1 / 2

How to Clean and Maintain a Radiator Filler Neck and Eaton Caps

The radiator is a soft component and needs to be handled very carefully and in such a way that it does not destroy the product. Lifting or holding the radiator by the Filler Neck must not be done at any cost. <br>The center of the Radiator filler neck or caps shall be examined visually for dust particles or any other pollutants that can physically affect the working of the radiator filler neck or caps. In some instances, clean the center using a compressed air blast.<br>The whole process of cleaning the radiator filler neck involves a garden hose with a good jet on the end and on the inside look of

Download Presentation

How to Clean and Maintain a Radiator Filler Neck and Eaton Caps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to Clean and Maintain a Radiator Filler Neck and Eaton Caps The radiator is a soft component and needs to be handled very carefully and in such a way that it does not destroy the product. Lifting or holding the radiator by the Filler Neck must not be done at any cost. The center of the Radiator filler neck or caps shall be examined visually for dust particles or any other pollutants that can physically affect the working of the radiator filler neck or caps. In some instances, clean the center using a compressed air blast. The whole process of cleaning the radiator filler neck involves a garden hose with a good jet on the end and on the inside look of the radiator hose at the center to wash out the insects from the front of the radiator. Warning - Do not use water pressure directly at an angle, and avoid using a pressure washer as both will likely bend the fins over. The radiator can then be cleaned with clean water both inside and outside. The use of a compressed radiator can then be dried air to remove any remaining sediment.

  2. Ideally, radiator filler necks are the foremost tip of vehicle fuel entry. It allows the fuel to get down from the pump nozzle to the fuel tank. Some properties of radiator filler neck are: It is Dual-coated for making corrosion protection more strong It uses special conductive paint to remove static charge if required, it has a ground wire for further precaution Some models come in an improved capless design These are designed to meet the manufacturer’s requirements Lifecycle, temperature, and fuel soak are exhaustively tested to ensure performance • • • • • • Caps Necks manufactures radiator cap filler neck and Eaton caps in various models, specifications, and features and has been the leading aftermarket supplier in the USA for a long time. Eaton Cap is best used for suction and discharge suppliers for diesel oils and other petroleum products. The company has extensive Radiator filler necks in Stainless Steel, Aluminum, and Brass. The filler caps provided by them fit a variety of necks. You can also get hydraulic reservoir tanks, gasket tapes, and utility tanks. Contact: Caps & Necks 6135 Harrison Drive, Unit 6, Las Vegas, NV 89120 Phone- 702-641-3500 Email - sales@powerjetparts.com Website - https://www.capsnecks.com

More Related