1 / 9

Design a Wien Bridge Oscillator to operate at a frequency of 5kHz

Design a Schmitt trigger such that the switching voltage is 1 Volts and the hysteresis width is 80 mV. Assume VH = +12V and VL = -12V. Draw and label the circuit diagram. Design a Schmitt trigger oscillator to operate at a frequency of 8kHz. Draw and label the circuit diagram.

ktimothy
Download Presentation

Design a Wien Bridge Oscillator to operate at a frequency of 5kHz

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design a Schmitt trigger such that the switching voltage is 1 Volts and the hysteresis width is 80 mV. Assume VH = +12V and VL = -12V. Draw and label the circuit diagram

  2. Design a Schmitt trigger oscillator to operate at a frequency of 8kHz. Draw and label the circuit diagram

  3. Using an AD521 instrumentation amplifier what values of Rs and RG are required to give a gain of 50

  4. An voltage amplifier has an open loop mid band gain of 1000 and a feedback fraction of 0.01. Determine the gain with feedback? • If the open loop input resistance is 2kΩdetermine the closed loop input resistance

  5. Design a Wien Bridge Oscillator to operate at a frequency of 5kHz

  6. Design a Butterworth low pass filter with a four pole response with a cut-off frequency of 20kHz

  7. Design a Howland Current Source to provide an output of 5mA

More Related