1 / 14

Application Instructions

BonDuitTM Conduit Adhesive is a two-part resin system designed to bond polyethylene, PVC, fiberglass, metals, and composites. It creates durable, airtight, and watertight seals in less than 5 minutes, without the need for special tools or training.

julianed
Download Presentation

Application Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Application Instructions Bonds to Polyethylene, PVC, Steel, Fiberglass, and Aluminum

  2. Description BonDuitTM Conduit Adhesive is a two-part, rapid-cure resin system designed to bond polyethylene, PVC, fiberglass metals and composites. It forms a durable long-lasting, strong bond that is airtight and watertight.

  3. Easy To Use • Create a splice in less than 5-minutes. • No special tools • No special • training needed

  4. BonDuitTM BT-KIT • The BT-KIT contains all material to make a joint. BonDuitTM BT-KITG includes the application tool for applying BonDuitTM.

  5. Cut Conduit To prepare the splice, cut conduit to the desire length. Make a 90o angle cut. Taper edges with a rasp or knife to a 45o angle.

  6. Sanding Conduit Use 80-grit abrasive cloth to sand outside of conduit ½ inch beyond the depth of the coupling.

  7. Sand Coupling Use 80-grit abrasive cloth to sand inside of coupling. Surface should be rough with all polish removed.

  8. Clean Coupling and Conduit Clean sanded surfaces of both conduit & coupling with TRTM Cleaner to remove any oils and displace moisture.

  9. BonDuitTM Cartridge • BonDuitTM Adhesive is packaged in a 1.7oz (50 ml) multi-use cartridge. • Static mixer combines the two parts.

  10. Dispensing Tool Insert cartridge into dispensing tool for an easy, clean way to mix and apply BonDuitTM Conduit Adhesive.

  11. Prime The Cartridge • Prime the cartridge by depressing the handle 1 to 2 times after the material is coming out of the nozzle. This will make sure you are getting an even mixture.

  12. Applying BonDuitTM Place BonDuitTM in a 1/8- to 1/4-inch bead around the outer edge of the conduit.

  13. Placing Coupling on Conduit Immediately twist coupling onto the conduit. Smooth any excess BonDuitTM.

  14. Finished Watertight and airtight seals. High-strength durable bond. Finish in minutes. No special tools or training.

More Related