1 / 13

GPS Waypoint Navigation

GPS Waypoint Navigation. Team M-2: Charles Norman (M2-1) Julio Segundo (M2-2) Nan Li (M2-3) Shanshan Ma (M2-4) Design Manager : Zack Menegakis. Presentation 3: Size Estimates/Floorplan February 6, 2006. Overall Project Objective:

kelli
Download Presentation

GPS Waypoint Navigation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. GPS Waypoint Navigation Team M-2: Charles Norman (M2-1) Julio Segundo (M2-2) Nan Li (M2-3) Shanshan Ma (M2-4) Design Manager: Zack Menegakis Presentation 3: Size Estimates/Floorplan February 6, 2006 Overall Project Objective: Design a chip that navigates an aircraft to pre-determined waypoints.

  2. Status • Design Proposal • Project chosen • Architecture Proposal • MATLAB simulated • Behavioral Verilog written • Behavioral Verilog simulated • Floorplan • Structural Verilog written • Structural Verilog simulated • Floorplan and more accurate transistor count • Schematic Design • Layout • Simulations

  3. Design Decisions • Accuracy • Speed ~ 1 knot • Angle ~1 degree • Altitude ~1 feet • GPS ~1 second (105 feet) • No Look-Up Tables • Black Box Calculator for Square Root and atan2 • Effects Verification • Power • On/Off Power Control for Logic Modules

  4. Design Decisions • Inputs • Latitude & Longitude Coordinates : 46 bits total • Latitude : -180˚ to 180˚, Longitude : -90˚ to 90˚ • Degrees : 9-bit 2's complement • Minutes : 7-bit 2's complement • Seconds : 7-bit 2's complement • Speed :10-bit unsigned (knots) • Altitude : 15-bit unsigned (feet) • Mode : 2-bit unsigned • Outputs • Angle Correction : 9-bit 2’s complement • Speed Correction : 11-bit 2’s complement • Altitude Correction : 16-bit 2’s complement • Total • 109 bits

  5. Block Level System Diagram Pre-Black Box Post Black Box

  6. Floorplan

  7. Transistor Estimates

  8. Area Estimates

  9. Structural Verilog module sub6 (Out, A, B); //6*34+7*2=218 transistors, 1267.76 output [6:0] Out; //2's complement input [5:0] A, B; //unsigned not (n0, B[0]); not (n1, B[1]); not (n2, B[2]); not (n3, B[3]); not (n4, B[4]); not (n5, B[5]); fa f1(Out[0], c0, A[0], n0, 1'b1); fa f2(Out[1], c1, A[1], n1, c0); fa f3(Out[2], c2, A[2], n2, c1); fa f4(Out[3], c3, A[3], n3, c2); fa f5(Out[4], c4, A[4], n4, c3); fa f6(Out[5], c5, A[5], n5, c4); not (Out[6], c5); /* always@* begin $monitor ( "%d %d", $time, Out); end */ endmodule //sub6111 module heading ( output [6:0] lat_change, lon_change, input [5:0] prelon_min, prelon_sec, prelat_min, prelat_sec, input [5:0] curlat_min, curlat_sec, curlon_min, curlon_sec, input control); wire [6:0] lat_sec,lon_sec,lat_min,lon_min,lat,lon,afinal,ofinal; sub6 as(lat_sec, curlat_sec, prelat_sec); sub6 os(lon_sec, curlon_sec, prelon_sec); sub6 am(lat_min, curlat_min, prelat_min); sub6 om(lon_min, curlon_min, prelon_min); //taking care of the +/-60 degree cases //only need to consider the 6,4,3,2 bit not (lat[6],lat_sec[6]); not (lat[2],lat_sec[2]); xor (ax62,lat_sec[6],lat_sec[2]); //can switch both to nxor xor (lat[3],ax62,lat_sec[3]); //if wanted xor (ax63,lat_sec[6],lat_sec[3]); and (ax,ax62,ax63); xor (lat[4],lat_sec[4],ax); //affect 4 cases but only 2 apply buf (lat[0],lat_sec[0]); buf (lat[1],lat_sec[1]); buf (lat[5],lat_sec[5]); ……… and_super actrl(lat_change, afinal, control); and_super octrl(lon_change, ofinal, control); endmodule

  10. Metal Directions Vdd, Gnd, Local Interconnect Metal 1: Horizontal Metal 2: Vertical Clk, Global Interconnect Metal 3: Horizontal Metal 4: Vertical

  11. Problems • Clock Speed • 1Hz too slow? • Lowest Supported Speed 65 knots • Typical UAV Cruising Speed is 70-100 knots • Pins v. Accuracy • 109 Pins • Series not an option, room for error from GPS

  12. What’s Next… Here’s what’s on our agenda for next week… • Reduce Pins? • Simulate Structural Verilog • Optimize Logic • Produce Module Schematics

  13. Questions?Comments?Ideas?

More Related