1 / 18

14b - HSPF Water Quality Model Development

14b - HSPF Water Quality Model Development. Virginia Tech Biological Systems Engineering Department 2013 DEQ TMDL Workshop. HSPF Water Quality Model Development. Calibration/Validation WQ stations – Select stations that represent critical conditions and seasonal variability

kailey
Download Presentation

14b - HSPF Water Quality Model Development

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 14b - HSPF Water Quality Model Development Virginia Tech Biological Systems Engineering Department 2013 DEQ TMDL Workshop

  2. HSPF Water Quality Model Development • Calibration/Validation WQ stations – Select stations that represent critical conditions and seasonal variability • UCI Modification – Incorporate information into the UCI needed to simulate water quality • Water Quality Model Calibration & Validation – Discuss the essential steps in HSPF water quality model development • Diagnostic Model Runs and Contingencies – Describe the model runs used to verify that the model output is responding appropriately to model input

  3. Calibration/Validation WQ Stations Water Quality Stations • Select stations with numerous data • Several years • All seasons • Calibration & Validation

  4. Calibration/Validation WQ Stations • Spatial Considerations • Listing Stations • Other Stations

  5. Modifying the UCI for Bacteria Sources Pervious Land Segments Impervious Land Segments Reaches WSQOP = rate of runoff that will wash off 90% of quality constituent FSTDEC= in-stream first order decay rate

  6. Modifying the UCI for Bacteria Sources • Incorporate the information from the BSLC – Land Loads

  7. Modifying the UCI for Bacteria Sources • Incorporate the information from the BSLC – Direct Deposit to Stream • FILES Block • MUTSIN Block • NETWORK Block

  8. Modifying the UCI for Bacteria Sources • Incorporate any permitted sources (e.g. VPDES) • EXT SOURCES Block

  9. Water Quality Calibration Using HSPF • General Concepts • Output Management • Using the BSE Calibration Workbook • Calibrating the Model

  10. Water Quality Calibration – General Concepts • Considerations • Model should respond as expected • Calibration Period • Target bacteria • Matching Data • Point valued observed data • Mean valued simulated data • What to change in the UCI? • FSTDEC • WSQOP

  11. WQ Calibration - Output Management • Set up GENER for E. coli translator EC=(FC0.91905)×0.98814866 • GENER Block • NETWORK Block

  12. WQ Calibration – The BSE Calibration Workbook Consider more than just the basic plots Point valued vs. mean valued Five-day window concept Five-day range of values surrounding each observed point

  13. Five-day WQ Calibration Window

  14. Five-day WQ Calibration Window

  15. WQ Calibration: Calibrating the Model • What to change in the UCI? • FSTDEC • WSQOP . . . And if that doesn’t work? • Initial Estimates • Better describe the watershed conditions ?

  16. Diagnostic Runs • Early runs to provide insight regarding model performance • Discover issues early and make adjustments if conditions on the ground warrant it • Examples: • Baseflow/interflow violations of WQS? • Wildlife only violations of WQS? • Extreme peaks followed by deep troughs? • In-stream contributions agree with BSLC?

  17. Contingencies • Adjustments to FTABLE(s) – stagnation • Stage cutoff • Revising BSLC based on Land Use or other factors 

  18. Questions/Comments

More Related