1 / 8

M3UA (MTP3-User Adaptation Layer)

M3UA (MTP3-User Adaptation Layer). <draft-ietf-sigtran-m3ua-02.txt> ******* SS7 ****** IP ******* * SP *------------* SG *------------*IP SEP* ******* ****** ******* +------+ +------+

kaemon
Download Presentation

M3UA (MTP3-User Adaptation Layer)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. M3UA (MTP3-User Adaptation Layer) <draft-ietf-sigtran-m3ua-02.txt> ******* SS7 ****** IP ******* * SP *------------* SG *------------*IP SEP* ******* ****** ******* +------+ +------+ | ISUP | <---------------------------> | ISUP | +------+ +-------------+ +------+ | MTP | <----> | MTP | M3UA | <----> | M3UA | | L3 | <----> | L3 +------+ <----> +------+ | L2 | <----> | L2 | SCTP | <----> | SCTP | | L1 | <----> | L1 +------+ <----> +------+ | | | | UDP | <----> | UDP | +------+ +-------------+ +------+ SP - SS7 Signaling Point (SS7 SEP or STP) IP SEP - IP-based Node (e.g., MGC, IP SCP, …) User - MTP3-User Protocol (e.g., ISUP, SCCP, TUP, ..) SCTP - Simple Common Transmission Protocol Example

  2. M3UA Principles • Supports MTP3-User Interface and Services (Transparent to MTP3-User) • Open/Closes SCTP Transport Associations • Starts/Stops Traffic across an open SCTP Association • Allows Flexible Message Distribution (e.g., SS7 OPC/DPC/SLS/CIC) to ASPs • ASP Fail-over support within AS list • N+k Redundancy Support • Load-balancing Support • Allows ASP signalling through redundant SGs to SS7 Network • Does not re-encode MTP-3 Routing Label / SIO in MTP-Transfer primitive • SCTP Stream Mapping

  3. Changes in M3UA Issue 2 • Removed explicit SCN Protocol Identifier & Protocol Identifier Parameters. Now use MTP3 SIO and/or Network Appearance (if required)  • Cleaned up SG configuration terminology (i.e., Routing Key, AS, ASP, Routing Context, SPMC, Network Appearance) • Expanded to include n+k redundancy, load-sharing • Better description of fail-over operation • Added Ability for ASP to route SS7 traffic across redundant SGs • Added Point Code Lists in SSNM Messaging (DUNA, DAVA, SCON…) • Made SSNM DAUD (Audit) more flexible

  4. Changes - Continued • Added State Change Notification SG-ASPs in AS to allow better coordination • Use Cases Expanded • Added Optional M3UA-level Heartbeat

  5. Current Issues • Impact of a future registration protocol component [M3UA, M2UA, IUA] • Implementation-dependent Parameters or Messages [M3UA, M2UA, IUA] (Agreed but not added yet) • New SS7 Network Unavailable message? [M3UA] (Agreed but not added yet) • Nodal inter-working function still confusing? [M3UA] • More Use cases required in Section 4 (Agreed but not added yet) • Timer provisional values required. [M3UA, M2UA, IUA]

  6. Current Issues • ASP "graceful shutdown" case required? [M3UA, M2UA, IUA]Provide consistent use of MUST, SHALL, MAY etc as in rfc – see SCTP. New Items from List: • Add possible case of SG sending UPU message into SS7 network when it determines that all ASPs in SPMC is no longer available, at least for a particular User Part. • TCP text proposal. Sentence or two in introduction of Adaptation layer docs and later Section/Annex with more info as agreed on Design Team call? • IP to IP M3UA? Section possible to describe M3UA operation where two communicating points are in IP network with no need for an SG. Probably start with the idea that DUNA/DAVA/SCON/UPU and related procedures are omitted. Basis for BICC STC?

  7. Current Issues • Specify explicitly Data recovery from a failed SCTP Association (e.g., to ASP1) to new SCTP Association (e.g., to to ASP2) – do we attempt this. Smells like SS7 Normal Change-over – is this appropriate? Recover Unsent (Tx Buffer) only or also Sent/Unacked.(RTx Buffer). Stringent requirements for duplicated MSUs may impact choice.Other Ideas: •  SCON from ASP to SG to indicate ASP nodal congestion?

  8. Status & Work Plan • <draft-ietf-sigtran-m3ua-02.txt> currently available • Issues List substantially reduced at the Washington Design Team Meeting • Draft 03 addressing above issues end-of-April at latest • Possible Last Call

More Related