1 / 16

Vapor Intrusion Attenuation Factors (AFs) – Measured vs . EPA Defaults A Case Study

Vapor Intrusion Attenuation Factors (AFs) – Measured vs . EPA Defaults A Case Study. Presented by Manu Sharma and Jennifer DeAscentis Presented at EPA Vapor Intrusion Workshop Amherst, Massachusetts October 18, 2004. Outline. Site Setting Environmental Data Measured and Default AFs

karli
Download Presentation

Vapor Intrusion Attenuation Factors (AFs) – Measured vs . EPA Defaults A Case Study

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Vapor Intrusion Attenuation Factors (AFs) – Measured vs. EPA DefaultsA Case Study Presented byManu Sharma and Jennifer DeAscentis Presented at EPA Vapor Intrusion Workshop Amherst, Massachusetts October 18, 2004

  2. Outline • Site Setting • Environmental Data • Measured and Default AFs • Role of Background • Modifications to Default AF

  3. Site Setting • Active equipment testing facility located in the northeast US • Urban setting – highway; other industrial/ commercial operations nearby • Long history of industrial activities – low volumes of chlorinated organics and hydrocarbon usage • Glacial outwash deposits – relatively high hydraulic conductivity • Depth to groundwater ~ 6 meters

  4. Outline • Site Setting • Environmental Data • Measured and Default AFs • Role of Background • Modifications to Default AF

  5. Sampling Locations

  6. Environmental Data • Sources and groundwater plume reasonably defined • Low VOC concentrations present in groundwater – order of 1 to 100 ug/l • Indoor air sampling locations • Known sources of VOCs (e.g., historical solvent usage areas) • Small and large buildings with different ventilation characteristics

  7. Indoor Air and Groundwater Data

  8. Outline • Site Setting • Environmental Data • Measured and Default AFs • Role of Background • Modifications to Default AF

  9. AF Calculation • Measured AFs • Range: average air concentration and range of measured groundwater concentrations at associated wells • Recommended Estimate: average air concentration and average groundwater concentration (temporal and spatial) at associated wells • Default AF from Figure 3b of EPA guidance • Depth to contamination = 4 m • Sandy soils

  10. Measured vs. EPA Default AFs

  11. Measured vs. EPA Default AFs(Cont’d) • Measured AF about an order of magnitude less than default AF (10-4vs. 10-3) • True AF may be even lower because: • Air sampling locations near sources – air concentrations biased high • Monitoring wells located downgradient of sources – groundwater concentrations biased low • No trend in measured AFs vs. building size or ventilation noted • Background may be masking indoor air concentrations attributable to subsurface contamination

  12. Outline • Site Setting • Environmental Data • Measured and Default AFs • Role of Background • Modifications to Default AF

  13. Site indoor air concentration range Background indoor air concentration range Role of BackgroundRange of Measured Site Indoor Air Concentrations versus Range of Literature Background Concentrations Background concentrations from McHugh et al., 2004.

  14. Role of Background • Measured indoor air concentrations at the Site consistent with literature background • Contributions from subsurface contamination vs. background at the Site cannot be conclusively apportioned • Site-specific background data needed • Background indoor and outdoor air concentrations should be characterized to place risks in proper perspective • Challenges in background definition • Variability in source and characteristics

  15. Outline • Site Setting • Environmental Data • Measured and Default AFs • Role of Background • Modifications to Default AF

  16. Modifications to Default AF • Building Area • Current value (100 m2) only applicable for small residential buildings • Need to develop AF graphs for other building sizes (medium, large) to expand applicability • Air Exchange Rate (AER) • Current value (0.25 hr-1) also applicable at small residential buildings • Users should have flexibility to use higher AERs – commercial buildings, warmer setting

More Related