1 / 21

Friction

Friction. Friction results from relative motion between objects. Frictional forces are forces that resist or oppose motion. Types of Friction. Static friction Sliding friction Rolling friction. Types of Friction. Air friction Viscous friction. CAN I THINK ….?. Friction.

kchristie
Download Presentation

Friction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Friction • Friction results from relative motion between objects. • Frictional forces are forces that resist or oppose motion.

  2. Types of Friction • Static friction • Sliding friction • Rolling friction

  3. Types of Friction • Air friction • Viscous friction

  4. CAN I THINK ….?

  5. Friction Normal force (N) Ff = μ. RN Friction force (N) Coefficient of friction

  6. Calculate force of friction • A 10 N force pushes down on a box that weighs 100 N. • As the box is pushed horizontally, the coefficient of sliding friction is 0.25. • Determine the force of friction resisting the motion. Also find F at the point of sliding ?

  7. Sliding Friction Normal force (N) Fs = msFn Friction force (N) Coefficient of sliding friction

  8. COMPARISON STATIC SLIDING Fs OPPOSITE TO MOTION F > Fl Fs< Fl Fs / Rn = CONSTANT = μ = tanφ Ff ≠ f ( VELOCITY) • Ff OPPOSITE TO F • Ff = F • Ff < Fl • Ff / Rn = CONSTANT = μ = tanφ • Ff ≠ f ( AREA)

  9. Table of friction coefficients

  10. I THINK…. I CAN THINK….

  11. A steel pot with a weight of 50 N sits on a steel countertop. How much force does it take to start the pot sliding? Calculate using friction

  12. Calculate using friction • The engine applies a forward force of 1,000 Newton to a 500-kg car. • Find the acceleration of the car if the coefficient of rolling friction is 0.07.

  13. LAWS OF FRICTION • Basic properties of friction have been described as laws: • Amontons' 1st Law: The force of friction is directly proportional to the applied load. • Amontons' 2nd Law: The force of friction is independent of the apparent area of contact. • Coulomb's Law of Friction: Kinetic friction is independent of the sliding velocity. • Amontons' 2nd Law is an idealization assuming perfectly rigid and inelastic materials. For example, wider tires on cars provide more traction than narrow tires for a given vehicle mass because of surface deformation of the tyre.

  14. ENERGY IN FRICTION • According to the law of conservation of energy, no energy is destroyed due to friction, though it may be lost to the system of concern. Energy is transformed from other forms into heat • When an object is pushed along a surface, the energy converted to heat is given by: • E = μ ∫ RN . x dx

  15. WORK IN FRICTION • In the reference frame of the interface between two surfaces, static friction does nowork, because there is never displacement between the surfaces. In the same reference frame, kinetic friction is always in the direction opposite the motion, and does negative work. • The work done by friction can translate into deformation, wear, and heat that can affect the contact surface properties (even the coefficient of friction between the surfaces). This can be beneficial as in polishing. The work of friction is used to mix and join materials such as in the process of friction welding.

  16. FRICTION AN ENGINEERING PROBLEM • Bearing seizure or failure may result from excessive wear due to work of friction. As surfaces are worn by work due to friction, and surface finish of an object may degrade until it no longer functions properly.

  17. APPLICATION • SCREW JACK / LIFTING MACHINE • INCLINED PLANE • WEDGE

  18. FRICTION ANGLE • The angle of repose or, more precisely, the critical angle of repose is the steepest angle of descent or dip of the slope relative to the horizontal plane when material on the slope face is on the verge of sliding. This angle is given by the number (0°-90°) If the coefficient of static friction is known of a material, then a good approximation of the angle of repose can be made with the following function. • μ = tan φ , Where: μ is the coefficient of static friction φ is the angle of repose

  19. TYPICAL PROBLEMS…. WITH INCLINED PLANE RN F W SIN θ θ W COS θ W

  20. CAN I INTROSPECT…….?

  21. TYPICAL SITUATIONS • NUMERICALS…….. • On to the white board………

More Related