Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter Objectives After completing this chapter you will be able to: • Describe Classical IP over ATM (CLIP) • Describe the function of an ATMARP server • Define a logical IP subnet (LIS) • Describe the format of an ATMARP packet

  2. Classical IP over ATM (CLIP) • CLIP was the earliest model proposed for running IP over ATM (1993) • CLIP is a combination of IETF RFC 1577, Classical IP and ARP over ATM and RFC 1483, Multiprotocol Encapsulation over AAL5 • CLIP superimposes an IP network on top of ATM such that IP routing architecture remains unchanged

  3. 192.168.20.5 192.168.21.5 255.255.255.0 255.255.255.0 A B 192.168.20.5 192.168.21.5 255.255.255.0 255.255.255.0 Ethernet segment Ethernet segment 192.168.20.1 192.168.21.1 A B 255.255.255.0 255.255.255.0 Ethernet segment 192.168.20.1 192.168.21.1 255.255.255.0 ClassicalModel

  4. ClassicalModelAnalysis • Limitations of the classical model • Ignorance of underlying technology • Possible introduction of inefficiencies • CLIP vs Ethernet • CLIP operation similar to that of IP over Ethernet • Uses ATMARP to map IP addresses to ATM addresses • No ATM broadcast capability, so ATMARP server used • Why? • Familiarity - network administrators knew IP subnetting • Security - firewalls operate at an IP level

  5. 2 bytes 4 bytes 0 Hardware Type Protocol Type Operation Sender's hardware address length Sender's protocol address length Target's protocol address length Target's hardware address length Sender's ATM Address (20 bytes) Sender's Protocol Address Target ATM Address (20 bytes) Target Protocol Address ATMARP Packet Format

  6. ATM Network LIS 2 LIS 1 LIS 3 Logical IP Subnets (LISs)

  7. Encapsulation and MTU • LLC/SNAP encapsulation is used with CLIP by default • Used for IP and for all ATMARP messages • MTU is 9180 bytes • Inherited from SMDS specification for interoperability • MTU large enough to minimise IP fragmentation

  8. ATM ARP Server. Maintains a table of IP addresses mapped to corresponding ATM addresses ATMARP server issues an Inverse ATMARP when a connection is opened LIS Host replies with both it's ATM and IP addresses ATMARP Server

  9. B's ATM address? A B B's ATM address is ... Direct ATM connection CLIPOperation - SVCs

  10. A B B's IP address? PVC B's IP address is ... CLIPOperation - PVCs

More Related