1 / 8

How to Set-Up Jumbo Backdrop Stands

How to properly set up <a href="https://www.esigns.com/banner-stands/jumbo-back-drop-stand/">jumbo backdrop stands</a> Hassle-free!

jmesigns
Download Presentation

How to Set-Up Jumbo Backdrop Stands

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Set-Up Jumbo Backdrop Stands

  2. Materials Two [2] metal feet, two [2] large telescoping poles, two [2] small telescoping poles with fixed bolt at end, and two [2] small telescoping poles without fixed bolts.

  3. Attach the flat ends of one large pole to one of the metal feet using a screw. Repeat with the other large pole and metal foot.

  4. Connect one of the small poles with a fixed bolt to one of the small poles without a fixed bolt by screwing them together. Repeat this with the remaining poles. You should now have two long poles with a nut at each of their ends.

  5. Lay the banner out flat and adjust the poles to be wider then the width of the banner.

  6. Insert one long pole through the banner's bottom pole pocket, then attach this pole horizontally to both of the vertical poles with the nuts on either side near the base.

  7. Repeat the actions from previous step for top pole pocket of the banner and attach this using the top holes on the vertical poles.

  8. BIG TEXT

More Related