1 / 8

Connect Your Projector to a Laptop via VGA Cable: A Step-by-Step Guide

Setting up your projector with a laptop is easy with the right connections. Start by connecting the VGA input cable to the VGA jack on the laptop and to Input 1 on the projector. Next, attach the notebook AC adapter to the laptop and plug the projector’s power cable into the power outlet. For remote control as a mouse, connect the USB cable between the laptop and the remote. Power on both devices, and if the display is appropriate, you're set! If not, use the Fn key and F8 to toggle view modes. Switch input sources as required for additional video sources.

julian-barlow
Download Presentation

Connect Your Projector to a Laptop via VGA Cable: A Step-by-Step Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Setting Up Your Projector

  2. VGA Input Cable Connect to the VGA jack on the back of the laptop Connect to VGA Input 1 on the back of the projector

  3. Notebook AC Adapter Connect It to the back right corner of the laptop

  4. Power Cable For The Projector Plug the Male end into the power outlet on the wall. Plug the Female end into the bottom of the projector.

  5. (Optional) If you plan to use your remote as a mouse USB Cable Move the switch to the mouse position Connect the Wide End to the laptop and the Square End to the black box.

  6. Configuring Your Equipment Guide • Connect all the necessary cables to the projector and laptop. • Power on the projector and laptop. • If you get a Display on the projector and the laptop, you have completed the steps correctly. • If not follow these simple steps: • There is key labeled Fn in blue type. It is the second key over from the bottom left side of your laptop keypad. Hold it down and simultaneously press the F8 Key. This toggles through the three different view modes. (laptop only, laptop and projector, and projector only) select Laptop and Projector. F8 Key Fn Key

  7. If you still do not get a display, press the Input Button on the projector or remote so that Input 2 is selected.

  8. (Optional) If You want another Video Source to Display on the projector.

More Related