1 / 30

Enamelite LLC

Ceramic Spray AEROpaque For Titanium Crowns & Bridges Implant Abutments and Bars. Enamelite LLC. enamelitellc.com. Sandblast (120 um) Steam Clean Air Oxidize. Ti Bonder and Opaque Application Technique.

kasimir-harvey
Download Presentation

Enamelite LLC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Ceramic Spray AEROpaque For Titanium Crowns & BridgesImplant Abutmentsand Bars

  2. Enamelite LLC enamelitellc.com

  3. Sandblast (120 um) • Steam Clean • Air Oxidize

  4. Ti Bonder and Opaque Application Technique • Always use a analog holder through all steps to apply ceramic. • Prepare titanium surface to receive ceramic use a Clean Crosscut carbide bur. • Sandblast surface with minimum 120-150 micron aluminous oxide at a 45° degree angle with 20 to 30 pounds of air pressure. • Steam clean the restorations and let rest for minimum of 5-7 minutes to allow for natural oxide growth. • Using the analog holder to spray very light coat of Ti Bonder in front of suction device. Fire according to instructions. Properly applied Ti bonder will appear with a sheen and totally black color when applied properly. • Apply the opaque using same technique as bonder, two (2) coats , fired separately. • Glaze is the last application to make tissue are ideal for complimenting the tissue and etch the upper portion for optimal bonding to restoration.

  5. Apply Bonder Coat & Fire

  6. Analog Holder

  7. Micro Thin Ceramic Coating of Ti Abutment Pre Coating Thickness Post Coating Thickness

  8. Ideal Ti Bonder Coating for Optimal Bonding

  9. Enamelite Titanium Spray Bonder and Opaque Ti Bonder Sprayed Coping Ti Sprayed Opaque

  10. AEROpaque Titanium Denture Bar Uncoated Ti Bar AEROpaqued Ti Bar

  11. AEROpaqued Titanium Coping Substructures

  12. Importance Of Spray Glaze

  13. Apply Opaquer, Tints & Glaze

  14. Opaqued Abutment

  15. Etch & Silanate Abutment

  16. Insert Abutment

  17. Try In VITA Mark II 1M1 Crown

  18. Characterize & Glaze With VITA Akzent

  19. Cement With Variolink Veneer

More Related