1 / 8

Sigurd Skogestad, NTNU Johannes Jäschke, NTNU RPI, 20-22 May 2014

Plantwide process control with focus on selecting economic controlled variables (« self-optimizing control »). Sigurd Skogestad, NTNU Johannes Jäschke, NTNU RPI, 20-22 May 2014. Course Summary. Find active constraints + self-optimizing variables (CV1). (Economic optimal operation)

jesus
Download Presentation

Sigurd Skogestad, NTNU Johannes Jäschke, NTNU RPI, 20-22 May 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Plantwideprocesscontrolwithfocusonselectingeconomiccontrolled variables («self-optimizingcontrol») Sigurd Skogestad, NTNU Johannes Jäschke, NTNU RPI, 20-22 May 2014

  2. Course Summary • Find active constraints + self-optimizing variables (CV1). (Economic optimal operation) • Locate throughput manipulator (TPM) • “Gas pedal” • Select stabilizing CV2 + tune regulatory loops • SIMC PID rules • Design supervisory layer (control CV1) • Multi-loop (PID) ++ • MPC

  3. Plantwide process control • Part 1 (Tue AM): Plantwide control • Part 2 (Tue PM): More on self-optimizing control. Exercise • Part 3 (Wed AM): Consistent inventory control, TPM location, Structure of regulatory control layer • Part 4 (Wed PM): PID tuning • Part 5 (Thu AM): “Advanced” control and case studies

  4. Tue AM Part 1: Plantwide control Introductionto plantwidecontrol (whatshouldwereallycontrol?) Introduction. • Objective: Putcontrollersonflowsheet (make P&ID) • Twomainobjectives for control: Longer-term economics (CV1) and shorter-term stability (CV2) • Regulatory(basic) and supervisory (advanced) controllayer Optimal operation (economics) • Definecost J and constraints • Active constraints (as a functionofdisturbances) • Selectionofeconomiccontrolled variables (CV1). Self-optimizing variables.

  5. Tue PM Part 2: Self-optimizing control theory • Ideal CV1 = Gradient (Ju) • Nullspace method • Exactlocalmethod • Link to otherapproaches • Examples, exercises

  6. Wed AM Part 3: Regulatory («stabilizing») control Inventory (level) controlstructure • Location ofthroughput manipulator • Consistency and radiatingrule Structureofregulatorycontrollayer (PID) • Selectionofcontrolled variables (CV2) and pairingwithmanipulated variables (MV2) • Main rule: Control drifting variables and "pair close" Summary: Sigurd’srules for plantwidecontrol

  7. Wed PM Part 4: PID tuning PID controller tuning: It paysoff to be systematic! • DerivationSIMC PID tuning rules • Controller gain, Integral time, derivative time • Obtainingfirst-order plusdelaymodels • Open-loop stepresponse • From detailedmodel (half rule) • From closed-loop setpointresponse • Special topics • Integratingprocesses (levelcontrol) • Otherspecialprocesses and examples • Whendo weneed derivative action? • Near-optimalityof SIMC PID tuning rules • Non PID-control: Is there an advantage in using Smith Predictor? (No) • Examples

  8. Thu AM Part 5: Advanced control + case studies Advanced controllayer (1h) • Design basedon simple elements: • Ratio control • Cascadecontrol • Selectors • Input resetting (valvepositioncontrol) • Split range control • Decouplers(includingphsicallybased) • Whenshouldthese elements be used? • Whenuse MPC instead? Case studies (3h) • Example: Distillationcolumncontrol • Example: Plantwidecontrolofcomplete plant Recycleprocesses: How to avoidsnowballing

More Related