1 / 1

Electronics and data acquisition system of the extensive air shower

30th International Cosmic Ray Conference, Merida, July 6, 2007. Electronics and data acquisition system of the extensive air shower detector array at the University of Puebla. R. Conde 1 , O. Martinez 1 , T. Murrieta 1 , E. Perez 1 , H. Salazar 1 , L. Villasenor 2

jude
Download Presentation

Electronics and data acquisition system of the extensive air shower

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 30th International Cosmic Ray Conference, Merida, July 6, 2007 Electronics and data acquisition system of the extensive air shower detector array at the University of Puebla R. Conde1, O.Martinez1,T. Murrieta1,E. Perez1, H. Salazar1, L. Villasenor2 1Facultad de Ciencias Fisico-Matematicas, BUAP, Puebla, Pue., 72000, Mexico 2Instituto de Fisica y Matematicas, UMSNH, Morelia, Michoacan, 58040, Mexico villasen@ifm.umich.mx 4. Calibration (Control Experiments) Abstract Field programmable gate arrays (FPGAs) are playing an increasing role in DAQ systems in cosmic ray experiments due to their high speed and integration and their low cost and low power consumption. In this paper we describe in detail the new electronics and data acquisition system based on FPGA boards of the extensive air shower detector array built in the Campus of the University of Puebla. The purpose of this detector array is to measure the energy and arrival direction of primary cosmic rays with energies around 1015 eV. The array consists of 10 liquid scintillator detectors and 6 water Cherenkov detectors (of 1.86 m2 cross section), distributed in a square grid with a detector spacing of 20 m over an area of 4000 m2. The electronics described also makes use of analog to digital converters with a resolution of 10 bits and sampling speeds of 200 MS/s to digitize the PMT signals. We also discuss the advantages of discriminating the PMT signals inside the FPGAs with respect to the conventional use of dedicated discrimination circuits. ~74 pe Decay electron at 0.17 VEM = 41 MeV a) Indoors WCD: MPV of EM peak = 0.12 VEM ~ 29 MeV, i.e., dominated by knock-on + decay electrons PMT Electron tubes 9353 K 1. Experimental Setup Muons deposit 240 MeV in 1.20m high water and only 26 MeV in 13 cm high liquid, while electrons deposit all of their energy. For 10 Mev electrons we expect: Mu/EM=24 for Cherenkov Mu/EM=2.6 for Liq. Scint. EAS-UAP Array (19º N, 90ºW, 800g/cm2) WCD Liquid Scint Outdoors Liquid Scintillator Detector: MPV of EM peak = 0.30 VEM i.e., dominated by EM particles ~ 10 MeV Outdoors WCD: MPV of EM peak = 0.12 VEM ~ 29 MeV, i.e., dominated by EM particles ~ 10 MeV 5. “New” DAQ Electronics PMT EMI 9030 A Communication modules 10-bit ADC running at 200MS/s 16-channel discrimination cards Motherboard based on Xilinx Spartan 2E FPGA Schematic diagram of ADC and Input/Output scheme of VHDL program • 2200m a.s.l., 800 g/cm2. Located at Campus Universidad Autonoma de Puebla • Hybrid: Liquid Scintillator Detectors and water Cherenkov Detectors • Energy range 1014 - 1016 eV 6. Results 2. “Old” DAQ Electronics ADC sampling at 200 MS/s: Two ADCs running 180° out of phaseat 100 MS/s each Trigger: Coincidence of 4 central detectors (40mx40m) NIM y CAMAC. Use of digital Osciloscopes as ADCs Rate: 80 eventos/h Charge vs risetime for a WCD located indoors Charge distribution for background muons Amplitude vs risetime for a WCD located outdoors 3. Monitoring Use CAMAC scalers to measure rates of single partícles on each detector. Day-night variations <10% Conclusions We have described the new DAQ system for the EAS-UAP air shower array. This new system takes advantage of the recent progress on on-chip fast ADCs and the ever faster and more powerful FPGAs. We have achieved “single channel” sampling rates of 200 MS/s at 10 bit by combing these modern advanced with the flexibility provided by on-chip programming using VHDL. The use of cheap GPS embedded receivers allows us to attach a precise time tag to each L2 trigger event for further off-line analyses. s/mean around 3% References J. Cotzomi, E. Moreno, T. Murrieta, B. Palma, E. Pérez, H. Salazar, and L. Villaseñor, The Water Cherenkov Detector Array for studies of cosmic rays at the University of Puebla, Nucl. Instr. and Meth. in Phys. Res. A., Volume 553, Issues 1-2 (2005) Pages 290-294. H. Salazar, O. Martínez, E. Moreno, J. Cotzomi, L. Villaseñor, O. Saavedra, Results from the Puebla extensive air showed detector array, Nuclear Physics B (Proc. Suppl.) 122 (2003) 251-254. J. Cotsomi, O. Martinez, E. Moreno, H. Salazar and L. Villaseñor, Extensive Air Shower Array at the University of Puebla for the Study of Cosmic Rays, Rev. Mex. Fis. Vol. 51 No. 1 (2005) 38-46. [L. Villaseñor and H. Salazar, Separation of Cosmic-Ray Components in Water Cherenkov Detectors, Nucl. Instr. and Meth. in Phys. Res. A., Volume 553, Issues 1-2 (2005) 295-298.

More Related