1 / 58

EGN 3373 Introduction to Electrical Systems I

EGN 3373 Introduction to Electrical Systems I. A Systems Approach to Electrical Engineering. Graphics Adapted from “Physical, Earth, and Space Science”, Tom Hsu, cpoScience. Chapter 8 - Diodes. 0. Objectives: Understand diode operation and select diodes for various applications

johana
Download Presentation

EGN 3373 Introduction to Electrical Systems I

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. EGN 3373 Introduction to Electrical Systems I A Systems Approach to Electrical Engineering Graphics Adapted from “Physical, Earth, and Space Science”, Tom Hsu, cpoScience.

  2. Chapter 8 - Diodes • 0 Objectives: • Understand diode operation and select diodes for various applications • Use the ideal diode model to analyze nonlinear circuits • Analyze and design simple voltage-regulator circuits • Use the constant voltage model Application • Most common application is rectification (converts ac to dc) e.g. automotive alternator, voltage multipliers, power conversion • Voltage protection (voltage spikes) e.g. stepper motor • Combination circuits, e.g. logic gates, temperature gauge • More diodes - Used to regulate voltage (Zener diodes), electronically tune radio and TV receivers (varactor diodes), generate radio frequencyoscillations (tunnel diodes), or produce light (light emitting diodes - LED)

  3. Solid-State Electronics Electronics – electrical devices and circuits containing active elements capable of controlling the flow of current If current is thought of as the flow of electrons, the name “electronics” makes perfect sense. 3

  4. Solid-State Electronics For many years, the active components in electronic circuits were thermionic devices called vacuum tubes. Vacuum tubes used electric current to heat a metal filament, which gave off free electrons. The negatively-charged electrons traveled through a vacuum to a positively-charged plate. 4

  5. Plate (+) Cathode (-) Filament Solid-State Electronics The filament produces free electrons. They collect on the cathode. The plate, which is more positively-charged than the cathode, will attract the electrons, thus establishing a positive current flow from plate to cathode. Current cannot flow in the opposite direction. This “one-way valve” is called a diode. electrons + current 5

  6. Plate (+) Grid Cathode (-) Filament Solid-State Electronics Adding a grid and applying a voltage to it gives additional control capability. This tube is called a triode. Multiple grids give additional versatility (tetrodes, pentodes, etc.) 6

  7. Solid-State Electronics Today, vacuum tubes are used only for niche applications (such as very high quality audio amplifiers) or where voltages and powers are very high (like radar). Most electronic applications are implemented using devices that operate in the solid state, not the gaseous state. 7

  8. Solid-State Electronics • Vacuum tubes work very well, but have some inherent issues: • They require LOTS of power to produce the heat needed to liberate free electrons. • They can be miniaturized to the size of a small light bulb, but modern devices require miniaturization several THOUSANDS of times smaller than that. • Because of the degradation of the filament, their useful life is shorter than we would like. 8

  9. Solid-State Electronics • Solid state devices address these issues. • Solid-state devices consume small amounts of power. • Solid-state devices can be minaturized to a very high degree – millions of devices per square centimeter. • Solid-state devices have long lifetimes – for some devices, many tens if not hundreds of years. 9

  10. The P-N Junction Silicon semiconductor crystalline material P-Type silicon doped with impurities containing an excess of positive charge carriers (boron) N-Type silicon doped with impurities containing an excess of negative charge carriers (arsenic) 10

  11. The P-N Junction - - - - - + + + + + Depletion Region or Space-Charge Region Depletion or space-charge region keeps p-type and n-type materials separated The voltage built up across the depletion region of silicon is about 0.7 volts. 11

  12. The P-N Junction VK VA “Kathode” – German for “cathode” Forward-Biased (VA > VK) Bias voltage makes depletion region narrower. Current overcomes the barrier voltage and flows from anode to cathode. (Holes flow from left to right; electrons flow from right to left.) 12

  13. The P-N Junction VK VA “Kathode” – German for “cathode” Reverse-Biased (VK > VA) Bias voltage makes depletion region wider. Current cannot overcome the barrier voltage so no current flows. 13

  14. The P-N Junction VK VA “Kathode” – German for “cathode” A single P-N junction forms a diode. 14

  15. Chapter 8 - Diodes Early Diode • This thermionic valve or vacuum tube is known as the diode • A diode is a two-terminal device. • Diodes have two active electrodes. • The diode allows an electric current to pass in one direction (forward biased condition) and blocks the current in the opposite direction (the reverse biased condition). Thus, the diode acts like an electronic version of a check valve. Structure of a vacuum tube diode

  16. The P-N Junction When charge carriers cross the depletion region, they lose energy. The energy loss results in the release of a photon. If the photon has a wavelength in the range of visible light, the diode is a “light-emitting diode” or LED. We can also make infrared, ultraviolet, and laser diodes. CD, DVD, and Blu-Ray players The first LED; used today for TV remote controls 16

  17. Chapter 8 - Diodes Analogy: Diodes allow current from the alternator to charge the battery when the engine is running, but when the engine stops, the diode prevents the battery from discharging. The diode is analogous to a one-way valve in a fluid flow system. The diode allows an electric current to pass in one direction (forward biased condition) and blocks the current in the opposite direction (the reverse biased condition).

  18. Linear vs. Non-Linear Elements • R, L, C … linear (IV curve) • Diodes, transistors … non-linear (IV curve)

  19. Diodes – What are they ? • Diode or a “p-n” junction • Non-linear • Semiconductor device

  20. Diodes - Applications • TYPES … • Light emitting … LED’s (OLEDs) • Photodiodes (solar cells !) • Zener • Tunnel • APPLICATIONS • Rectifiers • Voltage regulators • Varactors

  21. Diodes Reverse Biased For vD < 0 iD has very small value almost zero current, and is the reverse current Diode is OFF Forward Biased For vD > 0 at small amouts, iD has large value and is the forward current Diode is ON The diode allows an electric current to pass in one direction (forward biased condition) and blocks the current in the opposite direction (the reverse biased condition). As in the automobile battery after being charged via an alternator.

  22. The Ideal Diode

  23. Ideal Diode Model • IDEAL (on-off) DIODE MODEL: • VD > 0 Volts (forward bias); “short-circuit” • VD < 0 Volts (reverse bias):“open-circuit”

  24. Ideal Diode Model Ideal Diode – simple model to approximate diode behavior (complex circuits) • Perfect conductor with zero voltage drop in the forward direction, v = 0 or SHORT circuit (iD >0 Diode ON) 2. In the reverse direction, the ideal diode is an OPEN circuit, I = 0 (vD <0, Diode OFF) Use when we want a basic understanding of the states, not exact analysis

  25. Ideal Diode Model Step by Step Analysis using Ideal Diode • Assume state of Diode, either ON (i.e. SHORT) or OFF (i.e OPEN) • Analyze the circuit to determine the current through the diodes assumed to be ON and the voltage across the diodes assumed to be off • Check to see if the result is consistent with the assumed state for each diode. Current must flow in the forward direction for diodes assumed to be on. Futhermore, the voltage across the diodes assumed to be off must be positive at the cathode (i.e. reverse bias) • If the results are consistent with the assumed states, the analysis is finished. Otherwise, return to step 1 and choose a different combination of diode states.

  26. Ideal Diode Model

  27. Ideal Diode Model

  28. Ideal Diode Model

  29. Ideal Diode Model

  30. Ideal Diode Model R

  31. Ideal Diode Model What is the correct assumption for D3 and D4?

  32. Ideal Diode Model The correct assumption is that D3 is off and D4 is on. Equivalent Circuit

  33. Diode Example • Find I for: • R=1 KΩ • R=10 KΩ • Use Ideal diode model

  34. Diode Example • Find I for: • R=1 KΩ • R=10 KΩ • Use Ideal diode model

  35. Constant Voltage Model • IDEAL (on-off) DIODE MODEL: • VD > VγVolts (forward bias); ???? • VD < Vγ Volts (reverse bias):“open-circuit” VD=Vγ + -

  36. Diode Voltage + VD - A • VD = VAK > 0 • … means forward bias • … it also means that VA > VK • VD = VAK < 0 • … means reversebias • … it also means that VA < VK ID K

  37. Diode Example • Find I for: • R=1 KΩ • R=10 KΩ • Use constant Voltage model

  38. Diode Example • Find I for: • R=1 KΩ • R=10 KΩ • Use constant Voltage model

  39. Diode Example • Find V and I … • Use “ideal diode model”

  40. Diode Example • Find V and I … • Use “ideal diode model”

  41. Diode Example • Find V and I … • Use “ideal diode model”

  42. Diode Example

  43. Diode Example

  44. Zener Diode • Used in Voltage regulators • Typically operated in “reverse bias” (breakdown region) • Designed for “predictable” breakdown voltages

  45. Zener Diode Model • What are the appropriate “forward and “reverse” bias models ?

  46. Zener Diode Model Zener Diode Zener Diodes operate in the reverse breakdown region with sufficiently large voltage and current of large magnitude. If the power dissipated does not raise the device T too high, operation in this region can occur and is not destructive. Application: widely used as voltage references (regulators) and as shunt regulators to regulate the voltage across small circuits. Zener diode continues to conduct when voltage reaches the diode’s reverse breakdown voltage. Predetermined reverse bias breakdown voltage.

  47. Zener Diode - Example • Find VOUT for all VIN • VBR=5.6 V • VΥ=0.7 V

  48. Zener Diode - Example • Find VOUT for all VIN • VBR=5.6 V • VΥ=0.7 V

  49. AC-DC Conversion Device

  50. Subsystem … AC-DC

More Related