1 / 12

Braced Line Post Ratings IEEE T&D R. Allen Bernstorf Hubbell Power Systems

Braced Line Post Ratings IEEE T&D R. Allen Bernstorf Hubbell Power Systems. Why Use a Braced Line Post?. Line Compaction Fixed Conductor Position Controlled Transverse Loading Swing All achieved with a line post Mechanical Capabilities Vertical Loading Increased Over Standard Line Post

kevyn
Download Presentation

Braced Line Post Ratings IEEE T&D R. Allen Bernstorf Hubbell Power Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Braced Line Post RatingsIEEE T&D R. Allen BernstorfHubbell Power Systems

  2. Why Use a Braced Line Post? • Line Compaction • Fixed Conductor Position • Controlled Transverse Loading Swing • All achieved with a line post • Mechanical Capabilities • Vertical Loading • Increased Over Standard Line Post • Based Upon Strength of Components • Longitudinal Loading – Based Upon Design • Pivoting Design – Tensile Rating of Post • BLP – Cantilever Rating of Post • Transverse – Based Upon Post

  3. Braced Line Posts Pc ≡ Post compressive loading St ≡ Suspension tension loading α ≡ Upsweep angle of post (w/r to horizontal) β ≡ Suspension angle (w/r to horizontal) V ≡ Vertical load to be sustained.

  4. Calculations V=St*sin(β)+Pc*sin(α) St*cos(β)=Pc*cos(α) St=(V*cos(α))/((cos(α)*tan(β)+sin(α)) *cos(β))

  5. Suspension String Subassy. Rating of Suspension Rating of Series Hardware Rating of Post Attachment Hole ST≤ Any of These. Considerations

  6. Considerations • Line End Post Fitting • Tension • Vertical • Longitudinal • Combined Magnitude of Loads ≤ Cap Rating

  7. Considerations • Line Post Compression Loading • Pc = St*cos(β)/ cos(α) • Buckling Becomes an Issue – Compression loading on Column • Euler’s Buckling Equations • Buckling load= π2*E*I k*l2 • Porcelain – Increase I • Polymer – Work within Elastic Buckling Limit • What is “k”?

  8. Buckling Loads

  9. Measured Values

  10. Fitted Curves • Braced Line Post • Buckling load= (π2*E*I)/(1.33*L2) • Pivoting Horizontal Vee • Buckling load= (π2*E*I)/(1.03*L2) • Fixed Base Horizontal Vee • Buckling load= (π2*E*I)/(1.02*L2)

  11. Vertical Capabilities

  12. Questions?

More Related