1 / 18

Project Improvement Ideas

Project Improvement Ideas. Brian Drost Bangda Yang. Project Improvements. Printed Circuit Board Enclosure Automatic Gain Control Increase Maximum Load Power Increase Efficiency Decrease THD Digital Audio Input Wireless Transmission. Printed Circuit Board. Goals:

jonco
Download Presentation

Project Improvement Ideas

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project Improvement Ideas Brian Drost Bangda Yang

  2. Project Improvements • Printed Circuit Board • Enclosure • Automatic Gain Control • Increase Maximum Load Power • Increase Efficiency • Decrease THD • Digital Audio Input • Wireless Transmission

  3. Printed Circuit Board • Goals: • Design a PCB for your amplifier • Advantages: • High probability it will work • Good experience for senior design • Disadvantages: • Costs some money • Need to know how to use the CAD software

  4. Printed Circuit Board • Assistance • Seminar tonight on using PADS (CAD tool for PCB) • Logistics • PCBs could be combined into one panel to save money • Need to finish design early so the PCB can be fabricated before the end of the term (expect 8-10 business days including shipping)

  5. Enclosure • Goals: • Design and build an enclosure for the amplifier & speakers • Advantages: • Good experience for senior design • Disadvantages: • Costs money (a lot of $ if you’re not careful) • More of a mechanical engineering project

  6. Enclosure • Assistance • Seminar sometime on using SolidWorks • Logistics • Can be built on 3D printers • Fabrication time is around 3 days but can get busy

  7. Discrete Transistor Feedback • Goals: • Improve the design using feedback • Greatly improved THD (< 1%) • Precise gain (no dependence on ϐ) • Must be stable • Ideas: • Talk to TAs • Allowed Components: • Same as for prototype

  8. Automatic Gain Control • Goals: • Eliminate output dependence on input amplitude • Speaker volume does not vary with computer volume • Ideas: • Need to detect signal power (multiplier) • Allowed Components: • Opamps • Analog Multipliers

  9. Increase Maximum Load Power • Goals: • Max. load power >0.75 W per channel • Ideas: • Differential output stage • Increase supply voltage • Can run off power supply rather than USB

  10. Increase Maximum Load Power • Load power calculations:

  11. Differential Output Stage • Goals: • Use two output stages differentially to increase output swing • Load power > 0.75 W • Allowed Components: • Opamps • Power transistors

  12. Increase Supply Voltage • Goals: • Use a DC-DC converter to increase the supply voltage • Load power > 0.75 W • Allowed Components: • Opamps & Oscillators (LM555) • Inductors • Power transistors

  13. Differential Output Stage • Goals: • Use two output stages differentially to increase output swing • Load power > 0.75 W • Allowed Components: • Opamps • Power transistors

  14. Class D Amplifier • Goals: • Create a class D amplifier that meets the specs • Power > 0.5 W • Efficiency > 70% • Both channels should be able to run on USB • Allowed Components: • Opamps & Oscillators (LM555) • Power transistors

  15. Digital Audio Signal • Goals: • Audio is transmitted digitally to the amplifier • Ideas: • UART • USB (complicated) • Allowed Components: • Integrated components for digital-audio conversion (microcontrollers, DACs)

  16. Wireless Transmission • Goals: • Receive audio wirelessly OR • Transmit audio wirelessly • Ideas: • Investigate AM or FM transmission/reception • Allowed Components: • Integrated components (except for radio chips)

  17. Project Improvement List • Printed Circuit Board • Enclosure • Discrete Transistor Feedback • Automatic Gain Control • Increase Supply Voltage • Differential Output Stage • Class D Amplifier • Digital Audio Input • Wireless Transmission

  18. Other Ideas or Questions?

More Related