kael
Uploaded by
6 SLIDES
206 VIEWS
60LIKES

Wireless Networking with Xbee and Arduino: Lab 5 Overview

DESCRIPTION

This document outlines Lab 5 of the Basic Circuits course, focusing on wireless networking using Xbee modules and Arduino. It includes an agenda covering the Xbee setup, command mode, and AT commands via serial terminals like Coolterm for both Mac and Windows. Following that, the integration of Arduino with the soft serial library to facilitate communication between Xbee and Arduino pins will be explored. Sample Arduino code is provided to demonstrate the Arduino and Processing protocol and help students implement their projects effectively.

1 / 6

Download Presentation

Wireless Networking with Xbee and Arduino: Lab 5 Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Basic Circuits Lab 5 Wireless Networking Xmedia Spring 2011

    2. Agenda Xbee Setup Arduino Soft Serial Arduino and Processing Protocol OSC Messages

    3. Xbee Setup Command Mode and AT Commands Serial Terminal Coolterm (mac, windows)

    4. Arduino Soft Serial Connect rx (receive) from xbee to Arduino Pin 3 (transmit) Connect tx (transmit) from xbee to Arduino Pin 2 (receive) New soft serial library - http://arduiniana.org/2011/01/newsoftserial-11-beta/

    5. Arduino and Processing Protocol

    6. Protocol Sample Arduino Code

More Related