1 / 18

Camera calibration program in the United States: past, present, and future

This workshop explores the history, current state, and future of camera calibration in the United States. It discusses the challenges faced in calibrating analog and digital cameras and the role of different authorities in approving and evaluating calibration methods. The workshop also highlights the efforts of the USGS in stabilizing analog calibration instruments and developing interim digital calibration capabilities.

juliob
Download Presentation

Camera calibration program in the United States: past, present, and future

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Camera calibration program in the United States: past, present, and future U.S. Department of the Interior U.S. Geological Survey Radiometric and Geometric Calibration Workshop

  2. Background: • USGS camera calibration responsibility • Responsibility transferred to the USGS in 1973 • Laboratory calibration using multi-collimators • Calibration instrument designed for metric 230- x 230-mm film-base aerial cameras Radiometric and Geometric Calibration Workshop

  3. Background: • Evolution of digital technology: • Photogrammetric scanners over fifteen years ago • Small-format cameras being used for years by a small sector of the mapping community • Large-format aerial cameras have been in development for years and have emerged • Non-optical sensors playing a bigger role • 1-meter and sub-meter products from satellites Radiometric and Geometric Calibration Workshop

  4. Background: • USGS failure to be prepared for digital cameras resulted in: • Lack of experience with digital cameras • Lack of instrumentation to continue calibrations • Lack of upgrade strategy from analog to digital • Lack of standards and policies Radiometric and Geometric Calibration Workshop

  5. Complicating issues: • Inability to perform laboratory calibration on small format digital cameras • Different designs of digital cameras • Different hardware/software solutions • Integration of cameras with other systems such as IMU and airborne-GPS equipment Radiometric and Geometric Calibration Workshop

  6. The bottom line for calibration: • Ensuring quality of the end-product But: • Who does it? • How is it done? Radiometric and Geometric Calibration Workshop

  7. Current approval authorities: • For now: • USGS (cameras) • USGS and other agency contracting offices (product characterizations) • Future may include: • Government-approved independent evaluators/consultants • UL-type organization Radiometric and Geometric Calibration Workshop

  8. How? • Component calibration (camera calibration) • System calibration (LIDAR systems) • Process evaluation (error budget analysis) • Product characterization (satellite products) • ISO certification (quality management plan) Radiometric and Geometric Calibration Workshop

  9. USGS camera calibration efforts: • Stabilization of analog calibration instrument • Development and installation of interim calibration capability for small-format cameras • Development of in-situ calibration site and software Radiometric and Geometric Calibration Workshop

  10. Analog calibration: Radiometric and Geometric Calibration Workshop

  11. Analog calibration: • Maintain current policy • Continue to provide camera calibrations on a cost recovery basis Radiometric and Geometric Calibration Workshop

  12. Interim digital capability at EDC: Radiometric and Geometric Calibration Workshop

  13. Interim digital capability: • Testing stability of calibrations with USGS camera • Calibration of other cameras on a research basis • Comparison of results with other laboratory calibration methods • Comparison of results with in-situ calibration approach Radiometric and Geometric Calibration Workshop

  14. In-situ calibration: • Initial operating capability to include site preparation, software development, and testing with USGS camera • Operational testing with other cameras for comparisons in stability • Extension of software to allow other in-situ sites Radiometric and Geometric Calibration Workshop

  15. Product Characterizations over NASA Stennis Test Range SSC Remote Sensing Radial Target and Edge Response Targets Radiometric and Geometric Calibration Workshop

  16. Product Characterizations: • Performed under USGS/NASA agreement • First round funded by USGS • Data acquisition over Stennis test site • Data provider generates end-product to be evaluated (e.g., 1-foot resolution DOQ) • NASA performs evaluation • USGS provides acceptance letter Radiometric and Geometric Calibration Workshop

  17. Future work: • Perform radiometry testing • Comparison of calibration methods • Evaluation of product characterizations • Development of in-situ calibration standards • Development of related standards Radiometric and Geometric Calibration Workshop

  18. Contact information: • George Lee, USGS, 650-329-4255, gylee@usgs.gov • Greg Stensaas, USGS, 605-594-2569, stensaas@usgs.gov • Vicki Zanoni, NASA, 228-688-2305, vzanoni@ssc.nasa.gov Radiometric and Geometric Calibration Workshop

More Related