1 / 11

Direct Connection via USB port

Direct Connection via USB port. A great solution for recent computers with no or insufficient comports!!!. Introduction. For a PC Controlled DCN system one Comport is needed for direct connection with the CCU.

kayla
Download Presentation

Direct Connection via USB port

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Direct Connection via USB port • A great solution for recent computers with no or insufficient comports!!! Direct-Connection-USB en

  2. Introduction • For a PC Controlled DCN system one Comport is needed for direct connection with the CCU. • If the card encoder and/or label printer are used we need even more than one comport. • On the other hand more and more PC’s and Laptops are provided without comports or with only one comport these days. • By use of a USB to Serial Converter we can still use these PC’s as a Control PC for DCN!! Direct-Connection-USB en

  3. Introduction • This presentation describes how you have to set up direct connection via the USB port of your PC or Laptop. Direct-Connection-USB en

  4. Requirements • Central Control Unit LBB3500/15 or /35 • DCN software V9.00 or higher • Windows 98, 2000 or XP • Available USB port on PC • USB Serial Converter (including Driver Software) Direct-Connection-USB en

  5. Step 1 Connect USB to Serial Converter to the USB port of the PC or Laptop Direct-Connection-USB en

  6. Step 2 Install driver software • The USB Serial Converter contains driver software. The PC needs the driver software to communicate with the USB Serial Converter Direct-Connection-USB en

  7. Step 3 Check Device Manager • The USB to Serial Converter will always take an available COM port number. • In Device Manager you can see which comport number is assigned to the USB to Serial Converter.(COM5 in the example) Direct-Connection-USB en

  8. It doesn’t matter which Serial Port you choose during installation of the software. Direct-Connection-USB en

  9. Remark • If the DCN software was installed already you can skip this step. • It doesn’t matter which Serial Port you choose during installation of the software. Direct-Connection-USB en

  10. Step 4 Install DCN software LBB3590 • Change the Comport number to the number that is mentioned in the device manager.(see previous slide). • After this save and close the DCN.ini file. • The DCN.ini file is located in the Windows (or Winnt) directory on the harddisk. Direct-Connection-USB en

  11. Direct-Connection with USB • End of Section Direct-Connection-USB en

More Related